4
Catalog No. : 5476
Type: MA 4134
Producer: STANKO
Made in: 1980
Characteristic:
Maximum number of strokes per minute: 150 1/min
Power demand: 22 kW
Ram weight: 250 kg
Bv3fenmzsk
Machine height: 2500 mm
Machine length: 2670 mm
Machine width: 1290 mm
Machine weight: 7900 kg
15
Manufacturer: Jam
Sbp 305 S
Exact technical data can be found in the pictures!
The device shows a low battery at startup.
Yuqldxhz
Quantity: 2 pieces
Price/piece
6
pressure: 250 t
stroke: ca. 400 mm
pass through width: 640 mm
table above floor: 900 mm
ram stroke speed: regulierbar/adjustable
passage between the side columns: 470 mm
table clamping surface LxW: 570x550 mm
clamping area of ram: 570x550 mm
total power requirement: 56 kW
weight of the machine ca.: ca. 9,0 t
dimension machine xH: 2,5x1,8x3,8 m
transport dimensions LxWxH: 2,6x1,8x3,1 m
S8vzmsvf3
- control manual and via automatic via SPS Allen Bradley
- one hand and two hand control
- ram guidanc...
3
pressure 1 t
throat 80 mm
Gdd7umtpe
stroke 50 mm
total power requirement 0,04 kW
weight of the machine ca. 0,02 t
dimensions of the machine ca. 0,7 x 0,6 x 0,3 m
5
pressure:10 t
table::350 x 350 mm
stroke:10 mm
Description:
Rotary embossing machine,
for labeling or identification of parts like flanges or tubes as for flange descriptions for example ( pressure, material, nominal diameter.. )
Bhm3ztnhyd
The machine is new and unused
Made in Germany
incl. charsets and symbol set
under power
Original price in 2007 : ? 33.500,--
force 2000 kN (200 t)
Installation height 2200 mm
Stroke 1300 mm
Table size 2500 mm x 1800 mm
Slidingand tilting table
2ue32a
Max. tool weight lower part 80 kN
Max. tool weight upper part 80 kN
Control Siemens
Machine weight 50 tons.
5
Maximum force (pressing): 1400 t
Pressing height: 1150 mm
Machine height: 3500 mm
Equipment:
Heating plates (LxW): 2800x2500 mm
The line consists of a single-deck press.
V3vlpb
The press includes heating plates with dimensions of 2800x2500 mm.
The heating plates are heated with steam to a temperature of 150 ° C across its entire width.
The press can be operated even without the heating plates in the classic pressing mode.
the pressing line can work in two modes:
1) pressing line for pr...
5
max. workpiece diameter 400 mm
0
workpiece height max. 150 mm
total power requirement 10 kW
weight of the machine ca. 4 t
Rcjaucois
dimensions of the machine ca. m
Automatic quenching press, modern m/c.
6
pressure: 30 t
table length: 1730 mm
table width: 1000 mm
passage between the columns longitudinal/sideways: 1850/750 mm
Bwunjeh
clamping surface ram: 1700x1450 mm
dayligth: 1250 mm
total power requirement: 119 kVA
weight of the machine ca.: 15 t
dimension machine xH: 5,0x3,4x4,8 m
- on the table are 3 overlays (1200x200x80mm)
- with the light curtain make SICK type AGSS 450-1111
- with hydr. pressure storage plant make MEINBURK GmbH, power requirement=18,5 kW
- electro-mechanic travel DRO
6
CONTROLS
.. PLC
Technical data:
Cylinder A (Upper Piston) down: 120 kN; 200 mm; 300 mm/sec
Cylinder B (Lower Piston) down: 70 kN; 100 mm; 100 mm/sec
Cylinder B (Lower Piston) up: 120 kN; 100 mm; 100 mm/sec
Filling shoe: 10 kN; 320 mm; 500 mm/sec
Filling height max. 90 mm
Repeat Accuracy A + B-Zyl. +/- 0.01 mm
Repeat Accuracy Filling Shoe +/- 0.1 mm
Vol. Powder Tank 5 liter
System Pressure 265 bar
Bgntrebxan
4
Maximum pressing force 1000 kN
Clamping force 5-500 kN
Working piston stroke 2x250 mm
Clamping piston stroke 100 mm
Working piston speed 20 mm / s
Clamping piston speed 40 mm / s
Bd9yuu8i
Drive motor power 45 kW
1
Type: 470 VS 2000-675
Design: injection molding machine
Manufacturer: ARBURG
Year of production: 1994
Max. board size: 715 x 715 mm
Max. size between posts: 470 x 470 mm
Screw diameter: 45/50/55/60 mm
Screw filling: 225 mm
Maximum filling volume: 318 cm³
Injection pressure: 1900 bar
Clamping force: 2400 kN
Opening force: 65 kN
Opening stroke: 650 mm
Minimum tool height: 150 mm
Maximum tool height: 420 mm
Total installed electrical power: 57 kW. (heating unit output approx. 12.6 kW, pump output 2...
15
Equipment No.: 10012651 | Internal No.: KP 2 | Standard Specs as per available Documentation: Balls per Minute: 300; Maximum Diameter Ball: 20mm; Maximum Blank Length: 32mm; Floor Space Width: 2.43m; Floor Space Length: 5.59m; Motor (kW): 55; Net Weight: 27.000kg
Car3987cm9
AIDA Bruderer BSTA 25H (11025-1237_1991. 8) High speed press
J7jztiy
3
Code: ST3521
Ward Forsyth Hydraulic Press
Bcx89y2be
Table Area: 500 x 450
Throat: 350mm
Daylight: 450mm
6
pressure: 160 t
Brl7mhbgon
distance between columns: mm
stroke: mm
table surface area: 1.260 x 600 (vertical) mm
table plate diameter: 1260 x 600 x 70 (vertical) mm
ram surface area: 700 x 360 mm
throat: 300 mm
total power requirement: kW
weight of the machine approx.: 9000 kg
dimensions L x W x H: 3,7 x 1,5 x 2,2 m
distance base - ram: 1.000mm
mounted ram construction: L:660 x W:300 x H:370mm
rollers 1x on the right and 1x on the left with vertical adjustment 250mm. (Ø 80x300mm)
7
The machine is in good technical condition, by prior arrangement the possibility of test drive.
Cavexuwofc
1
Manufacturer: ENGEL
Year of production: 1991
Model: ES 330/65
Machine type: injection molding machine
Control unit: ENGEL
Max. board size: 570 x 552 mm
Max. size between posts: 405 x 345 mm
Screw diameter: 35 mm
Screw filling length: 1600 mm
Maximum filling volume: 154 cm³
Injection pressure: 1600 bar
Clamping force: 650 kN
Opening force: 25.4 kN
Opening stroke: 310 mm
Minimum tool height: 150 mm
Maximum tool height: 430 mm
Oil filling: 185 liters
The total installed electrical power should be 3...
15
Equipment No.: 12131284 | Internal No.: KP 24 | Standard Specs as per available Documentation: Balls per Minute: 450; Maximum Diameter Ball: 14mm; Maximum Blank Length: 22mm; Floor Space Width: 1.66m; Floor Space Length: 3.75m; Motor (kW): 37; Net Weight: 10.500kg
Car37jcpyw
3
press capacity 148 to
material Hartmetallstangen
C2baqe8o
quality Extrusionspressvorgang 0
3
Code: ST3520
Ward Forsyth Hydraulic Press
Table Area: 500 x 450
Throat: 350mm
Daylight: 450mm
Dvkxlfb
8
For technical data, see pictures....
Vvmld3
5
The machine is in good technical condition, by prior arrangement the possibility of test drive. It is a complete line of presses including accessories. It was retrofitted in 2005. Speed 20-60 shots/min Feed stroke 8-120mm Feed adjustment 125 mm Power 45 kW Weight 30 tons Slide size 1000 * 800 mm Table size 1250 * 900 mm Scrap hole size 710 * 250 mm Table height above floor 900 mm Motor power 380V Control power supply 24V Weight: 30000 kg Unwinder: (PBK Automation 3000 / 500SC GLST) max. outer di...
3
In good technical condition.
Year of production 1999.
Cac3quxyuy
approx. 96.000Mh.
Clamping force 350 kN.
Maximum opening 200 mm.
Min. mold height 150 mm.
Max. mold height 300 mm.
Injection volume 70 cm³.
Injection weight 59 g.
