Machining center

HAAS VF-6B/ 40HE

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 40671, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 762 mm, table width: 711 mm, table length: 1,626 mm, table load: 1,814 kg, spindle speed (min.): 7,500 rpm, spindle motor power: 15 W, number of slots in tool magazine: 25, "HAAS" VF 6 machining centre Nkjdewutz Rjpfx Adwjt

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 800 kN Stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Nksdpfx Ajwq Dpqsdwst Control: Delem DA-65R The machine starts, but the control does not respond to commands. The previous user replaced the original AMADA control with a DELEM unit.

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 193 34-41, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, table load: 2,500 kg, spindle diameter: 102 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 1,600 rpm, total height: 3,500 mm, total length: 6,500 mm, total width: 4,700 mm, table length: 1,400 mm, table width: 1,250 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, The machine was overhauled and modernized in 2025 and is immediately ready for operation! Travel paths: - Table cross travel (X-axis): 1600 mm - Spindle head vertical travel (Y-axis): 1250 mm - Table longitudinal travel (Z-axis): 1475 mm (restriction due to large table) - Quill travel (W-axis): 710 mm - Table rotation (B-axis): 360 degrees Clamping table: - Clamping surface: 1250 x 1400 mm - Table load capacity: 2.5 t Spindle: - Diameter: 102 mm - Tool holder: DIN2080, SK 50 - Infinitely variable speed: 4 – 1600 rpm - Drive power: 13 kW Feed: - X, Y, Z axes, stepless: 1 – 4000 mm/min Rapid traverse: - X, Y, Z axes: 4 m/min Power consumption: 42 kW Nksdpfx Aow Rn R Rsdwet Weight: 10 t Space requirements (L x W x H): 6.5 x 4.7 x 3.5 m Equipment: - Heidenhain TNC 320 - Coolant device

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in Nksdpfxoul Efmo Adwot plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. Nedpfx Adetltl Hswokt TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Condition: ready for operation (used), controller model: Haas, empty load weight: 12,000 kg, total length: 5,950 mm, total width: 3,048 mm, total height: 2,200 mm, swing diameter over cross slide: 2,000 mm, Grote doorlaat toolroom draaibank Draaibank met dubbele klauwplaat Spanenafvoerband CNC Hollow Spindle Slant Bed Oil Country Lathe Swing over bed: 1350 mm Swing over cross-slide: 400 mm Nedpewu Ipisfx Adwskt Dia of spindle bore: 270 mm!! Power on the spindle: 55 HP Number of speeds: 1 > 500 rpm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Nkedpfeur Hfzjx Adwst Fanuc 310is controller

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: Nkedpfsvr Eh Ejx Adwet • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 810 mm, CNC HEIDENHAIN iTNC 530 Nodoq Rcu Ejpfx Adwekt X/Y/Z 2,400/1,500/810 mm retrofitted 4th axis 12,000 min-1, 40 kVA, , traverse paths weight 7.800 kg Table with vacuum plate with BORNEMANN 960 suction unit

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 260 mm Center distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Nkodpfxeh Rvxhj Adwet Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates