Mounting cube

Guss 1000/600/H400 mm

Condition: refurbished (used), RA250D oxygen version, oil-free, assembled and filled with Fomblin. Completely overhauled, 0.5 mbar, 250 m³/h, available from stock. Nwodpfsd R Trnox Ad Isk We currently have several oxygen vacuum pumps in stock.

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Nwsdpoid Szvefx Ad Iek Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390.

Condition: excellent (used), Welding positioner, Focker Strähler, 8 tons 8000 kg load capacity with hand and foot remote control Speed and inclination continuously adjustable 0.02 rpm to 1.1 rpm Diameter 1500 mm Height to center when tilted 1170 mm Height in horizontal position 1400 mm Length 2400 mm Width 1500 mm Nwodpfx Aof Ezdned Ijk Condition: visually and technically flawless, runs very quietly.

Condition: used, SURFACE GRINDER MAGNETIC Nwjdpfxe Dv Nue Ad Iok Down table size: 1100x400mm

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Nedporntirefx Ad Iowk Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: used, Description Turning diameter over bed: 350 mm Turning diameter over support: 200 mm Nwjdpfsvkxiyjx Ad Ijk Turning length: 500 mm Speed range: 34-1500 rpm Space requirement approx.: 1600 x 1000 x 1400 mm Total power requirement: 2.2 kW Machine weight approx.: 1 t SYSTEM for thread cutting needs to be overhauled, not active. 1 used COLCHESTER STUDEN center & spindle lathe

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 873 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,450 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, empty load weight: 7,850 kg, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Mast type: Duplex Technical condition: good Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Sideshift, 3rd valve, 4th valve, front working lights, heater, full cab, CE certificate, safety light, Njdpfxjvgh U Ro Ad Ijwk

Condition: like new (used), Year of construction: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Nwsdpetdfbmjfx Ad Iek Table load 450 kg Spindle speed range 6,500 rpm Spindle taper SK 40 Tool changer 24 positions Control system Siemens 840 D Total power 20 kW Machine weight 5,500 kg Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition: very good

Condition: refurbished (used), Refurbished. 1 year guarantee. Rotary vane pump. Njdsrta H Topfx Ad Iewk

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kunzmann WF 610 MC tool milling machine with Heidenhain TNC 620 control – in SUPER condition, CE compliant! Nwsdpfxjzl D S Se Ad Isk Technical data: >> Year of manufacture 12/2017, machine no. 610759 >> Fixed angular table >> Speed up to 5000 rpm >> Feed rate, continuously adjustable in 3 axes, from 0 to 2000 mm/min >> Travel ranges X/Y/Z: 610/400/450 mm >> Table surface: 800 x 425 mm >> Table load: 300 kg >> Vertical quill stroke: 70 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 2000 kg >> Space requirement approx.: 1.8 x 1.9 x 2.3 m >> Power: 23 kVA Accessories and equipment: >> Heidenhain TNC 620 control >> Hydraulic clamping, vertical and horizontal >> PC additional keyboard for TNC 620 >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control and programming examples >> Handwheels >> Electronic handwheel HR510 FS >> Coolant system >> Cabin >> Machine feet About the machine: Offered is a Kunzmann WF600 MC tool milling machine with a Heidenhain TNC 620 control. This universal milling machine is in very good condition. It features a very user-friendly control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal configuration is very easy, thanks to the fold-away vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.