Flip-Flow Vibrating Screen

Hein Lehmann Liwell LF 3,0 - 8,82 / 28 ED

Condition: used, Year of construction: 1981, -1- used hard rock impact crusher, feed approx. 350 x 690, rotor 1000 x 670, capacity up to 40 t/h, with electric motor Duodsw N Hk Hepfx Adaep

Year of construction: 1987, condition: excellent (used), 1 piece chemical standard centrifugal pump with very few operating hours. Pump is suitable for acid condensate and aggressive acids. Also suitable for salt water! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Delivery volume: 250m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Dujdpfxjh S Nz So Adajp Year of construction: 1987 Pump speed of 1480 rpm is also possible! Delivery rate approx. at 1480 rpm (information without guarantee) Delivery rate: 430m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and piping in stainless steel are also available The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Dusdpfxofi Tg Hs Adasp Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: ready for operation (used), Varian 640-IR FT-IR Spectrometer The Varian 640-IR is a high performance spectrometer that makes FT-IR spectroscopy easy. With a range of unique, user-friendly hardware and software features, you can quickly become productive. Spectral range: 7900 - 375 cm-1 Spectral resolution of at least 0.25 cm-1 Dodpfx Adery Tqrsaeup Signal-to-noise ratio (the number of scans is 100, with a standard configuration with a spectral resolution of 4 cm-1): at least 10000 cm-1 The level of pseudo-scattered light is not more than 0.1% Integration time: 5 s Monochromator: High-speed Cerny-Turner No software Description has been adopted. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2021, condition: ready for operation (used), A silo system consisting of 3 storage silos, 1 weighing silo and conveying units is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, storage silo volume: 32.6m³, weighing silo volume: 13.8m³. Storage silo capacity at 0.2t/m³: 6500kg, weighing silo capacity at 0.2t/m³: 2800kg. Storage silo dimensions X/Y/Z: 4200mm/4200mm/4200mm, weighing silo dimensions X/Y/Z: 3000mm/3000mm/3400mm, control: Siemens S7. Including steel frames, gate valves, full and demand indicators, filter bags, filling line, conveying and dosing system, rotary valves and gate valves. Documentation available. On-site inspection is possible. Dodpfxsv Ip Stj Adaeup

Year of construction: 2004, condition: good (used), Manufacturer: Hein Lehmann Type: LF 2,0 – 6,30 / 30 ED Dujdpfx Ash Ty Tqedaop Size: 2.000mm x 6.300 mm Decks: 1 Year of Manufacture: 2004 With Frame.

Year of construction: 1990, condition: new, Brand SKF Type 6202-Z/QE6 Year of manufacture: Unused Weight (kg) approx. 9400 gross / 8780 net Number of pieces in stock 193.200 ( approx) Made in France Comments Contact us for min. quantity Djdeqa Am Tepfx Adasup Verkoopcondities Contact us for min. quantity

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, For sale is a FTIR spectrometer - NICOLET IS20 MID-IR DTGS spectrometer which was used for one year as part of a research project. Operation in laboratory environment; no damage; Scope of sale: 1x NICOLET IS20 MID-IR DTGS spectrometer 1x IS20 German device labeling 1x European Schuko plug, 250V 1x ATR ITX BASE Dsdpferklx Ijx Adaeup 1x AR diamond crystal for Smart iTX ATR 1x COMP-U-16 Upgrade from monitor 20" to monitor 24" 1x iS10-iS20 TRANSMISSION ACCESSORY 1x ST JAPAN ATR-FTIR POLYMER BUNDLE 1x DELL OPTIPLEX 3090 MT - I3-10105 8GB NP: € 31.998.,77 Sale EXW, tel que

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Dujdpfx Adeq Nf Uwoasp Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws Djdpolxzl Eofx Adaoup - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers - container for liquid extracts, etc.