Receiving belt

Forderband Transportband Conveyor

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction is a conveyor belt with a length of 6.5 m and a belt width of 0.5 m. Possibility of transport. Isdpfx Adsra Dufjwetb

Condition: excellent (used), Offered is a used slurry pump / sewage pump. Itjdpfxohwnfcj Adwob SDAG Wismut-Aue. Details see photos.

Condition: ready for operation (used), Year of construction: 2024, The subject of my auction is a conveyor belt with a length of 1x3 m and a belt width of 0.4 m. Possibility of transport. Itodpjt R R T Tefx Adwob

Condition: ready for operation (used), Year of construction: 1996, For sale: conveyor belt as shown in the pictures. Length approximately 30m, belt width 0.8m. The conveyor was in use for about 3 years. Condition very good. Please feel free to contact me. Ijdsulghvjpfx Adwjtb Possibility of transport.

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil Iodpfx Adsupwx Hewetb - Weight: approx. 1,100 kg * 2 = 2,200 kg Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction is a conveyor belt with a length of 1.7 m and a belt width of 0.9 m. Possibility of transport. Iedpfx Adewz Uhrjwotb

Condition: ready for operation (used), Year of construction: 1996, For sale: the conveyor belt shown in the photo. Please feel free to contact me for further information. Itjdpfx Adevb Ilfswjb

Condition: used, operating hours: 20 h, Fuel type: Diesel Itedpfxouu Df Dj Adwsb

Condition: ready for operation (used), Year of construction: 1996, The item in my auction is a conveyor belt with a length of 3.3 m and a belt width of 0.35 m. Possibility of transport. Itjdov Rbrdspfx Adwjb

Condition: ready for operation (used), For sale: conveyor belt as shown in the photos, approximately 8 m in length. Belt width: 0.3 m. Possibility of transport. Ijdpfx Aer Nvx Uodwjtb

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). Iedpfxjq Nfuzj Adwjtb 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: ready for operation (used), Year of construction: 1996, The item of my auction is a conveyor belt with a length of 6m and a belt width of 0.6m. The listed price is for one piece. Possibility of transport. Isdpfx Adswhflbjwjtb

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction is a 5m long conveyor belt, 125 cm wide. Possibility of transport. Possibility of transport. Iodpfxor Drrus Adwetb

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, Isdjlxzl Eepfx Adwetb - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers - container for liquid extracts, etc.

Condition: ready for operation (used), Year of construction: 1996, The item in my auction is a conveyor belt with a length of 7.5 m and a belt width of 0.4 m. A new belt has been installed on the conveyor. Itsdpfx Aoxd Tckodwob Possibility of transport.