Receiving belt

Forderband Transportband Conveyor

Condition: refurbished (used), Angelus can seamer model 60L Ndodpfxetq Iuke Adned

Condition: new, Year of construction: 2025, Valmec Master 400 brush scaler working width 400 mm maximum working height 300 mm motors 2 x 3 kw conveyor belt with speed regulation on the inverter steel brush + tynex brush included Nsdpfxjgmm Sas Adnjdd suction pipes 2 x 100 mm independent height adjustment of aggregates dimensions: 1300x900x1600h mm machine weight 500 kg

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Njdpjihpn Nefx Adnsdd Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: good (used), Year of construction: 2012, arm reach: 2,696 mm, controller model: KR C4, KUKA Robots Model: KR 90 R2700 pro Technical data Maximum reach: 2696 mm Rated payload: 90 kg Rated supplementary load, rotating column / link arm / arm: 0 kg / 0 kg / 50 kg Rated total load: 140 kg Pose repeatability (ISO 9283): -/+ 0,06mm Number of axes: 6 Mounting position: Floor Footprint: 830 mm x 830 mm Weight: approx. 1058 kg Axis data Motion range A1: -/+ 185 ° A2: -140 / -5 ° A3: -120 / 155 ° A4: -/+ 350 ° A5: -/+ 125 ° A6: -/+ 350 ° Speed with rated payload A1: 136 ° / s A2: 130 °/ s A3: 120 ° / s A4: 292 ° / s A5: 258 ° / s A6: 284 ° / s Operating conditions Ambient temperature during operation: 10 °C bis 55 °C (283 K bis 328 K) Njdpfx Ajtpwxlodnsdd Controller: KR C4

Condition: excellent (used), Year of construction: 2001, Technical Data / Technical Details: Production Line for PIR and PUR Sandwich Panels – Roof and Wall Total Line Length: 155 m Production Speed: 10 m/min Panel Width: 600 – 1200 mm Panel Thickness: 40 – 240 mm (double belt opening 260 mm) Lower Sheet Decoilers: 2 Upper Sheet Decoilers: 1 Corona Treatment: Applied to both upper and lower sheet Slitting (Upper Sheet): 1 unit Profiling: see details below Preheating Station: 2 units, IR heating Primer Application: 1-component system Foaming: High-pressure foaming unit, with low-pressure mixing Additives: 4-component dosing Ndedpfx Adoxpf Iiened Blowing Agent: Pentane Cross-Head: Single head unit Heating (Double Belt): Combination of electric heating and gas burners Side Sealing: With block inserts Saw: Band saw and overlap circular saw Stacker: Included Tilter: Included Wrapper: Included 1–3 x Decoiler, 12 tonnes each 2 x Upper Decoilers with coil cars 1 x Lower Decoiler with coil car 2 – In-line Profiling 3 – Sheet Preheating (up to 70°C) 4 – Primer Dosing Unit 5 – PIR/PUR Dosing Unit (4 components) 6 – Double Cross-Bar System 7 – Siempelkamp Double Belt Press (15 m) 8 – Chain Side Block System 9 – Cutting Saw: Overlap circular saw and band saw 10 – Stacking Unit (for panels up to 12 m length) 11 – Wrapping Unit Disclaimer: The seller assumes no liability for errors in writing or data transmission. The machinery is in condition—visually, technically, and in terms of wear—appropriate to its age; used equipment is sold without any guarantee.

Condition: excellent (used), Year of construction: 2021, Automatic Folding Carton Gluing Machine ETERNA EFOLD 1100 ELITE Year of manufacture: 2021 ETERNA – A Bobst Group Company - Lateral alignment at the feeder (both sides) - Tools and devices for 4-point and 6-point gluing - ERO gluing system (cold glue), year of manufacture 2020 Njdpfx Adow I Ey Denjdd - Pre-breaker Technical details: Paper weight: 200-800 g/m² Total power requirement: 35 kVA

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer Ndodpfxjin Nrge Adned – German production - very good condition – year of production 2004 – DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: good (used), Seamer Ndodpjiba E Dsfx Adnsd Make: Lubeca Typ: automatic 6-head seamer for round cans Model: LW 202 Tooling: can size ø 85 mm – EO lids Capacity: up to 12.000 cans per hour Range: diameter 52-113mm / Hight 50-180mm Frame: cast iron lacquered Power supply: 380 V – 50 Hz – 4 kW Dimensions: L x W x H = 700 x 1.200 x 1.600 mm Weight: 600 Kg as-is or adjusted to customer needs

Year of construction: 1977, condition: used, Make: Angelus Type: automatic 4 head rotary can clincher (1st operation) Ndsdpfoiauldex Adnod Model: 40P Serial no.: 96831077 Build: 1977 Frame: coated mild steel Dimensions: L x W x H = 2500 x 1400 x 2200mm Capacity: up to 12.000 cans per hour Power supply: 380 Volt – 50 Hz – 4,0 kW Features: disc-feed belt-pulley speed regulation machine has a lid magazine Tooling: can size 99 mm

Condition: new, Year of construction: 2025, ⭐⭐⭐⭐⭐ (5.0) ⚡ Top Service | Fast Delivery | Excellent Support ✈️ Delivery Time: Only 8 Weeks ✅ Energy Efficiency Class A+++ ☀️ 2-Year Warranty Buy Directly from the Manufacturer – Benefit from Over 40 Years of Experience in Surface Coating Technology! 💶 Flexible Financing Options: Maintain liquidity with our attractive hire purchase, leasing, and warranty programs. Contact us today for details! 🌀 Mono Cyclone & Jet-Pulse Filter Unit for Large Powder Coating Systems Ideal for operations that require efficient powder recovery: Powder is collected beneath the mono cyclone, sifted through a mesh, and transferred to the color station via pneumatic pumps. From there, it is automatically fed back into the powder coating guns. ✔ Key Advantages: No need for an exhaust air duct Clean and convenient powder recovery process Compatible with all automatic powder coating booths Suitable for walk-in type booths as well Optional: Use the Jet-Pulse filter unit alone for an environmentally friendly, recovery-free setup 🔄 High-Efficiency Recycling Technology Only 4% material loss Maximized powder reuse Ndjdpfx Adedy E A Sensd Fully compatible with Proton MA-RYC-PRO Color Station for optimized performance in automated systems 👉 More details available in our listings or on our website. 🎨 Color Options: Our standard color combinations: Yellow-White Anthracite-White Custom RAL colors are also available upon request – please note that additional charges apply. ✅ Your Benefits at a Glance: Fast delivery in 8 weeks Direct from the manufacturer Energy-efficient (A+++) Comprehensive warranty & support Flexible financing models State-of-the-art powder recovery system