Lead/traction spindle lathe

Heidenreich & Harbeck Hanseat 480

Condition: good (used), Year of construction: 1980, Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: VDF Heidenreich & Harbeck, Leadscrew and Feedscrew Lathe Type V3 -Machine bed: hardened -Turning length: 1700 mm -Turning Ø over bed: 500 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 57 mm Csdpfx Aetvhrysddehf -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Bezel: 150 mm -Drive: 7.5 kW -Accessories: Keyless collet, tool holder, tools see photos -Dimensions: 1440/3370/H1515 mm -Weight: 2510 kg

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min Cedpfxjwwwqhj Addehf power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: good (used), Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: Meuser, lead screw lathe type M-IV-S -Machine bed: hardened Chsdpfx Adjwrfkfsdsf -Turning length: 3800 mm -Turning Ø over bed: 720 mm -Turning Ø over support: 440 mm -Spindle bore: Ø 95 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 400 mm -Tailstock mount: MK6 -Drive: 18 kW -Accessories: 1x bezel, Multifix tool holder, tools see photos -Dimensions: 5930/1650/H1600 mm -Weight: 7500 kg

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Chodpfxov A Sqhs Addof Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 short taper size 8 taper diameter 139,735 bolt circle diameter 171,4 mm Chsdpog Rxh Iefx Addof diameter 315 mm Jaws individually adjustable

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Cjdju Ix Izepfx Addshf Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm Chedpfx Aod Hl Steddof table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Condition: excellent (used), Precision lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: WEILER, lead screw lathe type commodor 42 -Machine bed: hardened -Turning length: 900 mm -Turning Ø over bed: 400 -Turning Ø over support: 190 mm -Spindle bore: Ø 56 mm -Spindle speeds: 45 - 2000 rpm -Three-jaw chuck: Röhm Ø 200 mm Cedpfexapm Rjx Addjhf -Four-jaw chuck: Röhm Ø 200 mm -Tailstock mount: MK3 -Drive: 4 kW -Accessories: 18x Multifix tool holder with rotating center see photos -Lathe dimensions: 2200/1300/H1410 mm -Weight of lathe: 1380 kg

Condition: ready for operation (used), Year of construction: 2021, Travel X/Y/Z: 630mm/530mm/465mm, tool holder: SK40, speed: 12000rpm, tool positions: 32, table dimensions X/Y/Z: 920mm/540mm, machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, weight: approx. 6500kg. Documentation available. On-site inspection is possible. Chodpfx Adewm Nphodjf

Condition: used, functionality: fully functional, spindle bore: 41 mm, turning length: 1,000 mm, Amutio Cazeneuve Lathe Model HB 500, 1000mm e.p. Max diameter on bed 500 mm, max diameter on cross slide 300 mm, shank hole 41 mm, 18 speeds from 25 rpm to 2000 rpm. With Fagor dimension display, with fixed and mobile rests, with protections, connected to 220 V Cedpfxjv Rnfqe Addshf