Four Guyon used electric ovens with 9 outlets

Guyon 1824628

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN Njdpsp Audqsfx Aiyoda SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Nodpegyy I Ajfx Aiyoda Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Ndedotqf Rzspfx Aiysa Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Ndodpfx Aev T Un Doiysa Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Machine documentation is available.

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min Ndjdpfju Idbyjx Aiysa rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT. Ndjdsw Rpd Sspfx Aiyja

Condition: used, Year of construction: 2013, x-travel 400 mm Ndjdpfey Nd U Rsx Aiyja y-travel 400 mm z-travel 375 mm weight of the machine ca. 7150 kg

Year of construction: 2020, operating hours: 6,056 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D General Data Measurements width 3150 Measurements depth 5564 mm Measurements height 2135 mm Machine weight 10000 kg Main Drive Spindle speed range 3600 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 22.5 m/min Z-Axis Rapid Traverse 33 m/min Workpiece Workpiece drm over bed 800 mm Workpiece drm 600 mm Ndjdox D Iv Ejpfx Aiysa Tools Slots in storage 12 This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Power : 400V/150A/60000W Ndsdpfx Aijt Akgwsyoa Year of construction : 2000

Condition: good (used), Year of construction: 2000,  Printing technologies installed: • 3 x Flexographic printing units • 3 x Screen printing units • Gravure capability (cylinder formats available) Maximum mechanical speed: 150 m/min Maximum web width: 417 mm Minimum web width: 166 mm Maximum print width: 407 mm Substrate thickness range: approx. 0.008 – 0.18 mm  Repeat ranges Flexo: 228.6 mm (Z72) up to 609.6 mm (Z192) Screen: 269.875 mm (Z85) up to 533.4 mm (Z168) Gravure: 304.8 mm (Z96) up to 609.6 mm (Z192)  Die Cutting Section Flat die cutting: Die cutting width: 407 mm - Repeat: 254 mm (Z80) up to 609.6 mm (Z192) Rotary die cutting capability installed. Unwind / Rewind Section Ndjdpfx Asylypuoiyja Unwinder: • Martin nonstop unwinder • Core diameters: 76 / 152 mm • Maximum unwind diameter: 1000 mm • Maximum roll weight: approx. 485 kg Rewinder system installed. Electrical Data Nominal current: 500 A Connected load: 275 kW General Condition The machine is designed for web label production and represents a robust hybrid combination press with flexo and screen printing capability. The press is available for inspection by appointment.