High pressure pump unit 490bar 59l/min.

Hammelmann HDP 77

Condition: good (used), Year of construction: 2009, pressure: 330 bar, operating pressure: 330 bar, Hammelmann HDP 77 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Dsdpfxerzuwmo Ap Dewc Pump type: HDP 77 Operating pressure: 330 bar Delivery rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2009 Condition: In good used condition.

Condition: used, Year of construction: 1987, functionality: fully functional, We are offering this used Pallmann PHP 8-12 grinding plant (hammer mill), year of manufacture 1987. The precise diagrams with all individual components are available. Dedpfxjy Iu Rms Ap Dowc

Condition: good (used), Year of construction: 2011, pressure: 330 bar, operating pressure: 330 bar, Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but not Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1,500 rpm Drive power: 37 kW Dedpswyn Sujfx Ap Dswc Equipped with Siemens 1LA6223-4AA60 electric motor, 45 kW With pressure regulating valve, with safety valve, with oil cooling system. Dimensions (LxWxH): approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of manufacture: 2011 Condition: In good used condition. New oil pump.

Year of construction: 2007, condition: like new (used), machine/vehicle number: A7.01077.0336, Hammelmann Electric Driven High Pressure Unit 950 bar 38 ltr/min Djdjdt Uyuspfx Ap Dswc 400V 50Hz complete unit in new condition without controls and motor starter

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 270 mm, spindle bore: 77 mm, turning diameter: 505 mm, turning diameter over bed slide: 505 mm, center height: 250 mm, center width: 1,500 mm, turning length: 1,500 mm, quill stroke: 180 mm, quill diameter: 80 mm, quill travel distance: 180 mm, total length: 3,095 mm, total width: 1,100 mm, total height: 1,525 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 13 rpm, swing diameter over cross slide: 270 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 40 mm, metric thread steps: 29, bed width: 340 mm, Turning diameter in gap: 700 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 13 rpm, swing diameter over bed slide: 505 mm, overall weight: 2,400 kg, rapid traverse X-axis: 1 m/min, rapid traverse Z-axis: 3 m/min, quill mount: MK 5, three-jaw chuck diameter: 250 mm, Trens SN500 Classic — Reconditioned Center Lathe, 2001 We offer this fully reconditioned Trens SN500 Classic center lathe, year of construction 2001, completely overhauled by original factory technicians to near-new condition. Machine details Manufacturer: Trens Model: SN500 Classic Year of construction: 2001 Machine type: manual universal center lathe Control type: manual Max. swing over bed: 505 mm Max. swing over cross slide: 270 mm Max. swing in bed gap: 700 mm Distance between centers: 1500 mm Height of centers: 250 mm Spindle nose: BAJONET DIN (ISO702-III) B8 Spindle bore: 77 mm Dwjdpozndb Ejfx Ap Djc Spindle speed range: 12.5–2000 min⁻¹ (18 gears) Main motor output: 7.5 kW Max. torque: 1450 Nm Standard toolpost: 4-way toolpost, max. tool size 32×25 mm Tailstock sleeve: MORSE 5, diameter 80 mm, travel 180 mm Metric threads: 29 pitches, 0.5–40 mm Whitworth threads: 38 pitches, 1–80 TPI Machine dimensions (H×WxL): 1525mm ×1100 mm x 3095mm Weight: approx. 2400 kg (without accessories) Included accessories: 3-jaw chuck TOS Svitavy IUS 250/3-2-M1, ø 250 mm, B8 mount 4-jaw chuck Bison 4335-315-8, ø 315 mm, B8 mount Steady rest, ø 10–115 mm, with 3 friction contacts (rolling contacts available as paid option) Follow rest, ø 10–115 mm, with 2 friction contacts (rolling contacts available as paid option) Large steady rest I., ø 110–250 mm, with 3 friction contacts (rolling contacts available as paid option) Reconditioning scope All guideways ground and hand-scraped Spindle ground and reconditioned Tailstock quill ground All new bearings, including spindle bearings New gears New paint finish New plates (speed, feed, and thread charts) Machine is in excellent mechanical condition and ready for immediate use. Available for inspection. Geometric protocol available. Electronic machine manual on USB. For questions or further details, feel free to contact us by message or phone.

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Dwjdpfx Apsdtdwas Dsc Magnetic grid 200x200mm High-quality cabinet construction completely closed Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below

Year of construction: 2014, condition: ready for operation (used), An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible. Dwjdpfsx Sywgsx Ap Dsc

Condition: used, power: 2.2 kW (2.99 HP), nominal power: 2.2 kW (2.99 HP), overall weight: 30,000 kg, We offer a wide selection of used geared motors from conveyor systems for sale. Available manufacturers include: SEW NORD Siemens Lenze Demag Technical data: Power: from 0.55 kW to 2.2 kW Stock: over 1,600 units Total weight: approx. 30 tons Dwjdpfx Ajy Tg Sajp Doc Thanks to the large number of units, you are likely to find the right geared motor for your needs. Upon request, we will gladly send you a detailed Excel list with the available models and technical data. Large quantities available immediately Sales preferably as a complete package Price per unit: 100 to 150 € net (depending on the model and condition) If you are interested, we look forward to receiving your inquiry. Please note that unrealistic price offers will not be answered.

Condition: used, functionality: fully functional, power: 130 kW (176.75 HP), empty load weight: 14,000 kg, BHS - DKX 4.0 Single Shaft Mixer in very good condition, suitable for concrete, roller-compacted concrete, cement-bound road base, sludge, etc. Thanks to the bottom discharge flaps, even challenging, cohesive, or coarse materials can be mixed effectively. Motor power: 130 kW, empty weight: 14 tons, output: approx. 400 tons/hour. PLC and new electrical cabinet also available. Price on request. Dwedpfx Apoxxtk Dj Dec Haendle Box Feeder BKS 1506 with steel plate belt conveyor, large extensions (25 cbm), and two separately driven ripping shafts for challenging materials. Suitable for clay, loam, cohesive materials, substrates, humus, waste, etc. Two units available, new control system on request. Price on request.

Condition: refurbished (used), CN Centerless grinding machine ROSSI MONZA 1500 CN Dsdpsmmqirsfx Ap Djwc currently being overhauled and fully electrically/electronically retrofitted Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing Grinding wheel 350 mm * 610 mm dia This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap. Grinding wheel width: 350 Grinding wheel diameter: 600 CNC: Siemens