2014 Genie Gs1532 6.80 mtr wh siccorlift

Genie Gs1532 6.80 mtr wh siccorlift

Condition: used, functionality: fully functional, Year of construction: 2008, power: 11.3 kW (15.36 HP), Equipment: trailer coupling, JOHN DEERE GATOR 6x4D Dwodpey N Uxtsfx Apteb Year: 2008 11.3 kW diesel 512 kg 32 km/h - All-wheel drive (6x4) - Differential lock - Electric tipper - 3 axles - Good tyres - Lighting system - Immediately operational - Original paint - No documents and not road-legal Sale price: 6,950,-- net Affordable delivery available!

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 -Speed: 1474/81 rpm at 50 Hz, see photo type plates Dedpfx Aot Drkyjptewb -Power: 15 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Condition: new, functionality: fully functional, mileage: 0 km, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Year of construction: 2025, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Dedpfx Aew Ufploptowb Payload (kg): 650 Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, Year of construction: 2026, Container rotating device, welding table, welding rotary table, roller stand 1000 kg load capacity Dodpegu Edvjfx Aptewb Distance and rollers adjustable with foot-operated remote control Speed continuously adjustable from 80 to 1600 mm/min. Diameter 20 mm to 700 mm.

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. Dodpfx Asulzcheptewb - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 17cm Djdpfxorblx Hs Aptjwb - Weight 570kg - PTO speed: 540 rpm - HP tractor: 40 - 100 HP

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 16 h, Powerful mini dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 16h Year of manufacture: 2025 SCHORR RR500DHKASH PRO tracked dumper – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - Hydraulic bucket for self-loading - Hydraulic scissor lift (discharge height 1.44m) - 500kg payload - Large and high-quality tipping trough with a wide tipping angle - Foldable rider platform as standard - 6+2 gears The SCHORR RR500DHKASH tracked dumper features a hydraulic tipping drive and a payload of 500kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The RR500DHKASH's special features include its hydraulically controlled scissor lift function and self-loading bucket. This allows you to effortlessly load material and discharge it up to a height of 1.44 m – ideal for trailers, containers, or other elevated areas. Thanks to its slim design (825 mm), the mini dumper can also navigate narrow paths, making it an extremely flexible means of transport. The mini dumper's powerful track drive allows you to easily negotiate rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the tipping body/box is effortless and effortless thanks to the hydraulic tipping drive, even when fully loaded. With a robust body made of heavy-duty sheet metal and a straight discharge outlet that ensures quick and easy discharge, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on slight inclines is also no problem. The large tipping angle ensures that even fully loaded skips are completely emptied without manual assistance. This saves time and effort, making the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR500 Model: DHKASH Load capacity: 500 kg Tilt drive: Hydraulic (stepless) Drive: Chain Weight without/with packaging: 439 / 464 kg Drive Engine: Air-cooled single-cylinder four-stroke engine (OHV) Starter: Recoil starter Power: 9.2 hp Transmission: 6 forward gears / 2 reverse gears Speed Forward gear: max. 8 km/h Reverse gear: max. 5 km/h Basic dimensions Total length of platform folded: 2320 mm Total length of platform unfolded: 2520 mm Total width (including bucket): 825 mm Total height retracted/extended: 1230 / 1620mm Total height at maximum bucket tilt (90°) retracted/extended: 1780 / 2400mm Container dimensions (internal dimensions): 740 x 665 x 435mm Container dimensions (external dimensions): 1060 x 710 x 520mm Bucket dimensions (internal dimensions): 650 x 320 x 300mm Track width: 710mm Loading volume (liquid): ~ 200L Loading volume (heaped): up to 370L (depending on load) Filling height Side: 1030mm Front: 810mm Discharge height min./max.: 810 / 1440mm We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and helping you with your consultation. Dwedpfxswh Nvkj Aptsb

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Dedpfxowwip Aj Aptowb Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2020, Cantilever racking, single-sided, 6.30m high, 1.20m arms, 900kg per arm – new: Price ex warehouse including loading! 1 racking unit with 4 uprights €3,732.00 (net)! Transport costs within Germany (excluding islands): €490.00 (net)! A cantilever racking system, hot-dip galvanized, consisting of: Racking uprights, single-sided, approx. 6,300 mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable racking arms each Load capacity with load center of gravity at 600 mm: 900 kg per arm / 4,000 kg per upright with 4 uprights per arm level: 4 x 900kg = 3,600 kg Profiles: Frame: IPE220, Arms: IPE 100 with longitudinal and diagonal braces e = 1300mm, standard is 1.30m. Other standard lengths available in stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge will be added to the stated price for lengths from 1.50m onwards! Special sizes (different center distances) are also available on request, but they also incur a surcharge and have a longer delivery time as they have to be manufactured to order! If you do not specify any different center distances, we will supply the racking with a center distance of 1.30m. In this case, the length of a racking row with 4 uprights (3 bays) is approx. 4m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors. Dwsdpfx Apsfivg Setjb Other configurations (frame height, arm lengths, arm types, etc.) can be selected! Please contact us!

Condition: used, Technical details: cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm burner heads: 2 Stück weight of the machine ca.: 6,7 t Autogenous flame cutting machine with table. With corresponding additional equipment, the following processes can be performed: Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Height drive: - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Dedeu Nwfuopfx Aptswb Heat exchanger: -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *