Decanter Centrifuge

GEA CD 350-00-00

Condition: like new (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 3,000 mm, total width: 2,400 mm, total length: 6,000 mm, energy consumption: 35 kWh, Equipment: documentation/manual, Vacuum Evaporator – 57,000 L/Day | Industrial Wastewater and Process Water Treatment General Description The vacuum evaporator offered here (57,000 L/day) originates from a project for the treatment of process water and fermentation residues in a biogas producer consortium in southern France. The plant was fully installed but never commissioned and is in as-new, factory-preserved condition. It is immediately available. The evaporator is designed as a thermally efficient vacuum system and serves for the volume reduction, concentration, and recovery of water-containing liquid wastes. In combination with downstream reverse osmosis, it is ideal for applications requiring both clean distillate and highly concentrated nutrient or brine solutions. Psdpfownbxdsx Ab Iegw Technical Data (Evaporator 57,000) Type: Vacuum evaporator, thermally heated Manufacturer: Blue Water Plant Year of manufacture: 2020 Capacity: 57,000 L/day (approx. 2,400 L/h) Operating pressure: < 0.2 bar (vacuum mode) Heating medium: Hot water / steam Material: Stainless steel AISI 316 / 304 Control system: Siemens S7-1200 PLC with touch panel Energy consumption: approx. 45–55 kWh/m³ (depending on feed water) Condition: As new, factory preserved, unused Fields of Application • Biogas and digestate treatment – recovery of nitrogen concentrates • Landfill leachate treatment – reduction of wastewater volume • Chemical & pharmaceutical industry – process water treatment • Food industry – cleaning and reuse of rinse and process water • ZLD systems (Zero Liquid Discharge) – final stage concentrate evaporation Advantages • High thermal efficiency through vacuum operation • Robust stainless steel construction (AISI 316) for aggressive media • Fully automatic control (Siemens S7 + touch HMI) • Low maintenance, long-life components • Ideally compatible with RO systems (double pass integration) • Immediately available – optional refurbishment, acceptance testing & 1-year warranty Special Features • System was part of an integrated plant with SIMPEC RO 8000 44 8 • Never in operation, fully documented and preserved • Location: Southern France (dismantling & transport by RIEFILT GmbH can be arranged) Price & Scope of Delivery Price: On request Scope of supply: Evaporator 57,000 + control system + documentation Optional: Refurbishment / Factory acceptance / 1-year warranty RIEFILT GmbH – Industrial Water Solutions

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m Pgodpfx Aocxxrgjb Ijw surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Condition: used, machine/vehicle number: 0001210226, pattern table size: 236 x 460 mm working table size: 200 x 500 mm working area longitudinal: 300 mm working area cross: 160 mm spindle turning speed range: 1900 - 15000 rpm Pgodobv S Elepfx Ab Iow milling proportion: 1 : 1 105x165/1 : 5 44 x 80 mm space needed: 800 x 900 x 1250 mm weight: 340 kg

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Podpfx Absh Uyg Ne Ijgw

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. Podsppyhtepfx Ab Iogw The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Year of construction: 2005, condition: like new (used), functionality: fully functional, empty load weight: 1,600 kg, maximum load weight: 1,000 kg, inner dimension height: 1,200 mm, inner dimension length: 1,390 mm, inner dimension width: 1,390 mm, nominal power: 64,000 kW (87,015.68 HP), pump capacity: 500 l/min, pump pressure: 4,50,000 bar, water tank capacity: 800 l, machine/vehicle number: 25191, A machine for industrial cleaning of machinery and parts. It has 3 washing chambers, one main and 2 auxiliary. The technical condition of the equipment is excellent - used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 List of main parts of the machine: Door to washing chamber (on cylinders). Upper washing nozzle Lower washing nozzle Pressure piping Control cabinet Washing pump Auxiliary pump 1 Auxiliary pump 2 Water heater (for each chamber) Drain valve Water level sensor Basket for washing elements Oil separator Steam vent Water pressure indicators Automatic water filling and chemical dosing system Pgodpfx Aorkz Stob Isw In addition, we offer a reverse osmosis water filter in the set.

Condition: new, Year of construction: 2023, Cast resin, epoxy dry distribution 3 phase transformers manufactured by SEA Italy, 2 pcs 800kVA, 6000 ( ± 2 x 2,5 %) /400V; Dyn1, IP00, year of production 2023, ecodesign 2, project documentation and rutine protocol, manuals, unpacked, warranty. Pedpfxondn Hrs Ab Ijgw

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Pgedpfx Aelf Ek Dsb Ijw

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, workpiece weight (max.): 12,000 kg, total height: 48,500 mm, total length: 85,800 mm, total width: 56,000 mm, table width: 2,400 mm, table length: 3,020 mm, overall weight: 20 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 960 mm, spindle nose: ISO 50, tool length: 350 mm, tool diameter: 127 mm, Equipment: documentation/manual, rotational speed infinitely variable, Gantry vertical machining centre "AWEA LP-3025" with HEIDENHAIN TNC 640 Pgedpjrl Svrsfx Ab Iow

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Pgodpfx Absg Eglps Ijw Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.