Panel van

Ford Transit

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Csdpfx Afsvy Aips Ajhc Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² Cedpfxjylyh De Af Ajhc - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: new, Tilting Transfer Table Brand: Pertici Model: BF TEA 20-14 Tilting and extendable assembly table for the production of sashes and frames. Complete with pneumatic retractable roller conveyor. Work surface with profiles equipped with anti-scratch gasket. Codpfx Aey A Imdof Aohc Dimensions: Minimum width: 2,000 mm Maximum width: 3,900 mm Minimum depth: 1,374 mm Maximum depth: 2,400 mm Working height: 932 mm

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm Chjdpfx Afjywzlps Asc -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 4,0 mm distance between columns 2100 mm roll diameter 150 mm total power requirement 7,0 KW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending Codpfxey Ezzys Af Ashc - Foot switch - Emergency stop device

Condition: excellent (used), Pantograph with 2 controlled axes, ideal for machining aluminum, PVC, and steel profiles up to 2 mm, with the option to process stainless steel (optional). The work cycle is managed through intuitive software that guides the operator with simple instructions on the touchscreen display. The USB connection allows for easy linking to a PC. The four-sided rotating worktable ensures very high precision by using shorter tools, thus avoiding through machining and the resulting issues of vibration and noise. It is equipped with a quick tool change system with ISO 30 taper. A retractable, pneumatically operated guard protects the operator during machining. Chodpfx Ajzz Szgof Aoc

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, Lamina GL 1400 Almost as new Year: 2017 Max size: 1400 x 2150 mm Min width: 70 mm Glue type: 2 guns with hot melt by Nordson Cedpewna R Esfx Af Aehc Extras: 2 cold tape guns adhesive Very good condition Available immediately Located: Europe Eastern

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, Copy router Power (kW) 1.5 Voltage (V) 400 Operating pressure (bar) 7 Milling motor speed (min-1) 12,000 Max. Workpiece cross-section W x H (mm) 200 x 100 Milling area L x W (mm) 315 x 130 Immersion depth (mm) 200 Chodstqytijpfx Af Aoc Machine dimensions L x D x H (mm) KF 347 = 1,260 x 820 x 1,650 Weight (kg) approx. 350

Condition: used, Year of construction: 2017, load capacity: 8,000 kg, lifting height: 4,850 mm, total length: 6,460 mm, Gas forklift Linde H 80T/900/396 Codpfx Afey E Ubms Aehc Drive Gas Year built 2017 Lifting height (mm) 4,850 Lifting weight (kg) 8,000

Condition: used, Heavy-duty trailer, used Manufacturer: Steinbock Type BWB Year: 1980 Technical Data: Brand: Steinbock GmbH Moosburg Type: BWB 39 00061 Year of manufacture: 1980 Loading area front and rear each: 2.2 x 1.3 m Trailer is in the middle approx. 1m telescopic Permitted axle load front: 900 kg Chedpfewnm Dfex Af Ajc Permitted axle load rear: 960 kg Permitted payload: 1500 kg Dimensions: L 4.7 plus drawbar x W 1.4 x H 0.6 m Total weight: 1860 kg All information without guarantee. A demonstration is possible at any time in our exhibition hall.