Column drilling machine

FLOTT E-3 Säulenbohrmaschine

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Bedpfx Asgulr Hjgkowi Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: like new (used), Gillardon pillar drilling machine, type GB 30 V, speed 60 - 1800 rpm, automatic feed, very good condition, tool holder MK 3. Bwodpfxsxpxbce Agkoi

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Bwedpovgmbvsfx Agkei Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point

Condition: good (used), Year of construction: 1986, Offer 23389 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right Bjdpfx Agsrckv Hekjwi - max. distance table - drill spindle 500 mm - max . Distance machined base plate - drill spindle 1050 mm - Column diameter 160 mm - Coolant device - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 328501, Offer 25366 Technical Data: - Drilling capacity: 25 mm - Spindle taper: MT 3 - Spindle speeds: 100 / 205 / 345 / 440 rpm and 695 / 885 / 1450 / 2900 rpm Bwjdpjxu U Susfx Agkei - Spindle stroke: 130 mm - Spindle overhang: 260 mm - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel X-axis: 415 mm - Table travel Y-axis: 155 mm - Drive: 400 V / 0.75 / 0.9 kW - Required space: approx. W 900 x H 1800 x D 700 mm - Weight: approx. 270 kg - Machine vice

Year of construction: 2022, condition: new, angle: 0° - 90° max cutting length: 1370 mm Bodpji Ezr Nofx Agkowi

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement Bwedpfx Aed S Uf Ssgksi capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Bsdpfx Ageda Nqxskswi Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle in stock, available now

Condition: new, Year of construction: 2026, Spindle speed continuously electronically 40-4000 1/min Spindle mount MK 2 Table height adjustment with rack Thread cutting capacity max M10 Setting the thread cutting depth via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 13 mm / 15 mm Drilling depth 60 mm Throw 225 mm Column diameter 60 mm Usable table surface (W x L) 330x250 mm Machine dimensions (W x D x H) 420x450x860 mm Machine dimensions (with VP) (W x D x H) 452x700x1130 mm Weight 62 kg Max. distance Spindle/table/base 300/ 360 mm AC motor with frequency converter 230 V, 0.54 kW OPTION: Drilling package no. 2 - Vice felix, jaw width 80, clamping range max. 120 mm - Keyless drill chuck 1-13 mm mount B16 - Taper mandrel MK II/B16 - Reducing sleeve MK II/MK I Price: € 320.00 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? Bwedoby Swhopfx Agksi WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 2004, The bending press is made in 2004 in Turkey, in the ERMAKSAN factory. The folding press is in good condition, sold with tools. The machines are connected and can be tested and inspected. Specification: Bjdsq U Sdrjpfx Agkewi Model. Year: 2004 Working length: 2600 mm Bending capacity: 80 T Axles: Y1-Y2-X Tools: Yes Weight: 5.5 T Motor: 7,5 kW If you have any further questions, we will be happy to answer them.