Used accessories and spare parts for lathes for sale (283)

Condition: used, Year of construction: 1998, overall weight: 80 kg, Equipment: type plate available, Spindle motor SJ - 11AW - 4M Mitsubishi Year of manufacture: 1998 Weight: 80 kg Nameplate present AC spindle motor, made in Japan, Mitsubishi Electric 4-pole, 3-phase, AMP input 200-230V, 50/60Hz, IP 44 Hnodozq Atljpfx Akrsu Frame B112FU IEC 34-1 1994, Manual No. BNP-B3759 Ambient temperature 0-40°C The motor was installed on a Mazak machine. Price: negotiable Our asking price is €1,950.00 net, ex works, plus packaging costs. Subject to technical changes and errors. Sale exclusively to countries within the EU.

Year of construction: 2003, operating hours: 18,000 h, condition: used, functionality: fully functional, Bar feeder with automatic bar feeding system for bars with a diameter of 3 to 32 mm. It was functioning perfectly until it was replaced with a newer model. It is not possible to see it in operation because it is not connected to the CNC machine. For information on troubleshooting and maintenance, please contact Italmatic, which is the product’s representative in Spain. Hedjzrw Duepfx Akrenu

Condition: good (used), functionality: fully functional, 4 x Wagner ZA 16 1 x Wagner MSD 20 19 mm shank, suitable for, e.g., Revolver Traub TD or Index A 25. List of thread inserts: M 0.8: 2 sets M 1.0: 7 sets M 1.25: 20 sets + 1 set on a Wagner head M 1.5: 7 sets + 2 sets on a Wagner head M 1.75: 5 sets Hodjz H H A Tepfx Akrjnu In total, 44 sets of thread inserts. See also the photos. The heads can be inspected at our warehouse.

Condition: like new (used), functionality: fully functional, mount diameter: 45 mm, Selling approximately 60 various used, some new, and original-packaged tool holders, suitable for a Spinner TTS machine with a BMT45 tool interface, for example. All tool holders are from the brand HEIMATEC. Hnjdpfxezv Rdpo Akrju 8 209 02 003 1x New, in original packaging 8 240 08 021 1x New, in original packaging 8 240 08 057 2x New, in original packaging 8 010 45 126 6x 4 x new, with packaging / 2 x new, without packaging 8 039 45 090 4x 2 x new, with packaging / 2 x new, without packaging 8 030 45 262 2x New, without packaging 8 010 45 127 5x New, in original packaging The list only shows the new tool holders. There are also approximately 40 used tool holders of various designs, but all with a BMT 45 interface. Please take a look at the pictures.

Year of construction: 2006, condition: used, manufacture IEMCA Hedpfx Aozqgikskronu In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, Used Spinner Robobox, used to automate the loading and unloading of Spinner lathes with plastic components. Fanuc M10iD 6-axis robot, 1420 mm reach, 12 kg gripper unit. Barely used. Dual gripper, 5 drawers 800 x 600 mm (3 x 150 mm, 2 x 200 mm height). Hnjdpfx Akozi Elhsrju Safety scanner. Note: Hard drive needs to be replaced.

Condition: like new (used), 3 face plates, cast iron. Each with an outer diameter of 500 mm. Hnedpoz Hpdmefx Akreu 1 unit with through-hole = 128 mm 1 unit with through-hole = 90 mm 1 unit with through-hole = 80 mm.

Condition: good (used), functionality: fully functional, 3 inserts for Multifix, size C, Hedpfx Akez D Sxhorjnu

Condition: used, 2 clamping plates for KK 8, ribbed cast iron plate, diameter 800 mm and 780 mm Hodpoz Ilinefx Akrenu

Condition: used, Industrial furniture MATRIX MAXI Hedoz Hqtpopfx Akrjnu

Condition: used, TECHNICAL DETAILS Hedpfx Asz Hfm Dskronu - Bar diameter : 1 - 18 [mm] - Bar length : 3210 [mm] - Magazine Capacity : 220 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3755 x 420 [mm] - Machine height : 890 - 1250 [mm] - Machine weight : 650 [kg]

