Bandsaw - Horizontal

GERD WOLFF KMS 280

Condition: new, Year of construction: 2025, saw band length 3660 x 27 x 0,9 mm cutting width 0,9 mm Njdpfx Aoy S Drzsfljcw total power requirement 1,5 kW / 300 Nm weight of the machine ca. 1200 kg dimensions of the machine ca. 1400 x 1900 x 1900 mm The GERD WOLFF KMS 280 V is a precision band saw with servo drive that has been specially developed for consistently precise cutting of round material from 10- 135 mm diameter. Capacity for round material (mm) diameter 10 mm 276 pieces are possible diameter 20 mm 78 pieces are possible diameter 30 mm 36 pieces are possible diameter 40mm 21 pieces are possible diameter 50mm 15 pieces are possible diameter 60mm 6 pieces are possible diameter 70mm 3 pieces are possible diameter 80 mm 3 pieces are possible diameter 90 mm to 135 mm 1 piece is possible Feed length in one piece: 780 mm

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 with separate wire feed case Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires, steel [Ø in mm]: 0.6 - 1.6 Weldable wires, stainless steel [Ø in mm]: 0.8 - 1.2 Weldable wires, aluminium [Ø in mm]: 1 - 1.6 Weldable wires, CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Continuous MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Nedpfsy Ia Hmsx Aflocw Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Mains: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Line protection 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulating material class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling type: Gas-cooled, water-cooled Cooling Nominal cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Dimensions wire feeder case (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: good (used), Year of construction: 2003, Manufacturer: KASTO | Model: Funktional A | Serial Number: 6420 102 076 | Year of Manufacture: 2003 | Motor Power: 2.5 kW | Automatic metal band saw | Electric main drive | Hydraulic clamping and feed system | Integrated material feed with roller conveyor | Roller conveyors on both sides | Hydraulic material vise | Saw band guide with coolant supply | Control panel with controls and emergency stop | Suitable for bar and profile material | Dimensions: approx. 1700 mm x 1550 mm x 3600 mm (W x H x L) | approx. 890 kg | The stated dimensions are approximate. All other information without guarantee.| Grey | Steel Ncjdjyicg Iepfx Aflew

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 150 mm spindle taper MT 4 table-size 500 x 400 mm spindle turning speed range 75 - 3.010 U/min feed range - boring 0,1 / 0,15 / 0,22 / 0,33 mm/U Nedpfx Afjwlvlajlscw quill stroke 150 mm voltage 400 V total power requirement 1,8 kW weight of the machine ca. 275 kg dimensions of the machine ca. 0,70 x 1,00 x 1,95 m - Serial-No.: 138050673 - Electromagnetic feed - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: new, Year of construction: 2024, functionality: fully functional, Machine type: Automatic Mitre Band Saw Band dimensions: 3510 x 27 x 0.9 mm Cutting capacity (square): 250 x 300 mm Cutting capacity (round): 250 mm Bundle cutting: 150 - 250 x 100 - 130 mm Cutting speed: 20 - 80 m/min Main drive motor power: 2.2 kW Hydraulic pump motor power: 0.75 kW Nedpfx Ajxk Ti Reflocw Coolant pump motor power: 0.125 kW Table height: 750 mm Weight: 1430 kg Dimensions (W x D x H): 2210 x 2290 x 1890 mm

Condition: used, Year of construction: 2008, bore capacity in steel (diameter) 32 mm throat 232 mm bore stroke 150 mm Spindle Speed 115 - 2470 U/min. tool adaptor MK 3 Ncsdjyv N Dqspfx Aflsw weight of the machine ca. 280 kg dimensions of the machine ca. 500 x 950 x 1800 mm

Condition: ready for operation (used), Year of construction: 1998, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: flat 230 x 200 mm capacity 60 degrees: round 175 mm capacity 60 degrees: flat 170 x 100 mm cutting speed 18 - 110 m/min vice max. 350 mm dimensions of saw-band 3370 x 27 x 0.9 mm engine output 1.5 / 1.8 kW weight of the machine ca. 880 kg range L-W-H 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls Nsdpoyy A Hysfx Aflscw - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame * with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF)

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm Nodpfxsyli Sfo Aflocw throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm weight of the machine ca.: 500 kg dimension machine xH: 0,73 x 0,56 x 0,22 m

Condition: new, 2-column automatic bandsaw Manufacturer: METALLKRAFT Model: HMBS 340 CNC CALIBER Item no. 3693090 Cutting range, round: 340 mm Saw blade dimensions: 4,600 x 34 x 1.1 mm Ncedjyzqwpspfx Aflsw Standard equipment includes: - Band tension monitoring - Hydraulic saw feed - Feed monitoring - Powered chip removal brush - Swivelling control panel - Chip conveyor - Chip container - LED machine light - Coolant system - Operating manual

Condition: used, current intensivity 1,2 / 0,5 A wire dia. 0,8 - 1,6 mm IP protection class IP 43 dimensions 250x210x190 mm speed 1 - 25 m/min weight ca.7,2 kg High-precision wire feeder for automated MIG/MAG robotic applications, optimized for use with the i-Series digital power sources 4-roller drive for constant wire feed Nsdpjzhxmcsfx Aflecw Mains voltage tolerance: +/-10% Current consumption: 1.2 A / 0.5 A Fuse: 3.15 A slow-blow Type A residual current device Wire speed: 1–25 m/min Rotary drive: 4-roller drive Wire diameter: 0.8–1.6 mm Quick and secure connection of hose assemblies using the Dronius System Connector FSC Only 2 left in stock! PLEASE NOTE: Only the wire feeder is sold here—not a welding machine! Translated with (free version)