Planar disk

Forkardt Ø 610 mm

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. Gbsdpfx Apsmhhypj Deu The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration Gbodpfjtwb U Aox Ap Dsu - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: new, Bernardo Workshop Press WK 20 FH Pro Technical Specifications Pressing force: 20 tons Piston stroke: 185 mm Table width: 170 mm Throat (E): 510 mm Throat (F): 130 mm Distance cylinder - table (F1): 40 mm Distance cylinder - table (F2): 965 mm Cylinder adjustable (M): 175 mm Width (A): 730 mm Depth (B): 560 mm Height 1 (C): 1525 mm Height 2 (D): 1630 mm Weight approx.: 112 kg Features • Standard equipped with a pressing cylinder that can be moved to the left and right • For aligning, pressing, bending, and assembling gears, discs, etc. • Standard equipped with a foot pedal and hydraulic • hand pump for piston advance • Standard equipped with a support prism for aligning shafts Gbsdpfx Ajd Du T Rop Deu • Standard equipped with automatic piston retraction via an integrated return spring • Height-adjustable press table with locking pin • Large-sized pressure gauge for reading the pressing force • Includes a two-stage hydraulic pump • Robust construction due to welded steel frame

Condition: new, table diameter 330 mm table load 350 Kg swivelling range 135 Grad tilt adjustment: manually/mechanicall manuell turning speeds max. 5 U/min stufenlos table load capacity 120 kg. vertikal Gjdpfxeh D Svgj Ap Dobu total power requirement 0,125 kW weight of the machine ca. 52 Kg dimensions of the machine ca. 640 x 490 x 630 m

Condition: good (used), Upper support Sled width 145 mm Gbjdpfx Asdq Nvijp Dsu Height 72 mm Bolt circle 180 mm Centering pin diameter 70 mm Contact surface 240 x 220 mm Weight 23 kg Shipping dimensions: L 490 mm W 220 mm H 270 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 9,000 mm, height adjustment type: electric, grinding belt speed: 25 mm/s, total height: 2,200 mm, total length: 4,640 mm, total width: 2,650 mm, overall weight: 1,200 kg, grinding length: 2,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 Gedpov S Sr Rjfx Ap Dobu The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: new, Load Weight Shelf 20000 kg Loading weight per level 2000 kg Gbedpfx Apofgyg Ts Dju Number of load levels 2 x 5 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm

Condition: used, Outer diameter: 500 mm Gedob Nzi Dopfx Ap Djbu Bore: 95 mm Flange width: 103 mm Mounting, short taper: Size 6

Condition: excellent (used), Technical data for the picking rack: Rack system: Dexion Type: HI280 Technical data for the installation: Number of rack rows: 01 pcs. Rack length: approx. 1,340 mm Gbsdpfx Aon Smvhop Deu Number of bays per rack row: 01 pcs. at 1,290 mm Number of levels plus ground level: 06 pcs. Note: The advantage of a packing table or a picking rack is that all required tools and accessories needed for product assembly are always within easy reach. Scope of delivery includes: 02x uprights, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm Incl. horizontal and diagonal braces Weight per piece: approx. 5.50 kg The uprights are pre-assembled Height: 1,200 mm Depth: 610 mm 06x shelves, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight per piece: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 06x shelf beams, used Overall length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight per piece: approx. 0.84 kg Material finish: Sendzimir galvanized 48x storage bins, used Manufacturer: SSI Schäfer Bin designation: LF 511 G ZW External dimensions LxWxH: 500x156x143 mm Internal dimensions LxW: 448 x 123 mm Weight per piece: approx. 0.785 kg 01x load sign With information on bay and shelf loads, manufacturer and order number Dimensions: 297 x 210 x 2 mm Note: As this is used equipment, damage, corrosion or similar may be present. General product information: This item is offered for collection only. Any requested transport or shipment of this item is subject to additional charges, which can be quoted separately based on delivery location and scope.

Year of construction: 2015, condition: excellent (used), Electric chain hoist, manufacturer: ABUS, type: GM 4 500.6-2, year of manufacture: 2015. Gedsiunb Rspfx Ap Dsbu Load capacity: 500 kg, lifting height: 3 meters. In good condition.