Warehouse

Hallenbau in Systembauweise Hallenbau

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 800 L Max. batch weight: 2000 kg Max. component weight: 150 kg Compartment diameter: 1350 mm Compartment width: 1350 mm Nr. Of turbines: 2 Power of turbine: 11 kW Max. turbine flow: kg/min Cleaner type: air Foundation: no Housing protection: Mn Req. air flow: yes Fgodslf Hq Nepfx Aalsk Total width of machine: mm Total height of machine: mm Total length of machine: mm

Condition: used, mileage: 5,75,445 km, power: 62 kW (84.30 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,000 mm, overall weight: 2,800 kg, empty load weight: 1,813 kg, maximum load weight: 987 kg, first registration: 12/2010, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, CO₂ emissions: 190 g/km, emission class: euro5, color: yellow, driver cabin: other, suspension: other, number of seats: 3, Year of construction: 2010, total length: 5,292 mm, construction height: 1,970 mm, fuel: diesel, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter, built in 2010, is a used panel van with a mileage of 575,445 km. It has a 2.0 TDI diesel engine with an output of 62 kW (84 hp) and a displacement of 1,968 cc. The emissions class corresponds to Euro 5 and the CO2 emissions are 190 g/km. The van has a Fsdstfa Rlopfx Aalegk 5-speed manual transmission and offers space for three people. In terms of equipment, the T5 Transporter is functionally equipped. It is equipped with sliding doors on both sides, which allow flexible access. The wing doors in the rear area make loading easier. The vehicle also has Parktronic, which makes parking and reversing easier. The interior is equipped with a robust wooden panel in the loading area, ideal for demanding transport tasks. With dimensions of 5,292 mm long, 1,904 mm wide and 1,970 mm high, the vehicle offers a good balance of usable space and maneuverability. The approved total weight is 2,800 kg. Combined consumption is 7.2 l/100 km, which is efficient for a vehicle of this size. The used van is available in broom yellow (R1032) and has a truck registration. It offers a practical solution for commercial users who value reliability and functionality. Sold only to commercial users (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: excellent (used), Year of construction: 2004, Gofa semi-trailer cryogenic for nitrogen, argon, oxygen, LIN, LOX, LAR. Year: 2004 Working pressure: 3 bar Volume: 12000 L Fsdpfjrk Na Aox Aaljgk We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide. We will be glad to answer your questions via phone and e-mail

Condition: like new (used), 1500 m² storage platform Schäfer R3000 3-story used, top condition, as new, see pictures Ground floor storage platform steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas Fedpfx Aohzw Hijalegk broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: used, Year of construction: 2014, ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Content of the facility ►1 piece - Gas-heated large powder furnace ►1 piece - Automatic powder coating booth ►1 Piece - Electrically Heated Small Powder Furnace ►1 piece - Manual monocyclone powder coating booth ►1 piece - room type monocyclone manual powder coating booth ►1 piece - Automatic chemical pre-treatment and drying system ►6 pieces - Automatic powder coating gun ►3 Pcs - Manual Powder Coating Gun ►1 piece - Automatic powder recovery unit ►5 pieces - monocyclone ►1 piece - Automatic control panel ►1 Piece - Automatic Rod Movement System Speed ​​Controlled ►2 Pieces - Movable Platform Speed ​​Controlled ►12 pieces - parking station ►300 m - conveyor rail ►12 pieces - hanging rods Our facility is located at Anhaltstrasse 30, 14943 Luckenwalde. You can make an appointment to view the machines. The system has been in use for 8 years. Since we are the direct manufacturer of the plant, we can make the changes you want to the machines by mutual agreement. It does not fit into your existing assembly space? Then we can make changes to the layout. Fgodpfxjiivq Uj Aalsk Please check the system PDF file using the link below.

Condition: excellent (used), Offered is a used steel hall: steel, hot-dip galvanized, monopitch roof, trapezoidal sheet and doors. Dimensions: 25.55 m (length) x 5.56 m (width). Height at front: 3.43 m, height at rear: 3.13 m. Roof overhang at rear: 1.30 m. Door dimensions: 3.04 m x 2.49 m. Very good condition. The hall is assembled. Sale without dismantling. Fgjdpjxcwtqjfx Aalek

Year of construction: 1978, condition: used, pressure 100 t throat 380 mm stroke 400 mm power capacity 22 kW dayligth 600 mm ram surface 600x500 mm table surface area 720x600 mm weight of the machine ca. 9 t Fjdpfjlp U Dpsx Aalsgk

Condition: new, saw blade diameter: 400 mm, - Saw blade 400 mm Fgjdpju Si Ndjfx Aaljk - Double miter - 4 pneumatic clamps - Mist lubrication system - Blow gun - Protective cap - documentation - 400V

Condition: new, Year of construction: 2025, Machining center with 4 CNC controlled axes for machining profiles made of aluminum, PVC, and steel Machine frame in stable welded construction, stress-relieved annealed, with hardened rail guides Protective cabin over the entire machining length Pneumatically opening safety door Milling spindle: 3.8/4.6 KW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with tool holder ISO 30 with minimum quantity cyclic spraying for tools with fill level monitoring Tool magazine: 5 positions, on the left side of the machine bed, for holding drilling, milling, and thread cutting tools, angle head, disc milling cutter up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: One pneumatic reference stop each on the left and right of the A-axis Fgodpfxewrcwpj Aaljk Travel paths: X - Axis 3500mm Y - Axis 370mm Z - Axis 348mm A - Axis ±90° Travel speeds: X - Axis 70m/min. Y - Axis 30m/min. Z - Axis 30m/min. A - Axis 60°/sec Max. working areas: X - Axis 3270mm Y - Axis 250mm at 0° 116mm at ±90° of the A-axis Z - Axis:170mm at 0° 200mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side machining by swiveling the A axis 90°-0°-90° Face machining using a disc cutter Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screw drives and guides, with fill level monitoring Operation: 18.5" touchscreen Mouse + keyboard Connection data: Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, Delivery without power cable Pneumatic: pressure 6 - 8 bar Dimensions and weight: Length: 5800mm Width: 1640 mm Height: 2000mm Weight: 2000 kg incl.: graphical programming software CM3D/CAD3D barcode reader additional network connection incl. remote maintenance/diagnosis for 1 year

Condition: new, - Capacity 1570 x 9 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) Fedog Ntlcjpfx Aalegk - Digital readout for rear roller movement - Digital readout for bottom roller movement (material clamping) - Hardened rollers - Conical rollers - Swivelling top roller - Central lubrication system - Brake motor - Emergency stop - Documentations - 400V