Center Lathe

HBM 320 x 900 Professional

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm Codpevn Uz Tofx Addehf turning diameter in the gap mm turning speeds 75 - 2000 U/min centre height 160 mm spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 V total power requirement 1,5 kW weight of the machine ca. 0,29 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step Chjdpfx Adjv A Sqhedjf cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: new, WM180V - ROGI vario metal lathe 230V-1Phase Turning diameter above bed ----- 180 mm Turning diameter above cross support ----- 110 mm Center height ----- 90 mm Center distance ----- 300 mm Bed width ----- 100 mm Cross support travel ----- 75 mm Reverse motion of tool support ----- 55 mm Permeate main axis ----- 21 mm Main shaft connection ----- MK3 Speed range spindle ----- variable 50 - 2500 rpm Thread cutting withworth ----- 10 - 44 TPI (8) Thread cutting metric ----- 0.5 - 3 mm (10) Travel pinole ----- 60 mm Diameter pinole ----- 30 mm Pinole fitting ----- MK2 Chedpfx Ajga T Eboddjf Motor power ----- brushless 600 Watt Weight ----- 60 kg STANDARD ACCESSORIES * 3 chuck 100 mm - self-centering * 4-way chisel holder * Drip tray * Back panel * Shielding chuck * Shielding spindle * Chisel support shield * Set of casters * Digital speed readout * Fixed centers * Left / Right switch * Tools in a box OPTIONS * Independent 4-jaw chuck 100 mm * Flange for 4-jaw chuck 100 mm * Fixed glasses * Moving glasses * Fixture plate 170 mm * Support box * TOOA0 quick-change chisel holder * Rotating chisel set

Condition: new, length 2000 mm width 700 mm work height max. 900 mm dimensions of the machine ca. 2,0 x 0,7 x 0,9 m Chjdpfx Adegvqzvodsf weight 160 kg Workbench - Made in Germany Industrial quality, particularly robust and durable design for the highest standards Expectations! Workbench top 45 mm thick made of high-quality multiplex beech 3 drawers on the left Right 1 drawer with 1 large compartment Center open compartment Paintwork: RAL 5010 blue, RAL 6011 green RAL 7016 anthracite

Condition: excellent (used), Precision lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: WEILER, lead screw lathe type commodor 42 -Machine bed: hardened -Turning length: 900 mm -Turning Ø over bed: 400 -Turning Ø over support: 190 mm -Spindle bore: Ø 56 mm -Spindle speeds: 45 - 2000 rpm -Three-jaw chuck: Röhm Ø 200 mm -Four-jaw chuck: Röhm Ø 200 mm Chodpoxapm Refx Addsf -Tailstock mount: MK3 -Drive: 4 kW -Accessories: 18x Multifix tool holder with rotating center see photos -Lathe dimensions: 2200/1300/H1410 mm -Weight of lathe: 1380 kg

Condition: used, functionality: fully functional, spindle bore: 41 mm, turning length: 1,000 mm, Amutio Cazeneuve Lathe Model HB 500, 1000mm e.p. Max diameter on bed 500 mm, max diameter on cross slide 300 mm, shank hole 41 mm, 18 speeds from 25 rpm to 2000 rpm. With Fagor dimension display, with fixed and mobile rests, with protections, connected to 220 V Chedpfxev Rnfqs Addjf

Condition: new, Year of construction: 2025, CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production. NEW, IMPROVED MODEL !!! high-quality and reinforced spindle bearing system new guards system compliant with CE standards the latest model of digital axis reading reinforced and modernized lathe base with drawers for tools and an extendable chip tray Characteristics of the machine REINFORCED, RIBBED SURFACE OF THE LATHE'S BED PROVIDES MAXIMUM REDUCTION OF VIBRATION, ADDITIONALLY PRECISE GRINDED, HARDENED BED DIGITAL READOUT OF THE AXIS IN STANDARD EQUIPMENT LARGE SPINDLE BORE PROVIDES OPTIMUM PERFORMANCE 52 mm THE APPROPRIATE BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS MACHINE EQUIPPED WITH HIGH-QUALITY AND HARDENED SPINDLE BEARING SYSTEM EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND EQUIPMENT WITH A ROLLER AND A DRAFT BOLT HARDENED WHEELS IN THE SPINDLE GEAR ADJUSTABLE CLUTCH OVERLOADS ON THE PULL SHAFT POSSIBILITY TO MACHINE THE FULL RANGE OF THREADS WITHOUT REPLACING THE WHEELS IN THE GUITAR FEED CHOICE LOCK: THROUGH SCREW OR SHAFT THE REMOVABLE BRIDGE ENABLES THE WORKING OF ELEMENTS WITH AN INCREASED DIAMETER RETRACTABLE CHIP DRAWER AND TOOL DRAWERS FOR BETTER AND EFFICIENT WORK Technical data MAXIMUM TURNING DIAMETER 400 mm MAXIMUM TURNING DIAMETER OVER THE BED 250 mm MAXIMUM TURNING DIAMETER IN THE SELECTION OF THE BRIDGE 520 mm TURNING LENGTH IN DEAD CENTRES 1000 mm BED WIDTH 218 mm SPINDLE END CAMLOCK D5 SPINDLE CONE MK6 SPINDLE BORE 52 mm Chsdpfx Adoiz Tczjdef SPINDLE ROTATION RANGE 65-1810 rpm SPINDLE SPEED NUMBER 16 ranges RANGE OF LONGITUDINAL FEED (40) 0,053 - 1,291 mm RANGE OF TRANSVERSE FEED (40) 0,011-0,276 mm THE MAXIMUM DIMENSION OF THE TOOL 20 mm x 20 mm METRIC THREAD 0,4-7 mm INCH THREAD 4-60 T.P.I. MODULAR THREAD (22) 0,4-3 mm THREAD D. P. (28) 8-84 D. P. TAILSTOCK QUILL DIAMETER 50 mm TAILSTOCK QUILL STROKE 110 mm TAILSTOCK TAPER MT4 ENGINE POWER 2,2 kW PUMP POWER 0,1 kW WEIGHT 640 kg DIMENSIONS 2000x820x1650 mm EQUIPMENT digital readout steady rest follow rest 200 mm 3-jaw chuck 200 mm 4-jaw chuck face plate 280 mm dead center MK4 x 2 reduction sleeve MK6/MK4 keys Factory new machine, under warranty For more information you can visit our web page.

Condition: new, Year of construction: 2025, TYTAN 750 VARIO Metal Lathe (230V) with Variable Spindle Speed Control The TYTAN 750 VARIO is a versatile metal lathe designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking, and reaming. With a working range of 250 x 750 mm and a DC motor (1.1 kW / 230V), it is ideally suited for small industrial workshops, repair shops, and home garages. Key Features Modern DC motor with stepless spindle speed control offers ease of use and minimizes setup time. LCD display shows real-time spindle speed, enabling precise adjustments during cutting and threading. Two spindle speed ranges: Low: 50–1125 RPM – for machining hard steels High: 100–2250 RPM – for high-speed precision turning Thread cutting capabilities: Metric threads – 18 types (0.2–3.5 mm) Imperial threads – 21 types (8–56 TPI) Capable of cutting both right- and left-hand threads Codpfx Adsw H Rausdshf Automatic longitudinal feed – 6 speed settings (0.07–0.40 mm/rev) significantly reduce machining time while maintaining accuracy during long part turning. Fully compliant with EU directives (CE) and DIN standards for safety and quality. Technical Specifications Parameter Value 3-jaw chuck 125 mm Max. turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Distance between centers 750 mm Max. part length (chuck to center) 700 mm Bed width 135 mm Tool post size 65 x 65 x 20 mm Max. tool size 12 x 12 mm Spindle bore 30 mm Spindle taper MT4 Spindle speed control Stepless (L/H range) Spindle speed range (L/H) 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 settings (0.07–0.4 mm/rev) Compound slide travel 70 mm Longitudinal slide travel 650 mm Cross slide travel 135 mm Tailstock quill diameter 30 mm Tailstock quill travel 60 mm Tailstock taper MT2 Motor power (S1/S6) 1.1 / 1.32 kW / 230 V Dimensions (L/W/H without stand) 1310 x 610 x 490 mm Dimensions (L/W/H with stand) 1350 x 560 x 1250 mm Weight (without stand) 165 kg Weight (with stand) 180 kg Standard Equipment 3-jaw chuck (125 mm) Fixed and traveling steady rests Change gears set Fixed center MT2 Fixed center MT4 Reversible chuck jaws (1 set) Grease gun Chip tray Chuck key and tool post wrench Service tool kit CE-compliant safety guards

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Cjdpfju Impgjx Addjhf Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: new, bore capacity in steel (diameter) 16 mm throat 185 mm bore stroke 50 mm 20 mm spindle taper MK 2 spindle diameter mm spindle turning speed range 100-1500 / 200-3000 U/min 175 mm 280 mm table surface area 500 x 180 mm connected load frequency 230 V total power requirement 0,85 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 0,86 x 0,6 x 0,9 m Drilling and milling machine - Cross Support Cjdpfxjurznws Addehf - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank