Used universal milling and boring machines for sale (53)

Condition: ready for operation (used), Kölsch / Beichle Uni1-Uni4 / Universal milling machine - Universal rotary table - Coordinated milling paths X / Y / Z - Suitable for general milling operations and partial and full circular milling - Additional three-jaw chuck Dimensions: L x W x H 1.7 x 1 x 1.9 meters / Weight 950 kg Errors and omissions excepted. Bsdpfjz Eyyisx Af Asln

Condition: excellent (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: Z45, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 500 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 1 m/min, position of the milling head: pionowa, spindle speed (max.): 2,050 rpm, spindle speed (min.): 30 rpm, total height: 2,180 mm, total length: 2,475 mm, total width: 2,260 mm, rotational speed (max.): 2,050 rpm, rotational speed (min.): 30 rpm, overall weight: 5,000 kg, table length: 1,600 mm, workpiece weight (max.): 1,800 kg, table load: 1,800 kg, table width: 500 mm, torque: 18 Nm, Equipment: rotational speed infinitely variable, Universal milling machine EUROMETAL FUS 50, year of manufacture 2021, equipped with a T-slot table 1500x500mm, servo motors on three axes X, Y, Z controlled by manual handwheels or automatic feed function, rapid traverse, digital parameter readout, ISO 50 spindle taper, mechanical spindle speed adjustment range 50-2050 rpm, swiveling vertical milling head, spindle brake for tool change, automatic central lubrication system, cooling system, work light, ER40 tool holders and holders for the head; traverse range X – 1200mm, Y – 700mm, Z – 500mm. The milling machine is in perfect condition after approx. 100 hours of operation. Bedsy Nmngjpfx Af Asln

Condition: excellent (used), Year of construction: 2004, FAMUP MC 120 E Siemens Year of manufacture: 2004 M-120.206.04 Bodpfx Asz Hw Dhef Asln

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,000 rpm, total length: 1,000 mm, total width: 800 mm, spindle mount: MK 2, type of input current: three-phase, The three-phase 380-volt motor is running smoothly. Geared headstock, with gears running in oil. Six spindle speeds are adjustable from 120 to 2000 RPM. Head height and angle are adjustable. MT2 spindle taper. Power table feed with three adjustable feed rates: 33-65-170 mm/min. Maximum distance between table and spindle: 375 mm. Cross table dimensions: 630x150 mm. Adjustable LED machine light. Emergency stop switches. Overall in good condition. Made in Austria. Dimensions: 80x100x185 cm. Includes all accessories as shown in the pictures, located on the floor next to the machine. Blodpfozycprsx Af Aon Contact us for shipping options! €2,650.00

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, total height: 2,150 mm, total length: 1,900 mm, total width: 1,400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, table length: 400 mm, table width: 800 mm, MEXPOL D40A1 Universal Tool Milling Machine with HEIDENHAIN Digital Readout and Counter Support For sale is a robust MEXPOL D40A1 universal tool milling machine, manufactured in 1998. This machine is ideally suited for toolmaking, general mechanical engineering, single-part and small-series production, as well as repair and training workshops. The milling machine is equipped with a HEIDENHAIN ND 780 digital readout, which enables precise and convenient operation. The sturdy cross table with T-slots offers versatile clamping options. In addition, the machine features a coolant system and a counter support for supporting milling arbors during horizontal milling operations. The swiveling milling head expands the range of applications and enables flexible machining of various workpieces. The machine is in a well-maintained, used condition and was in operation until recently. Technical data: Manufacturer: MEXPOL Type: D40A1 Year of manufacture: 1998 Factory number: 50443 Machine type: Universal/Tool Milling Machine Spindle mount: SK 40 Speed range: 50 - 315 + 400 - 2500 rpm (9 steps) Feed rate range: 10 - 63 + 80 - 500 mm/min (9 steps) Travel (X / Y / Z): 600 × 400 × 430 mm Table dimensions: 800 x 400 mm T-slots: 7 pcs, 14 mm wide 3-axis digital readout: HEIDENHAIN ND 780 Coolant system Counter support Swiveling milling head Equipment: HEIDENHAIN ND 780 3-axis digital readout, swiveling Bodpozfxubjfx Af Aeln Swiveling control panel Coolant system Hydraulic tool clamping Drilling quill Counter support for milling arbor operation Work light Handwheels for all axes Fold-up, all-around chip guard with gas springs Total weight: approx. 1,500 kg Machine dimensions: approx. 1900 × 1400 × 2150 mm (L x W x H) Subject to prior sale and errors.

