Haloila Octopus 1800 BFTS Pallet Winder (2006)

Haloila Palettenwickler

Condition: used, Year of construction: 2016, Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Technical data - Manufacturer: Haloila - Model: Octopus Compact, inline version - Year of manufacture: 2016 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Designed output: 32 pallets per hour (reference pallet height 1,200 mm, 14 wraps per pallet, double wrapping) - Pallet formats: 1,000 x 1,200 mm, Euro 800 x 1,200 mm and special 1,200 x 1,200 mm - Load: up to 1,200 x 1,200 mm, height 500 to 1,200 mm, up to 1,000 kg - Conveyor: roller conveyor, height 390 mm, speed 15 m/min, effective width 1,285 mm, roller pitch 166 mm, Movimot geared motors - Film carriage: AC-powered, pre-stretch up to 230 % - Film seaming: heat-seal pad - Power supply: 3 x 400 V, 50 Hz + N + PE - Connected load: 4 kW - Rated current: 10 A - CE mark on the machine plate Equipment - Rotating ring with film carriage and film pre-stretch unit - Roping device - Pallet roller conveyor through the winder, with chain transfer section and pneumatic pallet lifter with sensors - Photoelectric sensors for pallet and load height detection, photocells for load position - Control cabinet and touchscreen operator panel (German), signal tower Hfedsz R Sxdopfx Ahfsn - Signal exchange interface (DP/DP coupler) for connection to a line control - Safety fencing around the wrapping zone, safety light curtains at infeed and outfeed with muting - Restart push-buttons at the infeed Condition Used, very good condition and fully functional. Out of production since July 2024. Sold without warranty. Availability Available immediately. The machine is still installed: dismantling and loading are to be arranged by the buyer. The matching oil filling line from the same site can also be offered on request. Location: Germany.

Condition: good (used), 1200 m² steel platform Used, good condition, see pictures. Column grid approx. 10x6m Load per m² 800 kg Stairs, railings, transfer station, lift and much more available! Negotiable price: € Price on request! Partial sale and CAD planning possible. All plans and structural calculations available. Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by appointment. Further information on request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse platforms & steel platforms immediately available • 30–50 articulated lorries of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you came across us because of heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer! Hsdpfx Ajt Ivwxshfsfn

Condition: used, Year of construction: 2008, Overview This Haloila Octopus 1800 SFTS TWIN is an automatic rotary-ring stretch wrapper for palletised loads, built in 2008. It was built by Oy M. Haloila Ab and delivered under the ITW Mima Packaging Systems brand; the Octopus line is sold today under the Signode name. The machine is still installed, under power and running in production, and can be inspected in operation. The rotating ring carries the film carriages around the stationary pallet, so the load itself is never turned. In the TWIN configuration two film carriages run on the ring, which is what carries the output: up to 100 pallets per hour with standard overlap and 21 wraps. Euro pallets and half pallets are processed. A top sheet unit is installed, functional and in daily use. The machine has no automatic reel change (RCS). Technical data - Manufacturer: Haloila - Model: Octopus 1800 SFTS TWIN - Year of manufacture: 2008 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Operating hours: 50,408 h - Output: up to 100 pallets/h at standard overlap and 21 wraps - Pallet formats: Euro pallets and half pallets - Configuration: TWIN, two film carriages on the rotating ring - Automatic reel change (RCS): no Hsdsz D Aw Ujpfx Ahfjfn - Top sheet unit: yes, functional and in use - Control: Siemens SIMATIC S7-300 PLC - Operator panel: Siemens SIMATIC touch panel - Communication: SIMATIC NET / PROFIBUS - Drives: Emerson / Control Techniques frequency inverters (Commander SK, Unidrive M300) - Power supply: 3 x 400 V - Max. current: 20 A - Connected load: 5.0 kW - Machine weight: approx. 2,650 kg - CE mark on the machine plate Equipment - Rotating ring with two film carriages (TWIN), film clamping and cutting on the ring - Top sheet unit for covering the pallet load before wrapping - Siemens SIMATIC S7-300 control with touch panel operation in a separate switch cabinet - Emerson / Control Techniques inverter drives - Pallet conveyors below the winder, included in the sale - Operating manual, wiring diagrams and further technical documentation Condition Used and fully functional. The machine is in production at the time of listing and has 50,408 operating hours. Maintenance was carried out regularly by the machine manufacturer. Sold without warranty. Availability From 16 October 2026. Location: Germany.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Hedjy Nk Haspfx Ahfefn Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Condition: excellent (used), Year of construction: 2006, Manufacturer Gabler Model M92 L Year 2006 Condition Very Good Stock Number 00006 Max forming area 750 x 436 mm Depth of draw 150 mm Max material width 835 mm Max cycles / min 44 Max mould closing force 350 kN Max top heater output 81.90 kW Max bottom heater output 54.60 kW Operating air pressure 8 bar Hfsdpfx Ahew Rpzqofon Power Supply 230V 50Hz Total Connected Load 138.66 kW Approx Dimensions 7,925 x 5,320 x 3900mm (LxWxH) Approx Weight 10,400 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, High-quality meltblown production line for nonwovens On December 17, 2025, a complete machine inspection was carried out by the manufacturer's customer service department. Report available. Hsdox Hx Rnepfx Ahfsfn If interested, we can offer assistance with commissioning at the customer's site. The video shows the line shortly before dismantling. Operating hours: 200 hours (only for commissioning) Price of a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of construction: 2021 • Last commissioning: 2022 Technical data • Working width: 1600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating power of the rotating beam: 65–172 kW • Winding station: Contact winder with pre-set bobbin change • Maximum winding diameter: 1250 mm • Web width: 1700 mm • Winding tension: 10–100 N/m Additional equipment and accessories • 3-component dosing system • 80 mm seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Slitting knife • Central control panel with touchscreen and data entry