Condition: good (used), fixed steady rest with roller inserts 2 pieces; 1 x max. diameter: 200 mm Hodoz E A Enspfx Akrenu 1 x max. diameter: 125 mm Centre height approx. 250 mm Probably from a VDF machine

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Hodpfjzu Tf Tex Akrjnu

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE 1 x set off 4 jaws 410 x 330 x 200 mm Hnjdszc Iavjpfx Akrju MACH-ID 6692 Make: SCHIESS FRORIEP Type: DV DF DZ DKE Year: 1987 set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump 125 mm Length:1200mm Width:800mm Height:400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1981, condition: good (used), Spindle motor for CNC lathe MAZAK SLAT TURN 30, year of manufacture 1981. Hnjdpfx Aoxr Dhyskrsu

Condition: good (used), Tool trolley with inserts Hsdpfx Akjz D Sxujrjnu with turning holder for NC lathe, Shaft: 50 mm

Condition: used, 5 sets of soft top jaws, fixed jaws, RÖHM type: Duro 160/3 Suitable for 3-jaw chucks with a wedge-type shank Chuck diameter: 160 / 180 mm Identification No.: 94008 Jaw length: 86 mm Jaw width: 20 mm Overall height without bridge: 36 mm Hjdjz Rnb Topfx Akrenu Overall height with bridge: 41 mm Groove width: 8 mm Bridge width: 18 mm Hole spacing: 32 mm Bore size: Ø 9 mm (for M8 screws) - 5 sets of steel top jaws - Used jaw sets, varying degrees of wear Dimensions of base jaw L x W x H: approx. 86 x 20 x 41 mm Weight: approx. 5.5 kg Several sets of top jaws available Top jaws suitable for RÖHM, FORKARDT, SCHUNK, or SMW

Condition: good (used), total width: 800 mm, total height: 1,500 mm, total length: 1,400 mm, steady rest CNC Lathe VDF Wohlenberg - U1270 MACH-ID 9187 Hnjdpfszcn Srjx Akreu Make: VDF Wohlenberg Type: U1270 Length:1400mm Width:800mm Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), 3 unused clamping elements Dimensions, W x D approx.: 100 x 150 mm Total height: 91.5 mm Jaw width: 30 mm Lowest support height on jaws: 68.5 mm Hjdpfx Aszwt Rnokrjnu Medium support height: 80 mm Clamping height per jaw approx.: 11.5 mm

Condition: excellent (used), Manufacturer: Indramat spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Rotor: 1MR 310 D-A094/SO20 Stator: 1MS 310 D-6B-A1/SO20 Pn 19 kW P kb 27 kW n N 700 rpm n max 6000 rpm Condition: Used, fully functional 2 units available in stock. Hnedpfx Aov U Ag Djkreu

Condition: used, Year of construction: 2000, Spare parts for the HITACHI SEIKI CNC lathe, type HT 23 RIII, built in 2000. 1. Headstock with chuck. 1. X and Z axis motors. 1. Control panel with monitor. 1. X-Z axis controller. Hedpfx Akowf Aftorsnu 1. VDI 40 tool turret with 12 positions.

Condition: used, TECHNICAL DETAILS Hsdpfxsz Dk N Ej Akronu - Bar diameter : 2 - 20 [mm] - Bar length : 3000 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3990 x 400 [mm] - Machine height : 850 - 1200 [mm]

Condition: good (used), Year of construction: 1986, Metal cutting Tooling VDF BOEHRINGER - DUE 560 MACH-ID 2962 Make: VDF BOEHRINGER Type: DUE 560 Hsdpfxezdixks Akronu Year: 1986 Max. Diameter:150 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, TECHNICAL DETAILS - Bar diameter : 2 - 20 [mm] - Bar length : 3000 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3990 x 400 [mm] Hnjdpfjz Dk Nrex Akrsu - Machine height : 850 - 1200 [mm]

Condition: used, TECHNICAL DETAILS - Bar diameter : 2 - 20 [mm] - Bar length : 3000 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3990 x 400 [mm] Hnjdpjz Dk Nxsfx Akrsu - Machine height : 850 - 1200 [mm]