Press Brake

Hämmerle AP 200x2600

Condition: ready for operation (used), total length: 900 mm, total width: 400 mm, total height: 1,100 mm, empty load weight: 140 kg, gasleiding: Ø50 x 3,91 mm Fedpexllirefx Adaepd stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 2,5 rpm video klik hier Motor power: 1,5 kWt

Condition: good (used), functionality: fully functional, Year of construction: 1995, working width: 4,100 mm, throat depth: 250 mm, overall weight: 20,000 kg, pressing force: 200 t, Hämmerle BM200-4100. The machine was dismantled at the old plant in 2023, but it was not reassembled or put into operation at the new site. Since then, the machine has been kept in storage. All accessories and documentation are included. The machine can be inspected at any time and is immediately available for loading. All data can be found in the pictures... Fsdpfswa S Dnsx Adaopd No tools are included, as these were compatible with the new machine.

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Fpodpjwn Hfijfx Adasd Weight: 18,900 kg + Tools

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Fodpfxelzizmo Adaopd

Year of construction: 2001, condition: good (used), Quality used Edwards Pearson pr6 cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm Fpsdpjh An Uaefx Adaod New / Year 2001 Hydraulic R upper clamping T5 Table 4 axis back gauge – z1, z2, x and r axis – 6axis in total Cybelec DNC1200 Machine in good working condition including a full length set of upper & lower Pressbrake tooling. Serviced by Bystronic uk Edwards Beyeler tooling P5R – R1 – 1030 full length top and bottom The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: used, Year of construction: 2007, Technical details: pressure: 225 t chamfer lenght: 4100 mm height of stroke: 400 mm throat: 250 mm Fpsdpfxex A S Rds Adaod dayligth: 917 mm total power requirement: 30 kW dimensions of the machine ca.: 5500 x 2270 x 3310 mm weight of the machine ca.: 22 t

Condition: used, Year of construction: 1989, Technical details: pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2300 mm throat: 300 mm control for program: CNC-Steuerung DNC7000 dayligth: 830 mm max. stroke: 265 mm ajustment speed: 80 - 100 mm/sec back gauge: motorisch table-size: 2700 x 113 mm work height max.: 900 mm connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: 11,3 t machine dimensions LxWxH: ca. 3,2 x 3,8 x 3,0 m 3-point BENDING - mould bending -Hydrocushion (for regular force adjustment over the entire working length) -Backstop: width 2200mm, 2x supports travel 1800mm and 4x stop travel W:2550xL:860mm -Control panel on the boom can be swivelled and/or control stand with two-hand and foot control Fpsdpsu Icdmjfx Adaed various press brake tools available i.D. *

Condition: used, functionality: unexamined, Year of construction: 1999, machine/vehicle number: 26579, control type: PLC-controlled, bending force (max.): 110 t, working width: 3,050 mm, pressing force: 110 t, working length: 3,050 mm, Used press brake 110 tons 3 meters 6 axes Technical specifications Voltage: 400 V Model: PPEB 110/30 Pressing force: 1100 kN Working length: 3050 mm Distance between uprights: 2600 mm Stroke: 200 mm Table/ram gap: 400 mm Throat depth: 400 mm Approach speed: 130 mm/s Working speed: 12.4 mm/s Return speed: 115 mm/s Fpedpfsw Afccox Adasd Motor: 15 kW Oil capacity: 250 liters Machine weight: 9500 kg CNC control: CADMAN Table width: 150 mm Noise level: 80 dBA Pump flow rate: 38 l/min Pump type: Voith IPV 4-25 High precision and flexibility. The PPEB press brake is a robust, highly technological machine. PPEB gives you the freedom to configure your press brake according to your production requirements. Automatic crowning The crowning system compensates for machine deflection to ensure accurate and repeatable bends. Our wedge system is custom-made for every machine, representing crowning across the entire table length. Robust structure A single-piece welded frame ensures machine accuracy.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: CNC control, controller manufacturer: Cybelec, working width: 3,100 mm, number of axes: 6, type of crowning: CNC-controlled, pressing force: 150 t, Equipment: CE marking, emergency stop, lower tooling, safety light barrier, upper tooling, For sale: 1 used High quality / very good condition Edwards Pearson PR6 3metre x 150ton cnc pressbrake Edwards Pearson PR 150×3100 Make: Edwards Pearson Model: PR 150 Pressure Reference Year / new: 2002 Total axis: 6 – 4axis back gauge Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 150ton Cnc control: Cybelec General Information: Model: PR 150 x 3100 Fpjdpfxjwt Aags Adasd Manufactured: 2002 Specification: Working length mm 3100 press force kN 1500 Return speed mm/s 150 Weight kg 10800

Year of construction: 2001, condition: excellent (used), Quality used Edwards Pearson pr6 cnc pressbrake for sale Fodpfxopcf R He Adaopd Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2001 Hydraulic upper clamping 4 axis back gauge – z1, z2, x and r axis – 6axis in total NEW amplifiers fitted Cybelec DNC1200 Machine in good working condition including some upper & lower Pressbrake tooling. Serviced by Bystronic uk We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.