13
Equipment No.: 10013027 | Internal No.: KP 4 | Standard Specs as per available Documentation: Balls per Minute: 525; Maximum Diameter Ball: 11mm; Maximum Blank Length: 22mm; Floor Space Width: 1.66m; Floor Space Length: 3.75m; Motor (kW): 37; Net Weight: 10.500kg
Car33mo83t
5
press capacity 50 to
material Hartmetallstangen
quality Extrusionspressvorgang 0
0edfp0sp
4
Type: 74.30
MultiBend control
Pxuhd
Tools are quickcha
8
feed pressure x bar
liter capacity x l
power capacity x kW
pressure t
throat max. mm
stroke max. mm
pressure t
distance between columns mm
stroke mm
Capw8rbzn8
0 V
0 Hz
0 kW
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
14
Ref. -No.: 10131
Brand: LOOSER
Year of construction: 1990
Type of control: Koventionell
Control: N/A
Storage location: Mülheim an der Ruhr
Be2ztll
Country of origin: Deutschland
11
Secura Presse
7wpiuiti
Further informations will be added.
14
Equipment No.: 10012981 | Internal No.: KP 11 | Standard Specs as per available Documentation: Balls per Minute: 710; Maximum Diameter Ball: 8mm; Maximum Blank Length: 13mm; Floor Space Width: 1.08m; Floor Space Length: 2.52m; Motor (kW): 11; Net Weight: 3.740kg
3ugh3dmh
8
Ezenter press miller 60 tons.
If you have any questions, please contact us.
Gystnk
4
Hot riveting installation consists out of:
B92tszhrlf
- 1 =
1
1 x 1,800 ton machine
1 x 1,300 ton machine
Calbj3u2h0
4 x 600 ton machines
Can be seen running Sweden
3
Press brake
Brand COLLY
Cai2iozsiz
Model PS.G63.25
Capacity 2500 x 63T
Stroke 150mm
Motor 5.5 kw
2
max. workpiece diameter 500 mm
weight of the machine ca. t
dimensions of the machine ca. m
Knlzpdut
Maschine No.458
7
Equipment No.: 10014948 | Internal No.: KP 17 | Standard Specs as per available Documentation: Balls per Minute: 920; Maximum Diameter Ball: 5mm; Maximum Blank Length: 8.5mm; Floor Space Width: 1.01m; Floor Space Length: 2.27m; Motor (kW): 5,5; Net Weight: 2.000kg
Car3xazzub
6
pressure 50 t
width max. 1.200 mm
height max. 800 mm
table: demontierbar
Exhjyuvwa
weight of the machine ca. 2,5 t
4
Pacific horizontal press 400 ton
I0lyecxs8
5
For rolling the Schüco AWS and Schüco ADS system profile as well as special profiles and V8 components together with the insulating bars and for rolling down the angles on various profiles from the Schüco facade and skylight constructions.
Sv972w
6
Press brake Brand: LVD
Type PPEB 80/20
Capacity 2000 x 80T
Distance between uprights 1550 mm
CNC
Vertical stroke 200 mm
Working speed 10 mm/s
Cai2cgq3ee
Number of axes Y1 Y2 X1 R1
Motor power 12 kW
Dimensions (L x W x H) 2450 × 1900 × 2200
Weight 5000 kg
3
Throat depth: 280mm, max. pressing force: 800kN, stroke speed: 110/min, ram adjustment: 60mm, stroke adjustment: 10-100mm, weight: 4.9t.
W2r3s7g
Press brake cutting machine PROMECAM RG35
Throat depth: 200 mm
Maxi cutting width: 2000 mm
Feeding table: L 3500 mm x W 2200 mm
Back cutting system for bring materials (fabric, syntethic material...)
This machine was used to cut different lengths of rubberized fabrics
Total length with feeding table: 5100 mm
Qbhcp7ac
Width: 2400 mm
Total height: 2000 mm
Weight: Machine: 4,5 T - Table: 1 T
12
Make:Hegenscheidt MFD
Type:PR 250 / 1000
Control:Siemens TOUCH
Year:2010
Rebuild in 2010 with SIEMENS TOUCH
Rebuild cost EUR 200.000
Distance measuring device with double taster
Big package with pressing tools in several diameters
Specifications
Metric US Standard
Centre height
550 mm
Max. wheel tread Ø
1100 mm
B9pw3ggwvx
Max. wheelset length
2500 mm
Max. pressing force
250 T
Max. cylinder stroke
500 mm
Cylinder Ø
300
Working speed
10 - 80 mm/min.
Pinole feed
1300 mm/min.
Return speed
1300 mm/...
