Scissor lift

Genie Z-45/25J RT

Condition: used, Year of construction: 2024, operating hours: 95 h, maximum speed: 40 km/h, Operating hours: 95, First registration: 15.01.2025 Basic Equipment / Technical Data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to tool carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg - Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversible fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive - Pump: electronically controlled with variable displacement - Motor: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral hydraulic oil HVI 46 - Transmission: 2 gears, electrohydraulically controlled - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap belt - ROPS/FOPS-certified - Heating - Front, roof and rear windshield wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector switch - CS = hydropneumatic cab suspension Dodpjuycgfefx Addola Telescopic Boom - 2-part telescopic boom with electronic end position damping (Soft Stop) Attachment - Quick coupling system type "ZM2", hydraulically controlled from the cab Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle fixed - Rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels, automatically acting parking brake when the engine is off Chassis - High-strength steel frame design Hydraulic System - Load Sensing pump with variable displacement - Work hydraulics flow rate: 150 l/min - Hydraulic fan flow rate: 46 l/min - Total flow rate: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stabilisation Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signal, attachment recognition, and overload shutoff Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo-assisted brake - Hydraulic oil cooler - Rear mounting plate for trailer hitch (AHK) - Hydraulic reversible fan - Radio pre-installation - Work lights on cab (2 front, 2 rear) - Preparation for additional function at boom head - 2 hydraulic connections at boom head - Load protection grate on tool carrier - Lighting for road use - Automatic battery main switch - Electric connection cable in boom - Acoustic warning signal when reversing - Boom support cylinder for securing Optional Equipment - EU approval as tractor 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection - Air conditioning - Boom suspension (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights at base of first boom section - ASC

Condition: new, Year of construction: 2024, Genie S-45 Trax-XC (Xtra Capacity, up to 454kg load capacity), new, used, demonstration machines available Dsdpfjrpzguex Addsla

Condition: used, Year of construction: 2016, operating hours: 2,700 h, fuel type: diesel, mast type: telescopic, Machine ready to work Dsdpfx Adouqu Rijdsla Feel free to contact me

Condition: used, Year of construction: 2016, Lifting capacity 5500kg/8.60mtr. 500/70R24 30% 176l/min Hydraulics Air conditioning tinted / windows / Djdpfx Ader Ii T Tsdela

Condition: new, Year of construction: 2024, Genie Z-45FE hybrid articulated boom lift, new, used, demonstration machines available Dledpornqpwsfx Addsa

Condition: used, functionality: limited functionality, Year of construction: 2013, operating hours: 4,565 h, lifting height: 21,800 mm, lifting power: 227 kg/m, fuel type: diesel,

Condition: used, Year of construction: 2023, operating hours: 86 h, machine/vehicle number: Z45EM-1703, axle configuration: 4x4, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.397 kg Mast: articulated arm Lifting capacity: 300 kg Working height: 1.600 cm Max. horizontal reach: 700 m Dledpetr Htnjfx Addsa Transport dimensions (LxWxH): 6.11x2.29x2.29 Please contact PFEIFER GROUP for more information

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2022, operating hours: 2,160 h, Operating hours: 2160, First registration: 24.05.2022 Year of manufacture: 2022 Approx. operating hours: 2,200 Max. lifting capacity: 3,300 kg Max. lift height: 6,600 mm Max. outreach: 3,500 mm Length to attachment carrier: 4,310 mm Width: 2,100 mm Height: 2,120 mm Total weight with forks: 6,500 kg Total weight without forks: 6,330 kg Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled Power: 85 kW (115 hp), 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive: Pump: electronically controlled with variable output Engine: variable displacement motor EPD TOP incl. with optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission 2-speed, electrohydraulically controlled Max speed 1st/2nd gear: 16 / 20 km/h; optionally 40 km/h Cab: Closed cab, split door 360° all-round visibility GRAMMER air-suspension seat with lap belt ROPS/FOPS certified Heater Front, roof, and rear wipers Dsdpeupq Tqefx Addela Sun blind 4x1 joystick (electronic, capacitive release) incl. travel direction switch Telescopic boom: 2-stage with electronic end position damping (Soft Stop) Attachment carrier quick-change system type "ZM2," hydraulically operated from cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle fixed, rear axle oscillating Brake system: Servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine stops Hydraulics: Pump with variable flow (LOAD SENSING) Working hydraulics flow: 125 l/min Hydraulic fan flow: 46 l/min Total flow: 171 l/min Working pressure: 210 bar Flow-sharing control block Electrics: 12 V system 100 Ah battery 120A alternator Stabilisation control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signals, attachment recognition and overload shutoff Optional equipment: Tires: 400/70-24 158A8 Rear hydraulic connection with separate control EU approval as tractor/agricultural tractor, 40 km/h Trailer hitch, height adjustable, self-locking, 30/32 mm pins, incl. connection for trailer lighting Air conditioning Boom suspension (B.S.S.) LED beacon on cab roof (approval responsibility of customer) LED work lights on cab (2 front, 2 rear) replacing standard halogen headlights 2 work lights at the end of the first boom section (base boom) ASCS upgrade: display with all ASCS functions + constant flow front Location: Molitor GbR

Condition: used, Year of construction: 2021, machine/vehicle number: C300000126, Weights Dsdpfx Adoud Hdgsdjla Empty weight: 8.055 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 1.800 cm Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Outrigger Max. horizontal reach: 1065 m Transport dimensions (LxWxH): 7.77x2.35x2.27 Additional information Please contact PFEIFER GROUP for more information

Condition: new, emission class: euro5, mast type: telescopic, Condition: New machine Warranty: 12 months manufacturer's warranty Year of manufacture: 2024 Operating hours: on request Engine: FPT Turbo Diesel (AdBlue/DPF) Power: 128 kW = 172 HP Drive: 4x4 all-wheel drive Emission standard: Tier 4f / Stage V Lifting/Load capacity max.: 19,000 kg Lifting height max.: 10.20 m Boom type: Telescopic boom with 1 extending section Overall length: 6.8 m Overall height: 2.93 m Overall width: 2.55 m Weight: 24,500 kg Tyres: Wheel set 16.00-25 CEAT 32PR Key features: • Anti-tip system with locking of dangerous movements • Hydraulic connector for optional attachments at boom head • Soundproof, closed cab with heating, approval ROPS – FOPS • Rear axle with limited slip differential (45% slip limitation) • Hour meter, diesel particulate filter (DPF) clogging level • Joystick capacitive sensor system & deadman's switch • Joystick control 4-1 flow sharing (proportional control), including forward/reverse/neutral selector on joystick • Inch pedal for precise (oil distribution between drive and working operations) • Level compensation with movement lock when boom is raised • Air-suspended seat • Fixed Dieci equipment carrier plate with hydraulically operated double quick coupler from the cab • DAB radio • Semi-automatic air conditioning • Immobilizer • FNR lever (forward-neutral-reverse) below the steering wheel & on the joystick Djdeumv Inspfx Addjla • LED work lights on boom head • Pair of front swiveling LED work lights on cab • Pair of rear swiveling LED work lights on cab • Halogen road lights (front and rear) • Steering alignment warning light (aligned axles) • Reversible fan • Sideshift carriage complete with fork pair 200 x 95 mm, L = 2400 mm, load capacity 21 t Leasing/financing/hire purchase through leasing partner available This offer is non-binding and subject to change. We are happy to demonstrate the machine and make you a tailored offer. The machine has CE certification and all documents are available. No liability for input errors. Subject to prior sale and confirmation.