Label printing machine

Gallus T 180 B 01

Condition: excellent (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,083 mm, KODAK Magnus VLF large-format thermal platesetter with MCU multi-cassette unit (four cassettes) New TH 7 laser (August 2022) with only 2,615 laser hours 2400 dpi Z-speed Total imaged printing plates: 395,443 units Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Print Console enabled for all RIP software, server Dell PowerEdge T330 Nwsdpfxoytawno Am Uok

Year of construction: 1994, condition: good (used), Manufacturer: Boge Type: V LEX 45 Nedpfjhtq Dvex Am Uswk Engine: 45 kW Capacity: 6.5 m³/min

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,138 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Steering angle: + - 40° Fuel tank capacity: 540 l Hydraulic tank capacity: 550 l Tire size front / rear wheel: 18.00 - 25 Axle load front / rear axle loaded: 29,400 / 11,600 kg Max. tractive force: 248 kN Drive motor: Cummins QSL9 Max. power: 209 kW/2000 rpm Max. permissible cross slope: 15% Max. permissible gradient: 28% Turning circle outside / inside: 6,713 / 3547 mm Bucket capacity (SAE, piled): 5.4 m³ Maximum speed loaded forward / backward on flat ground: 25.0 km/h Exhaust system: Silencer / catalytic converter Main dimensions: 9,715 x 2,600 x 2450 mm (LxWxH) Front / rear axle load unloaded: 13,100 / 16,900 kg Own weight: 30,000 kg Payload: 11,000 kg Nwodpfx Amjvrd Epe Ujk

Condition: like new (used), Year of construction: 2008, Suprasetter A75, 4up Manufactured: 11/2008 2 laser heads, GEN II 2400 dpi, up to 22 plates/hour Bacher Punch Nedpfx Ajyw N Tbem Uowk Min plate size: 240 x 240 mm Max plate size: 676 x 760 mm With Prinect 7.51 Installed on DELL PC With Stacker Advant 36 Also available with SCL

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Upgrade, autoloader for Heidelberg Suprasetter A74/52 (manual) Automatic plate feed (100 plates) Nwodpfeym A Txex Am Uek Year of manufacture: 2014 Complete with all components. Excellent condition. Installation on request.

Year of construction: 2017, condition: used, Machine Configuration • Unwinder • Spot flexo UV printing unit • 5 × wet offset printing units with CABER system • Semi-rotary screen printing unit • 2 × semi-rotary hot foil stamping units • Additional semi-rotary screen printing unit • Spot flexo UV / hot air unit • Semi-rotary die-cutting unit • Flatbed embossing unit • Flatbed die-cutting unit • Buffer section • Rewinder Printing & Format Max. printing speed: up to 11,000 impressions/hour Web width: min. 130 mm / max. 265 mm Max. printing width: printing width: 254 mm Max. working width: 254 mm Repeat length: • min. 101.6 mm (4”) • max. 254 mm (10”) Repeat accuracy: 0.01 mm Unwind / Rewind Max. unwind diameter: 800 mm Unwind shaft: 3” (max. 300 kg) Optional shafts: 2” (max. 150 kg) 6” (max. 300 kg) Rewind configuration: • Dual rewind: max. 650 mm each • Single rewind: max. 780 mm Core diameter: 3” Drying System UV Drying (IST/UVITerno) UV power: 166 W/cm Air extraction per UV unit: approx. 550 m³/h Total extraction (UV system): up to 2450 m³/h Materials Suitable for Printing Paper: 80 – 180 g/m² Film (monofilm): 0.1 – 0.25 mm Carton: up to 300 g/m² (max. thickness 0.3 mm) Self-adhesive materials (SK): • PE, PP, PET Production Environment Nedpfx Amsziatgo Uewk Minimum operating temperature: 18°C Recommended humidity: 40 – 60% Features & Advantages • Multi-process printing (offset + flexo + screen + hot foil) • High precision register control • Semi-rotary converting capabilities • In-line finishing (die-cutting, embossing) • Suitable for high-quality label production • Flexible configuration for complex label jobs

Year of construction: 2010, condition: ready for operation (used), A Kodak thermal computer-to-print system with peripheral devices is available. Workflow: Prinergy EVO RTPO, laser wavelength: 830nm, imager sides: 6, cassette drawers: 3, punching heads: 4, max. plate dimensions X/Y/Z: 762mm/685mm/228mm, resolution: 3048dpi, screen ruling: 250lpi, repeat accuracy: +/-5µm, production capacity: approx. 17plates/h, max. cassette capacity: 180. System dimensions X/Y/Z: approx. 3350mm/1850mm/1850mm, weight: approx. 2000kg. Including a multi-cassette unit MCU U/G, 6-side thermal platesetter Magnus 400 II S, plate transport unit, plate stacker transfer, printing plate stacker 860, Kodak Compressor with Atlas GX2FF and washout unit with collecting tray Agfa Azura C 95. The autoloader has a suction problem with the printing plates. Documentation available. An on-site inspection is possible. Njdpfx Amey N Uxao Uswk

Condition: excellent (used), Year of construction: 2010, operating hours: 1,318 h, functionality: fully functional, input voltage: 240 V, input frequency: 60 Hz, We offer a used Kodak NX Imager, model Flexcel NX Digital Flexographic System, year of manufacture 2010. Machine set includes: • Imager (Exposing unit) • Laminator • Vacuum cleaner Bonus: Densitometer Machines are in excellent technical condition Laser: 1,318 h, like new, tested Checked and secured for transport by authorized Miraclon service, documented with invoice RIP station requires update due to Windows 10 Full documentation included Cabling, TIL input glass included (disassembled for transport) Laser secured by Miraclon, also disassembled for transport Njdpfx Ameyrr I Ao Uewk Serial number: TT0531 Date of manufacture: 2010/09/15 Model: TST Rated voltage: 200-240 V Frequency: 50/60 Hz Rated current: 8 A Country of manufacture: China For any questions or if you require additional information, please contact us via email or telephone.

Condition: excellent (used), Year of construction: 2018, Ref: 11136. 2018 Scodix Ultra Pro B2+ digital embellishment press designed to apply raised UV, spot varnish, metallic, foil and other premium effects to digital or litho printed sheets. Used for luxury packaging, book covers, greetings cards, high-end commercial print etc. Features: The Ultra Pro differs from the standard Ultra by offering: • Up to 4 polymer tanks • Automatic polymer switching • Ability to change between different embellishment polymers without manual cleaning • Support for multiple embellishment types on one platform This makes it much more productive if you regularly switch between: • Raised Scodix Sense • Flat Spot UV • Metallic effects • Digital foil • Other speciality polymers The Ultra Pro can produce: • Raised Spot UV (Scodix Sense) • Flat Spot UV • Digital Foil • Metallic effects • Variable Data Enhancement (VDP/VDE) • Cast & Cure • Crystal effects • Braille • High-gloss textures Specification: Maximum sheet size 545 × 788 mm (B2+) Minimum sheet size 297 × 420 mm Maximum print area 504 × 748 mm Speed Up to 1,250 B2 sheets/hour Resolution Up to 2,540 × 450 dpi Registration 4 CCD camera Scodix RSP™ (Rotate, Scale & Position) Polymer thickness 5–250 microns Stock weight 135–675 gsm Maximum stock thickness 700 microns (0.7 mm) Supported substrates Offset, digital, laminated, coated, plastics and PVC Nwsdpfx Amezq Hmpo Uok Variable data PDF workflow with optional barcode system Machine dimensions: 6,327 × 1,788 × 1,889 mm Weight: approximately 4,400 kg Power: 3-phase, 220V, average 13.5 kVA (30 kVA max) Compressed air: 7 bar regulated

Condition: used, Year of construction: 2020, Digital UV Coating and Finishing System MGI JETvarnish 3D Evo 75 Maximum sheet size: 1,200 × 750 mm Processable material: 135–800 g/m² Coating unit: Nsdjzqyrrepfx Am Uswk 135–400 g/m² Suitable for coated and uncoated papers and cardboard, pre-coated as well as laminated/cashed substrates, and suitable plastic media. Coating: Varnish High-Gloss clear coat 18-liter tank Coating layer thickness: 7–232 µm Digital UV coating finishing, partial and full-area coating, as well as 3D/relief coating effects. Machine is operational and available for immediate delivery. Location: Western Europe Price on request.