Used Tos Galanta for sale (9,016)

Condition: excellent (used), Year of construction: 2000, Metal lathe TOS GALANTA SUI 32A. Equipped with Newall digital readout and quick-change tool post with spare holders. 18 speeds ranging from 20–3150 rpm. 750 mm between centers. 390 mm swing diameter. Spindle bore 52 mm. 400V. The machine is in excellent condition! Iijdswxmuljpfx Ac Ajk

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Between centers 1500 mm Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Spindle power 5,5 kW Power required 16 kVA Dimensions L x W x H = 2900 x 1000 x 2200 mm Weight cca 1600 kgs Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load - Rapid speed - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest Isdpfjxiymtsx Ac Asik - Coolant unit - Manual The machine is in great and original technical condition. It was barely used. No DRO system on it.

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1000 mm centre height 200 mm centre distance 1000 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 1,8 t dimensions of the machine ca. 2,85 x 1,4 x 1,9 m voltage 400 V With chuck, Multifix toolholder and digital readout. Iodpfoxp Rzbox Ac Ajik

Condition: good (used), Year of construction: 1998, functionality: fully functional, TOS Galanta SUIL 40A – Lead and feed screw lathe For sale is a well-maintained, mechanically overhauled (2009) lead and feed screw lathe, TOS Galanta SUIL 40A, year of manufacture 1998. Technical Data Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1,620 kg Main drive: 5.5 kW Max. spindle speed: 3,150 rpm Spindle bore: 50.2 mm Distance between centers: 1,000 mm Center height: 200 mm Swing over bed: 400 mm Condition: ready for operation (used) Included accessories Isdpfx Acexy R Hxe Aeik Three-jaw chuck Tailstock Steady rest Coolant system Change gear set Operating manual (German) The machine is fully functional. Inspection possible by appointment.

Condition: new, Year of construction: 2025, travel distance X-axis: 12,000 mm, travel distance Y-axis: 6,500 mm, travel distance Z-axis: 2,000 mm, STOCK NUMBER ONY100000578 MODEL YEAR 2025 CONTROL PANEL HEIDENHAIN TNC 640 AXIS MOVEMENT X 12.000 MM / Y 6.500 MM / Z 2.000 MM INTERCHANGEABLE SPINDLE HEAD TYPES 6 1-)5001 MILLING ANGLE HEAD TYPE VP2 SPINDLE TAPER SK 50 / BIGPLUS SPINDLE SPEED (CONTINUOUSLY) 20– 4.000 REV. / MIN MAX. TORQUE OF SPNDLE 1.000 Nm MOTOR POWER OUTPUT ON THE MAIN SPINDLE 41 kW SPEED OF SPINDLE TURNING AROUND VERTICAL AXİS 1 - 1.800 °/ MIN MAX. TORQUE ARROUND THE VERTİCAL AXIS 2.500 Nm 2-)5005 MILLING ANGLE HEAD TYPE VP14 SPINDLE TAPER SK 50 SPINDLE SPEED (CONTINUOUSLY) 20– 4.000 REV. / MIN MAX. TORQUE OF SPNDLE 400 Nm Iiedpex Iutnjfx Ac Aok MOTOR POWER OUTPUT ON THE MAIN SPINDLE 15 kW SPEED OF SPINDLE TURNING AROUND VERTICAL AXİS 1 - 1.800 °/ MIN MAX. TORQUE ARROUND THE VERTİCAL AXIS 2.500 Nm 3-) MILLING ANGLE HEAD TYPE VPZSPEC. SPINDLE TAPER HSK-80A SPINDLE SPEED (CONTINUOUSLY) 20– 3.000 OT / MIN MAX. TORQUE OF SPINDLE 400 Nm MOTOR POWER OUTPUT ON THE MAIN SPINDLE 20 kW SPEED OF SPINDLE TURNING AROUND VERTICAL AXİS 1 - 1.800 °/ MIN MAX. TORQUE ARROUND THE VERTİCAL AXIS 2.500 Nm 4-) 1.1.2.1 STRAIGHT MILLING HEAD VA1 SPINDLE TAPER 7/24 ČSN ISO 9270-1(22 0435) SK 50 / BIGPLUS TOOL CLAMPING COLLET TYPE SPINDLE SPEED (CONTINUOUSLY) 20 – 4.000 RPM MAX. SPINDLE POWER S1-100% / S6-0% 41 kW MAX. SPINDLE TORQUE 2.000 Nm 5-) 5008 UNIVERSAL MILLING HEAD VO SPINDLE TAPER SK 50 SPINDLE SPEED (CONTINUOUSLY) 20 – 4.000 RPM TOTAL MOTOR OUTPUT ON MAIN SPINDLE 41 kW MAX. SPINDLE TORQUE 1.250 Nm SPEED OF SPINDLE TURNING AROUND AXIS ( C ) 1-1.800 °/ MIN MAX. TORQUE OF HEAD SWIVELING AROUND AXIS ( C ) 2.500 Nm 6-) 1.1.2.2 FULLY CONTINUOUS 2 AXIS MILLING HEAD VS SPINDLE TAPER 7/24 ČSN ISO 9270-1(22 0435) SK 50 SPINDLE SPEED (CONTINUOUSLY) 20 – 4.000 RPM TOTAL MOTOR OUTPUT ON MAIN SPINDLE 41 kW MAX. SPINDLE TORQUE 1.000 Nm ROTATION RANGE AROUND THE VERTICAL AXIS + / - 180° ROTATION RANGE AROUND THE CROSS AXIS + 120 ° / - 120 ° AXIS TO PERPENDICULAR TO CROSS AXIS 1-1.800 / 1-3.600 °/ MIN MAX. TORQUE AROUND CROSS AXIS 2.500 / 2.100 Nm CHAIN TOOL MAGAZINE TYPE R100 TOTAL POWER REQUIREMENT 240 KVA DIMENSIONS OF THE MACHINE 15.90 X 24.20 X 7.50 M

Year of construction: 2007, condition: ready for operation (used), Main Drive Number of axis 5 Movement X-Axis Movement 3500 mm Z-Axis Movement 1500 mm Iisdpfxox Imtas Ac Ajk Y-Axis Movement 1200 mm This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. Application Types Other Machine Tools

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES Iedpfxsxvb S Ro Ac Ajik – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 1994, Stroj v dobrém provozním stavu, včetně digitálního odečtu. Plocha upínacího stolu mm 400 x 800 Pracovní zdvih: podélná mm 600 kříž mm 400 vertikální mm 400 Kužel ve vřetenu ISO 40 Rozsah otáček rpm.40 - 2000 Počet otáček kroky 18 Výkon hlavního motoru kW 3,0 Celkový vstup stroje kVA 6,5 Rozměry stroje mm 1675 x 1680 x 1740 Hmotnost stroje kg 1725 Iisdpfx Asxdxp Noc Ask

Condition: used, Surface grinder, TOS BPH 20 NA, Used machine Manufacturer: TOS Type: BPH 20 NA Overall dimensions: Width: 1820 mm Ijdpfx Acjx Hgvlj Asik Depth: 1540 mm Height: 1800 mm Electrical data: 380V; 50Hz Table size: 835 × 250 mm Magnetic table size: 650 × 250 mm Maximum grinding width: 250 mm Maximum workpiece height: 350 mm Max. table load: 180 kg Grinding wheel: 260 × 35 mm Machine weight: approx. 1600 kg Accessories: Coolant system Magnet chuck mounted on the table (650 × 250 mm)

Condition: ready for operation (used), Max. diameter: 320mm Max. working length: 1000mm Ijdpfx Aex Iuurec Aeik

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, table load: 15,000 kg, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table length: 2,500 mm, table width: 1,800 mm, spindle stroke: 800 mm, Tos Varnsdorf WHQ 13 CNC boring mill with: - X-axis travel 5000 mm - Y-axis (vertical) travel 3000 mm - Z-axis (cross) travel 2200 mm - W-axis (quill) travel 800 mm - rotary table size 2500 x 1800 mm - Heidenhain iTNC 530 CNC control Iisdpswtmvxjfx Ac Aok - spindle speed 3000 rpm - 60-position tool magazine - high pressure through-spindle coolant - hinged belt chip conveyor - standard accessories included - year of manufacture 2012 - year of installation 2017 0% financing over 12/24 months available

Year of construction: 2020, operating hours: 2,421 h, condition: ready for operation (used), travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 940 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, number of axes: 4, Control Unit Brand HEIDENHAIN Model iTNC 640 Iisdpfxjx D Hhms Ac Aok Main Drive Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 1100 mm Z-Axis Movement 940 mm W-Axis Movement 710 mm Workpiece Workpiece weight 3000 kg This 4-axis TOS Varnsdorf WHQ 10 CNC boring machine was manufactured in 2020. It features a spindle diameter of 100 mm, ISO 50 taper, and spindle speeds up to 2500 rpm. The table can handle weights up to 3000 kg and includes a 40-position tool changer. Currently operational, though "Y" axis calibration is needed. Consider the opportunity to buy this TOS Varnsdorf WHQ 10 CNC boring machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: excellent (used), CATALOGUE NUMBER 7845 TECHNICAL DATA - track width: 240 mm - shaft width: 230 mm - max. blade diameter: 350 mm - blade bore diameter: 80 mm - max. cutting height: 120 mm - table width with clearance: 700 mm - table length: 1810 mm – from above: - pawls - sliding, pressure shaft: 1 pc - pawls - sliding shaft - shaft with saw blades - sliding, pressure roller: 2 pcs Iiedpfx Acex Hhvgs Aek – from below: - guide - infeed, sliding roller - pawls - track - stepless feed speed adjustment: 9–18 m/min - feed motor: 1.5 kW - main motor: 22 kW - extraction outlet diameter: 210 mm - overall dimensions (without guide) L/W/H: 2110x1520x1600 mm - weight approx.: 2000 kg ADVANTAGES – made in Czech Republic – used multi-blade saw – very good condition Net price: PLN 37,900 Net price: EUR 9,020 Net price calculated at exchange rate 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 300 kg, grinding length: 1,000 mm, grinding diameter: 400 mm, TOS BHU 40/1000 Cylindrical Grinding machine, grinding diameter 400 mm, grinding length 1000 mm, very good technical and visual condition. Technical specifications: Grinding diameter: 400 mm Grinding length: 1000 mm Ijdoxphdmepfx Ac Aoik Maximum workpiece weight: 300 kg Grinding wheel size: 600 × 150 mm Longitudinal table travel (X-axis): 1–1790 mm Rotating grinding head: ±45° Rotating table: ±5° Spindle taper: Morse 5 Maximum spindle speed: 1240 rpm Total connected power: 22 kVA Machine weight: approx. 6 t

Condition: good (used), Tailstock counter bearing for dividing head, dividing apparatus -Peak height: 95-115 mm -Recording: MK2 -Dimensions: 180/100/H110 mm Iiedpjb A Ntyjfx Ac Ajk -Weight: 4 kg

Condition: used, Year of construction: 1998, Tabulka 1800 x 1800 mm Průměr vřetena 130 mm Osy X x Y x Z ... 2000 x 2000 x 800 mm Vřeteno 800 ot/min Max. zatížení stolu 12 t Strojní dimesniony 6700 x 6000 x 4420 mm Hmotnost stroje 32 000 kg Iiodpfx Aswhpv Rjc Aek Řídicí systém MEFI 872 Series. Přestavěn v roce 1998.

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC426 Main Drive Spindle speed range 3500 Tool taper 50 ISO Movement X-Axis Movement 1600 mm Y-Axis Movement 920 mm Z-Axis Movement 950 mm Table Outer length 850 mm (extends to 1600 mm with supports) Outer width 850 mm Table load 3000 kg (5000 kg with supports) Media Chip conveyor Yes This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine. Application Types Other Machine Tools Ijdpex D Srwefx Ac Asik

Condition: excellent (used), CATALOG NUMBER: 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top section: - Anti-kickback fingers - Feed roller, toothed - Hold-downs, 2 rows - Infeed roller, toothed - Hold-down - Planing shaft, 510 mm, 4-knife, 7.5 kW motor - Hold-downs Iodpswqchfofx Ac Aoik - Discharge feed roller, smooth - 2 outfeed pressure rollers - Smooth feed roller – Bottom section: - Hold-down - Adjustable infeed table with slip roller - Planing shaft, 510 mm, 4-knife, 5.5 kW motor - 2 smooth slip rollers - Side pressure roller – Rear section: - Side spindles: 1) Vertical right: 140 mm, 4 kW 2) Vertical left: 140 mm, 4 kW - Spindle diameter: 40 mm - Fitted cutterheads: 4-knife, height 120 mm - Spindles adjustable up/down, left/right - Stepless feed speed adjustment - Electric table elevation - Extraction port diameters: 3x150 mm, 1x110 mm - Dimensions (L/W/H): 2300x1700x1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing – Electric table elevation – Manufactured in Czech Republic – Used planer in very good condition Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Year of construction: 1990, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 5000 rpm Tool taper ISO 50 Additional Equipment Automatic tool changer: 40 positions Working spindle diameter: 128 mm This 4-axis TOS WFQ80NCA-CNC/50 boring machine was manufactured in 1990. Consider the opportunity to buy this TOS WFQ80NCA-CNC/50 boring machine. Contact us for more information. Application Types Other Machine Tools Iiodpfex D R Idex Ac Aek

Condition: excellent (used), CATALOG NUMBER 7244 TECHNICAL DATA - max working width: 800 mm - max working thickness: 160 mm Top side: - smooth feed roller - anti-kickback fingers - segmented, toothed, feed roller (allows simultaneous planing of multiple elements) - 2 pressure rows - segmented, toothed, feed roller (sequential, sectional) - pressure unit - planing shaft 810 mm, 4 knives, 18.5 kW - pressure unit - smooth, metal feed roller Bottom side: - adjustable infeed table with smooth roller - smooth feed roller - planing shaft 810 mm, 4 knives, approx. 10 kW - 2 smooth, metal feed rollers, adjustable - metal, smooth feed roller - electric table elevation - stepless feed speed regulation 7–40 m/min Iiedporfb Nvofx Ac Ask - motor approx. 2.2 kW - extraction port diameter 200 mm / 180 mm - dimensions (L x W x H): 1950 x 2100 x 1700 mm - weight approx. 2500 kg – manufactured in the Czech Republic – very good condition – used planer Net price: 34,900 PLN Net price: 8,200 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Year of construction: 1996, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 426 Iiedox D Su Sopfx Ac Aok Controller Brand Heidenhain Model TNC 426 P Main Drive Spindle speed range 0 – 2500 Tool taper ISO 50 Number of axis 5 Movement X-Axis Movement 3500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1250 mm W-Axis Movement 800 mm Workpiece Workpiece weight 12000 kg This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW Iiodpfx Acslrvgus Aok - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. disc diameter: 350mm - Disc bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm Top section: - Pawls - Driven, toothed shaft - Pawls - Shaft with saw blades - Slip/pressure shaft Bottom section: - Rollers in front of the table, 2 pcs - Guide rail - Pawls - Track - Central track lubrication - Electric lifting of the saw shaft Iisdpfsuzu T Tjx Ac Ajk - Electric body lifting - Stepless feed speed control - Extraction port diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight approx. 4000kg ADVANTAGES – Czech manufacture – Used multirip saw – Very good condition Net price: 33,900 PLN Net price: 8,070 EUR (depending on the 4.2 exchange rate) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6913 TECHNICAL DATA - Track width: 360mm - Shaft width: 350mm - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm From above: - Pawls - Toothed feed roller - Pawls - Smooth slip roller - Roller with saw blades - Pressure slip roller From below: - 2 slip rollers before the worktable - Guide - Pawls - Track - Central automatic lubrication for track - Electric lifting of the saw blade shaft - Electric lifting of the main body Iiodpfjkytcxex Ac Ask - Infinitely variable feed speed adjustment - Feed motor approx. 2.5kW - Main motor 30kW - Overall dimensions (L/W/H): 2500x2300x1900mm - Weight approx. 4000kg ADVANTAGES – Czech production – 2 slip rollers in the worktable – Used multi-rip saw – Very good condition Net price: 34,900 PLN Net price: 8,300 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW - Smooth, metal slip roller Iisdpfxopmrkae Ac Aek - Electric table raising - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1900x1450x1350mm - Weight approx. 2500kg – Czech manufacture – Very good condition – Used planer Net price: 33,500 PLN Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations)