Eccentric Press - Single Column
HELMERDING ERH 75 B

Name: HELMERDING ERH 75 B
Brand: HELMERDING
Availability: InStock

Year of construction

1990

Condition

Used

Location

Schmölln

Eccentric Press - Single Column HELMERDING ERH 75 B

Show map

Machine data

Machine type:: Eccentric Press - Single Column

Manufacturer:: HELMERDING

Model:: ERH 75 B

Year of construction:: 1990

Condition:: used

Price & Location

Location:: 04626 Schmölln

Call

Details about the offer

Listing ID:: A4040479

Reference number:: 1010-866

Update:: 07.05.2024

Description

pressure 75 t
throat 300 mm
stroke 8 - 110 mm
table surface area 750 x 600 mm
ram adjustment 75 mm
ram surface 430 x 230 mm
Bsdsd Nl E Uspfx Addjdk
hole in the table 250 x 150 mm
tool hole in ram 40 mm
no. of strokes 60 + 90 Hub/min
weight of the machine ca. 4,4 t
total power requirement 4,5 - 6,8 kW
dimensions of the machine ca. 1,95 x 1,1 x 2,35 m
distance table/ram Hub unten, Stöß. unten 19 mm
distance table/ram Hub oben, Stöß. oben 380 mm

Furnishing:
- with hydraulic clutch-brake combination, with new hydraulics and oil cooler
- with gear transmission in oil bath
- fixed table prepared for the attachment of tool changing consoles
- 2 roller bars in the table
- mechanical overload in the ram

The following work is carried out on the machine / partial overhaul:
- Machine is completely disassembled, checked, seals changed, defective parts
exchanged etc
- Machine is repainted
- new Balluff cam control
- new hydraulic unit with oil cooler for the clutch
- new Vogel central lubrication
- new control cabinet with touch panel and ABB safety control
- Current UVV test with braking time measurement

Seller

Registered since: 2013

76 listings online

Call

Send inquiry

Telephone & Fax

+49 34491... show

These listings may also fit your interest.

Listing

Emmegi Comet T6 machining center Emmegi Comet T6

Scerne

6,455 km

Emmegi Comet T6 machining center
EmmegiComet T6

Call

Year of construction: 2002, condition: good (used), AXIS COURSES X AXIS (longitudinal) (mm) 7,700 Y AXIS (transverse) (mm) 470 Z AXIS (vertical) (mm) 420 AXIS A (spindle rotation) 0°  180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Tool attachment cone HSK - 63F Automatic tool holder coupling ● Cooling with heat exchanger ● AUTOMATIC TOOL MAGAZINE ON BOARD CARRIAGE Maximum number of tools magazine 8 Maximum number of angle heads that can be inserted into the tool magazine 2 Maximum blade diameter that can be inserted in the magazine (mm) Ø = 180 FUNCTIONS. Multipiece operation ● Dynamic pendulum operation ● MACHINABLE FACES With direct tool (top face, side faces) 3 With angle unit (side faces, heads) 2 + 2 With blade tool (top face, side faces and heads) 1 + 2 + 2 TAPPING CAPACITY With compensator M8 Rigid (optional) M10 WORKPIECE CLAMPING Standard number of vices 8 Maximum number of vices 12 Independent motorized vices ● Maximum number of vices per zone 6 2021/04/01 w Bodpfx Aderupldsdedk

See details

Listing

Brushing machine, grinding machine, deburring machine - Italy MASTER ROTOR 400.2 / Special 5

Egenhofen

6,695 km

Brushing machine, grinding machine, deburring machine
- ItalyMASTER ROTOR 400.2 / Special 5

Call

Condition: new, Year of construction: 2024, Working width: 380 mm Working height: 150 mm 1. Unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with a 3 kW motor 2. Unit, brush: Scotch Brite Hard / diameter 210 mm, variable drive Height adjustment: handwheel Bjdetnf Rropfx Addsdk Height display: mechanical counter Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

See details

Listing

Four-jaw chuck (28188) type Wescott ROTO RECORD DHK 315 x 4

Tönisvorst

7,036 km

Four-jaw chuck (28188) type Wescott
ROTO RECORDDHK 315 x 4

Call

Listing

Villingen-Schwenningen

6,887 km

High Speed Press
BSTA 18

Call

Condition: refurbished (used), Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Bedpfx Adsfmavxsdedk Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar. More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

See details

Listing

Automatic Punching Press BRUDERER BSTA 30

Eislingen/Fils

6,803 km

Automatic Punching Press
BRUDERERBSTA 30

Call

Condition: used, Year of construction: 1979, machine/vehicle number: 5255, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:540 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm Bdsdocxxu Njpfx Addjk distance between columns:330 x 300 mm total power requirement:5,5 kW weight of the machine ca.:3 t dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

See details

Listing

Wölzing-Fischering

6,411 km

Lathe - cycle-controlled
WEILERC 50

€32,500

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Bdjdpfx Aowxw S Ioddek Immediately available! Can be tested under power.

See details

Listing

Punching stamping bending former machine BIHLER RM 40

Lyon

7,182 km

Punching stamping bending former machine
BIHLERRM 40

Call

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Bdsdpfx Ajh T Ulysddok Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole

See details

Listing

Laser cutting machine MAZAK Hyper Gear 510

Großrudestedt

6,714 km

Laser cutting machine
MAZAKHyper Gear 510

Call

Year of construction: 2007, condition: excellent (used), TOP CONDITION - OVERHAULED IN 2022! Year of construction: 2007 Table format: 3000 x 1500 x 100 mm Power: 4000W Control: Mazatrol preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick piercing incl. ball roller table incl. 4 x head change magazine incl. 2 cutting heads incl. 10 x automatic nozzle changer Bedpfxohturvs Addodk FE: up to 20mm VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced

See details

Listing

Lead & Pull Spindle Lathe WEILER Primus GS 4443

Burgoberbach

6,740 km

Lead & Pull Spindle Lathe
WEILERPrimus GS 4443

€5,500

Fixed price plus VAT

Call

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, For sale is a lathe of the brand Weiler type Primus LZ-GS The machine is in very good condition Technical data Bdodpfxoihig Io Addjk Year of construction 1989 Machine no. 4443 Operating voltage 380 V Center height 120 mm Center width 430 mm Speed:60 - 3000 rpm in 18 gear stages Spindle clearance 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feed rates from 0.03 to 0.15 mm /rev Possible threads metric, inch, module and diametral pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

See details

Listing

DYAS PDC 1500 / CNC Plate Drilling Dyas Machinery Dyas PDC 1500

Minareliçavuş OSB

5,195 km

DYAS PDC 1500 / CNC Plate Drilling
Dyas MachineryDyas PDC 1500

Call

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Bdodpfx Aegbfaxsddek Max. Drilling Capacity (mm) Ø40 mm

See details

Advertise here