Used Dvpn 75 for sale (6,532)

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h Fodpoua Eu Nefx Adrspk

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW - main motor: 90 kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm Fjdpfozrmw Dex Adropk - total weight: approx. 11,000 kg – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), The ZEVATRON HTT 75/300 is a professional soldering station designed for automatic dip soldering of electronic components, wires, and sub-assemblies that require a repeatable soldering process. The unit is equipped with two independent soldering pots with electronic temperature control, an automatic working manipulator, and a control panel with a touch screen for programming operating parameters. The machine was manufactured in Germany in 2016 and is used in the production of electronics, research and development laboratories, and industrial plants. The working enclosure is equipped with a protective cover and a port for connecting a fume extraction system. Technical specifications: Manufacturer: ZEVATRON GmbH Model: HTT 75/300 Type: Tischlötautomat (automatic soldering station) Year of manufacture: 07/2016 Power supply: 230 V / 50 Hz Power: 920 W Rated current: 4.0 A Two independent soldering pots (Soldering Bath A and Soldering Bath B) Two electronic temperature controllers Operator panel with touch screen Programmable operating parameters Fpodjzmap Aopfx Adrek Automatic manipulator for immersing parts Emergency stop button (E-STOP) Port for connecting a fume extraction system Operating manual included

Condition: like new (used), Generally overhauled machine Price: 4.500EUR Dough mixer With paddle Kemper The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Fedpfsx N Efqjx Adrjpk Automatic timer Capacity: 180 liters / 120 kg of dough or 75 kg of flour

Year of construction: 2025, condition: like new (used), Replacement shafts for Lindner Urraco 75 for sale High-quality replacement shafts for a Lindner Urraco 75 shredder are for sale. Fpodpfx Ajzphiiodrok – Application: Old wood, household and commercial waste – Condition: New / very good condition Design: Original Lindner shafts, not replica shafts The shafts are ready for immediate use. The price stated is net. Notes: • Sale is made excluding any warranty or guarantee. • No returns or renegotiations. • Subject to prior sale. All information is without guarantee. The seller assumes no liability for any errors, omissions, or changes to the information. The sale is made exclusively subject to prior sale.

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Fpjdpfxeyxtfwo Adrek Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: excellent (used), REMS Cut 110-75-50 Fjdpfx Adoy Rt Icerspk

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Fpjdovyuy Hopfx Adrok Material flow rate 1.8 m/s; Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Year of construction: 2001, condition: good (used), 2 units of axially split spiral casing pumps with motor and baseplate. Last application as a turbine. !!! Performance curves as a pump and as a turbine are included as images !!! Manufacturer: KSB Type: Omega 350-360 A Flow rate: 1728 m³/h Head: 32 m Fsdpfxod Nqi Ro Adropk Speed: 1450 rpm Year of manufacture: 2001 In turbine operation: Motor: VEM G21R 280 S4 Power: 75 kW at approximately 20 meters head and 1600 m³/h Voltage: 400 V In pump operation: Required shaft power: 177 kW Required electric motor: 200 kW NPSH value: 6.9 Efficiency: 85.28% Maximum operating temperature: 140°C Speed sensor: Yes !! Price per unit !!

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 60 l, axle configuration: 4x4, emission class: euro2, Year of construction: 2025, Equipment: all wheel drive, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 3,908cc Torque: 257 Nm @ 1400 rpm Dimension: 3,660 X 2,010 X2,400 Gearbox type: 8F + 2R partially synchromesh No. of cylinders / aspiration: 4 / naturally Capacity (cm³): 3,908 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 54.7/75 Max. torque (gross) (Nm@rpm): 257 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 1.03 Optional without creeper (F+R) 12+3 Speed range (kph) 2.14 - 31.85 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1500 Maximum lift capacity at ball ends with assist arms (kg) 2000 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3275/4200 Fsdsy Tyc Sspfx Adropk = More information = Number of cylinders: 4 GVW: 2.700 kg Wheelbase: 216 cm

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Fsdpfx Adjztmx Derspk Drive motor 55 kw

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, The system comes from current production. TECHNICAL DETAILS Screw diameter: 2 × 75.0 mm L/D ratio: 38 D Design: Co-rotating MACHINE DETAILS Control system manufacturer: Siemens Fpedpoztw Agefx Adrek Drive power: 180 kW EQUIPMENT 2 dosing units Water bath Granulator Vacuum degassing Segmented screws and cylinder

Condition: used, Screw compressor Manufacturer : KAESER Model : CS121 Fpodpfjv Aha Esx Adrok Output pressure: 7.5 bar Capacity of one booster: 750 m3/h Year of manufacture: 2000 Technical condition: used machine, operational

Condition: ready for operation (used), Baldor BSM3R-3-75-B14 servo motor. 20536, serial number: BFDUB7493, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Fsdei D E Auopfx Adropk

Condition: ready for operation (used), Emod VK50 / 22-75 flat engine, serial number: 7651600, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fjdpfoi D Hu Ejx Adrspk

Condition: new, BEKA Baier + Köppel MZN 12-75 A gear pump, serial number as shown in the photo, unused, 100% functional, scope of delivery as per photos. Fpsdpfx Asi D E Iysdrjk

Condition: ready for operation (used), Baldor BSM 3R-3-75-B14 servo motor. 20536, serial number: BFDUC9322, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fpjdji D Ez Espfx Adrek

Condition: ready for operation (used), Emod VKN50 / 22-75 flat engine, serial number: 8228009, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fpsdpei D Hu Nofx Adrek

Condition: ready for operation (used), GMN TSE 75 cdu x 200 high-speed spindle, SP: 12-18-30000 RPM, serial number: R336458, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fodpji Eaa Hofx Adropk

Condition: new, Bosch SPM 75-TD spindle module, serial number, unused, 100% functional, scope of delivery as shown in the photos. Fedpfxsi D Ugme Adrepk

Condition: new, Bühler FC-T G 1/2-75-DC-01/250 fluid control terminal with integrated level and temperature monitoring, unused, 100% functional, scope of delivery as shown in the photos. Fpedpfx Aoi D Ulysdrjk

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Fedpoiivgyefx Adrspk Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: used, Year of construction: 2021, Chamber dryer for recycled plastics. Manufacturer: Creative Machine Building Center Year of manufacture: 2021 Power supply: 400 V Power: 75 kW Fsdpfx Aeztzzgjdrjpk Capacity: 700 kg/h (soft plastics) 1000 kg/h (hard plastics) External dimensions of the machine: - length: 4,000 mm - width: 1,500 mm - height: 2,600 mm Includes a belt conveyor. Technical condition: used

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Fodpfx Asiyya Aodropk Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable Fpjdpfx Ajiyx Uzsdrek 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available