Hagen und Goebel threading machine

Hagen und Goebel HG 12E

Condition: new, table diameter 315 mm 50 Kg 25 Kg chucking diameter 200 mm turning speeds 0 - 5 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 45 Kg dimensions of the machine ca. 800 x 600 x 600 m welding turntable with - With integrated tripod and universal welding torch holder Isdpoi Hg I Dofx Ab Isa - Quick chuck 200mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 short taper size 8 taper diameter 139,735 bolt circle diameter 171,4 mm diameter 315 mm Iodpfx Absg Rxh Ie Ija Jaws individually adjustable

Condition: new, Year of construction: 2024, Miter saw with a saw blade diameter of 600mm (optional 800mm) - manual miter adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders infinitely adjustable) - Two-handed safety control Optionally available: - Automatic miter adjustment - Roller conveyor with length stop or positioning system - Design as a sawing machine - Preload magazine - Horizontal clamping device - Suction system - Other accessories on request Isdpfjd Rhziox Ab Ija We will be happy to make you an offer tailored to your requirements. The machine can be inspected and tested in 56812.

Condition: used, Year of construction: 1970, x-travel:900 mm y-travel:250 mm Iedpfx Abecxxqrs Isa z-travel:370 mm table surface area:1525 x 325 mm total power requirement:9,85 kW weight of the machine ca.:3.1 t dimensions of the machine ca.:2,0 x 2,5 x 1,7 m

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. Iodpfx Abewbvhas Iea The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: new, Article: Welding rotary table 50 kg TYPE: KT-50 without jaw chuck Max. Load: 50Kg horizontal Max. Load: 25Kg vertical Rotation speed: 1-7,5 rpm Rotation direction: left and right Face plate speed: manually adjustable Face plate diameter: 315mm height of faceplate: 375mm inclination angle of face plate: 0-90 Motor power in operation: 0,08kw Motor power standby (Kw): NA dimensions: 430 x 430 x 375mm Weight: approx. 38kg Isdpfxsbambro Ab Iea Power: AC 110V / 220V 50/60Hz Price is without chuck and height adjustable workbench Surcharge quick chuck 195.-€ Packing and shipping Germany approx. 80.-€

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm Iedpfxe Syv Tj Ab Iea cutting length: 5 - 70 mm output: 400/min. complete with ciller and motorized decoiler

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 1040, Offer 23342 Hydr. welding turntable and tilting table - three axes - welding manipulator Ijdpfjraiu Dox Ab Ioa Technical data: - max. load capacity 750 kg - Flat plate diameter 700 mm - min. Table height in horizontal position approx. 720 mm - Average table height in horizontal position approx. 920 mm - Max. table height in horizontal position approx. 1060 mm - Working height manually adjustable in 3 steps - Faceplate mot.rotatable + swivel or tiltable - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for direction of rotation, swivel or tilt - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Iedpfx Asgbfaxeb Ija Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: used, 5tSWF Krantechnik GmbH Ijdpfxodc A R To Ab Ija