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, New conveyor belt equipped with a metal detector. 110 kW motor with frequency inverter, new. Hfodjwqrrtepfx Ahfen Vacuum system with two zones. Erema double-piston screen changer. Die-face cutting system; water cooling; centrifuge; conveying fan. One barrel and two used spare screws

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), overall weight: 2,200 kg, This advertisement serves solely for informational purposes and does not constitute a legally binding offer. The H180 model is the ideal equipment for agriculture, the construction industry, the electrical, plumbing, repair, and similar sectors. We also guarantee equipment service even after the warranty period has expired. Wheel loaders are manufactured based on and under the supervision of European technicians. The equipment consists of a robust structure and can operate under all conditions. DIMENSIONS AND WEIGHT: Length (without attachments): 3.5 m Length (with standard bucket): 4.25 m Overall width: 1.1 m Overall height: max. 2.4 m / min. 1.7 m Empty weight (without bucket): 2200 kg Wheelbase: 1.86 m Axle distance: 1.55 m Tires: 10.0/75 – 15.3 OPERATING PARAMETERS: Lifting height (lower edge of the standard bucket): 2.8 m Maximum lifting height (top edge of the attachment): 3.2 m Maximum lifting height (top edge of the bucket): 3.5 m Dumping height (45°): 2.4 m Maximum lifting capacity (at the attachment): 800 kg WORKING EQUIPMENT AND HYDRAULIC SYSTEM: Bucket width: 1.05 m Bucket volume: 200 liters Bucket weight: 130 kg Hsdpfxsyk Edze Ahfsfn DRIVE AND TECHNICAL EQUIPMENT: Engine: KUBOTA – DIESEL Engine model: D1105 Engine power: 18.2 kW – 25 hp Battery voltage: 12 V Gears: 1 Drive: hydrostatic Brakes: disc brake Parking brake: drum brake ADDITIONAL EQUIPMENT: Bucket and forks Road lighting Trailer hitch Additional hydraulic circuit Joystick control 4x4 drive Quick coupler PWG pump Italy PRICE: €14,500 net €17,255 gross

Condition: used, color: gold, Year of manufacture: 2019 Year of construction: 2019 Operating hours: 2.450 Empty weight: 1.500 kg Dimensions (LxBxH): 386 x 98 x 232 cm Hjdpfsxk Tdnjx Ahfjfn = Additional options and accessories = - Seat heater

Condition: good (used), Year of construction: 1996, operating hours: 62,590 h, screw conveyor diameter: 50 mm, screw conveyor length: 1,300 mm, Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Hfedoh Nmt Dopfx Ahfsn Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional