Five-axis machining centre

HERMLE C 800 U

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Bsdpfszv Syfex Af Aowu Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Bear weight 630kp Bodpfx Aou Eb Nijf Aewu Top pressure - filling pressure 5 bar

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm Bwjdox Dndcjpfx Af Aju y-travel 600 mm z-travel 500 mm

Condition: excellent (used), HEIDENHAIN TNC430 with B + C axis Working travels 800 x 600 x 500 mm Bedpfok Dz Ngjx Af Aowu Table size Ø 280 mm Table swivelling +/-110° Table rotating 360° Spindle taper HSK63 Spindle speeds -15'000 rpm tool changer 30 pos. Coolant through spindle 3D tracer Renishaw MARCELS MASCHINEN CH

Year of construction: 2002, condition: not inspected (used), Robot Bodogu U Itopfx Af Aewu no control panel + connection cables Used, untested robot. No technical documentation available. Not tested.

Condition: used, Year of construction: 2023, turning diameter 380 mm turning length 1000 mm control Mazatrol SmoothG max. swing diameter over bed 695 mm Standard machining diameter 276 mm bar material dia. max. 80 mm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 1090 mm rapid traverse Z-axis 33 m/min w-axis 1050 mm rapid travel W 30 m/min turning speeds 35 - 4000 U/min spindle nose A2-8 spindle bore 91 mm Motor output (30-min. rating) 26/22 Max. Torque 465 (15% ED) Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (25%ED) 11 Max. Torque 90 (15% ED) Nm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 x 2,5 coolant tank 270 l Chuck diameter main spindle 10 '' Chuck diameter counter spindle 8 '' total power requirement 37 kW weight of the machine ca. 6,6 t dimensions of the machine ca. 3,6 x 2 x 1,9 m Machine in standard configuration, equipped with the following optional equipment: Air blast through the turret Automatic operator door – opening and closing Air blast system at the main spindle chuck Chip conveyor High-pressure coolant system, 15 bar Robot interface (ADVANCE / Ethernet/IP) C-axis on the sub-spindle, input resolution (contour/indexing): 0.0001° Additional push buttons on the CNC control panel Sub-spindle tailstock function Rectangular 3-colour LED signal light Preparation for oil mist extraction, mechanical flange only, Ø 98 mm Absolent 10C oil mist extraction system Preparation for bar feeder Overload monitoring system Bwjdpfx Afszzd Rto Aeu Drilling cycle with torque-dependent chip breaking Engraving function Thread re-cutting function All dimensions, weight and performance specifications are non-binding. Used machine – sold without warranty.

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Bwsdpfx Afjwtg Ino Aju Weight: 6000 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Bwodpez Dp Dbsfx Af Aou Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Active cooling unit for main spindle and linear drives Direct absolute linear encoders 3D control Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Electronic handwheel Bsdpfxezlhmme Af Aswu Coolant gun Compressed air Production package EROWA Robot Compact 80 50 pallet positions for ITS 148

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. Bsdpfxoyia Tle Af Ajwu • A-axis rotation: +90° / -120° • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm • Rapid feed (all axes): 50 m/min • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm • Tool magazine: 64 positions (expandable to 166) Technical Specification Taper Size HSK 63