Drier

HERBOLD T 508

Condition: used, kW: 30 Rotor diameter: 500 mm Rotor width: 1200 mm Hsdpfx Aoxgtqysgweni

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Fully functional and well maintained Complete with control cabinet, fences and hydraulic unit, valves etc. Various fruits such as apples, pears, grapes, berries, raspberries, strawberries, quinces, pectin, carrots and other fruit and vegetable can be processed on this press. Hnjdpfow Adkfex Agwsi Prompt delivery.

Year of construction: 2007, condition: excellent (used), Vacuum unit VC999 07P BJ:2007. 400V connection. Dimensions chamber approx. 88x50x15cm, with 2x CLFH 220 Rietschle vacuum pumps. Bj:1998 Power 2x 5.5 kW. Very good condition, works perfectly. Hnedpfxof Srcfj Agwei

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Hnodpfxstvau As Agwji Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: like new (used), Intact vacuum skin packer Hodpofg Agqjfx Agweni Model: RM571 Serial: 8215 Stainless vacuum skin packer, chamber dimensions 700mm x 500mm x 110mm, adjustable timer controls, various moulds, 3Ph

Condition: excellent (used), Year of construction: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of production: 2008 A gravimetric dosing and mixing unit designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. The actual, measured and weighed quantities are constantly compared with the set values using a modern microprocessor-based control system, which guarantees very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: 2 feed tanks for primary material or regranulate/primary material 2 feed tanks for masterbatches or additives 2 pneumatically controlled conical dosing heads 2 precision dosing screws with motor drive Material tanks – capacity approx. 7 litres Weighing tank – capacity approx. 0.8 litres Mixing tank – capacity approx. 3.0 litres Hodpfx Agswm Ii Towjni Manually operated gate valve GRAVInet controller with colour touch panel for recipe, milled material and process data management, vibration compensation and continuous self-optimisation; built-in Ethernet port and standard reporting/printing functions Technical data: Average capacity: 60 kg/h Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Compressed air: 6–8 bar, without oil and water Weight: approx. 60 kg ✅ The set includes Piovan material feeders - visible in the photos.

Condition: good (used), “Rentec Dinosaurus 2600S” for Sale Hsdpsvt Tptefx Agwoni Manufacturer: Rentec Type: Dinosaurus 2600 S Included Hydraulic-unit and control-unit build in container. With overhauled rotors. Also outlet conveyor in stock which fits to the Rentec Dinosaurs 2600S. See PDF-file below for more detailed information.

Condition: like new (used), Year of construction: 2024, Equipment: type plate available, Volumetric dosing systems - granules, powders and ground material We offer a range of fully functional volumetric dosing systems that are ideal for conveying granules, powders and ground material. • Various models available: We have different dosing systems in stock that can be adapted depending on the material and application. • Testing option: On request, we will test the dosing devices with your material to ensure that they meet your requirements. • Reliable function: All systems are tested and ready for immediate use. Hnedpfovmylzox Agwji Contact us and we will help you find the right doser for your requirements. We are happy to answer any questions or provide advice!

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, Satrind 8/25 Twin Shaft Shredder, 18KW Motor (brand new) 30 x 50 mm 1 pick blades. Cutting Chamber 758mm x 700mm machine built onto stand with hydraulic ram that can be operated independently of control panel by a remote control. The machine has been completely refurbished with new blades, resharpened new bearings, seals & safety switches fitted & can be seen working. Ideal for plastic drums, crates, bins. Hjdpfewxfggox Agwjni For price contact seller for more information & a video of the machine operating if required.

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Hsdpeu Afz Rsfx Agwoni