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,000 mm, total length: 7,000 mm, total width: 2,500 mm, type of input current: three-phase, workpiece weight (max.): 5,760 kg, table height: 900 mm, working range: 6,000 mm, working width: 2,000 mm, cutting height (max.): 900 mm, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, working length: 6,000 mm, Equipment: documentation/manual, Fully functional plasma cutting machine in good condition for sale due to a change in equipment type. Blsdpfx Afsyid Aws Asn

Condition: like new (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,800 mm, total length: 1,500 mm, total width: 1,700 mm, overall weight: 1,550 kg, The machine comes from a training workshop and has hardly ever been used. Bjdpfxjzq Hzys Af Asln Condition: Like new.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, total length: 800 mm, table width: 460 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, warranty duration: 3 months, Equipment: documentation/manual, We are offering this fully overhauled Deckel FP4 M milling machine, year of manufacture 1985. Manufacturer: Deckel Blsdpsx Sllpsfx Af Aen Model: FP4 M Year: 1985 Condition: overhauled Control: TNC113 Aktiv control Optional: universal table with a clamping surface of 800mm x 370mm If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 500 mm z-travel 400 mm table-size 900 x 530 mm control Heidenhain TNC 355 tool adaptor ISO 40 | | turning speed range 40- 4000 U/min Bedpfeyxr Hmsx Af Aeln rapid speed 5 / 6 m/min feed speeds 2 - 3000 | mm/min | power requirement 6 kW table load 350 kg dimensions 2,6 x 1,8 x 2,2 m weight 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head

Condition: used, Year of construction: 2010, Milling machine, manufacturer Knuth, model UFM 3 Plus. Digital display, numerous accessories included. Bedpfx Afsz Aff Uj Asln

Condition: used, Year of construction: 2009, rapid traverse X-axis: 32 m/min, total height: 2,250 mm, total length: 4,295 mm, total width: 2,575 mm, overall weight: 8,800 kg, POS PosMill Typ 1100 3-axis CNC milling machine Vertical CNC machining center with a machine table size of approx. 1,050 x 600 mm. Equipped with a HEIDENHAIN TNC 430 CNC control. Automatic tool changer. Equipment: cooling system with through-spindle coolant (IKZ), hydraulic system, and chip conveyor. Weight approx.: 8,800 kg Control: HEIDENHAIN (TNC-Serie) Grinding spindle speed: 10000 - rpm Travel Y-axis: 600 - mm Dimensions of the clamping surface: 1050 x 600 mm Blodsy S Nifepfx Af Asn Rapid traverse: 32 m/min Travel Z-axis: 510 - mm Travel X-axis: 1100 - mm Dimensions (LxWxH) approx.: 4295 x 2575 x 2250 mm Year of construction: 2,009 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, Year of construction: 2011, total height: 3,000 mm, total length: 4,200 mm, total width: 2,500 mm, overall weight: 7,800 kg, POS PosMill Type C1050 – Universal Milling MachineUniversal milling machine with travel paths X 1,050 mm / Y 530 mm / Z 630 mm and table size 1,150 x 560 mm.CNC control HEIDENHAIN iTNC 530.Hydraulic system for precise movements.Equipment: Coolant system and chip conveyor.Machine with protective devices and emergency stop system. Travel X-axis: 1050 - mm Control: Heidenhain iTNC 530 Bodpfx Afoy S Nh Ie Ajln Dimensions of the clamping surface: 1150 x 560 mm Travel Y-axis: 530 - mm Table length: 1,150 mm Dimensions (LxWxH) approx.: 4200 x 2500 x 3000 mm Weight approx.: 7,800 kg Travel Z-axis: 630 - mm Year of construction: 2,011 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, Year of construction: 1995, functionality: fully functional, Travel paths: X-axis: 800mm Y-axis: 500mm Z-axis: 550mm Clamping area: Universal rotary table (3x manual rotary axis, 1x manual linear axis) Ø900mm x 614 mm T-slot: 14H7 Working spindle: Tool holder: ISO40 Quill, stroke: 80mm Pull stud: ISO 7388/2 B Spindle speed: 20 – 4000 rpm Feeds: 1 - 3000 mm/min Rapid traverse: X/Y-axis: 5 m/min Z-axis: 6 m/min Control: CNC 415 with electronic handwheel Weight: approx. 4,200 kg Year of manufacture: 1995 Machine specifics: Spindle with new bearings: 03.2025 Display: graphic error (color rendering issue) Z-axis: stiff movement toward end position (-Z) Bledpfx Aey Edu Nof Ajn

Condition: good (used), Year of construction: 1966, Universal milling machine cover FP2 -WKG 512- On offer here is a universal milling machine from the manufacturer Deckel, type FP2. Technical data Manufacturer: Deckel Model: FP 2 Year of manufacture: 1966 Blodpfourk Exsx Af Asn Clamping surface: 730 x 240 mm Hydr. vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm - 17.5 mm

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, DECKEL FP4M Universal milling machine (1984) Serial number: 2203-1545 Control: HEIDENHAIN POSITIP 855 Travel distances: X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Rapid traverse rate: 1300 mm/min Blodpszmhlfofx Af Aon Feed rate: 8 – 630 mm/min Table dimensions: approx. 800 x 460 mm Max. table load: approx. 600 kg Spindle speed range: 50 - 2500 rpm Tool holder: SK40 Without machine vice.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 220 mm, travel distance Y-axis: 400 mm, spindle speed (max.): 3,800 rpm, spindle speed (min.): 85 rpm, total height: 1,800 mm, total length: 1,100 mm, total width: 1,050 mm, type of input current: three-phase, table width: 780 mm, 3 Phase 380V motor is running fine! Stepless speed adjustment due to the variomatic spindle drive. Spindle RPM adjustable from 85 up to 3800. Large cross table in very good condition! Table size: 780x300mm Adjustable drilling depth. Maximum drilling depth: 130mm Head is height adjustable and can swing left & right. Maximum distance between table and spindle: 430mm Travel X axis: 220mm Travel Y axis: 400mm ISO 30 spindle taper. Overall dimensions: 110x105x180cm Includes accessories as shown in the pictures next to the machine. Bledpfx Afow Th S To Aen Contact us for shipping options! € 2,400.00 EX VAT

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 60 mm, total height: 1,935 mm, total length: 2,000 mm, total width: 200 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, overall weight: 1,445 kg, table length: 460 mm, workpiece weight (max.): 400 kg, table load: 400 kg, table width: 800 mm, year of last overhaul: 2013, warranty duration: 6 months, The machine was completely and professionally overhauled by us in 2013. We were able to repurchase the machine from a customer who had used it very little, and we fully serviced and inspected it. Control 3-axis - Active - Digital display HEIDENHAIN TNC 113 Speed 50 - 2500 rpm, geometrically stepped direct drive with 18 speed stages for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Rapid Traverse 1.3 m/min Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread, optionally: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 500/400/400 mm Table Rigid angle table 800x460 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Central lubrication Options • Z-axis bellows • Chip tray • Machine lamp • Universal table • Rotary table Blodpfxjyitxqs Af Aen • Slotting head • Dividing attachment • Counter-holder • etc.

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, rotational speed (max.): 2,900 rpm, rotational speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, overall weight: 260 kg, table length: 560 mm, table width: 250 mm, 3-phase 380V, 2-speed motor is running perfectly! Spindle RPM adjustable from 100 up to 2900. Geared head. 115mm drilling depth. MT3 spindle taper. Head adjustable in height and angle. Coolant pump in base. Cross table in good condition. Table dimensions: 560x250mm Bedpfx Afjxnvrvs Aeln Made in Sweden! Overall dimensions: 100x75x170cm Includes all accessories shown in the pictures. Contact us for shipping options! €2,800.00 EX VAT!

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 375 mm, travel distance Y-axis: 230 mm, spindle speed (max.): 1,700 rpm, spindle speed (min.): 115 rpm, type of input current: three-phase, overall weight: 200 kg, table length: 700 mm, table width: 190 mm, power: 0.75 kW (1.02 HP), distance table to spindle center: 405 mm, WMD32G - ROGI Gear-Driven Milling and Drilling Machine Drilling Capacity ----- 32 mm Face Milling Capacity ----- 63 mm End Milling Capacity ----- 16 mm Work Table Dimensions ----- 700 x 190 mm T-Slot Dimensions ----- 12 mm Spindle Taper ----- ISO30 Max. Distance Spindle - Table ----- 405 mm Spindle Travel ----- 75 mm Head Tilting ----- Left / Right 45 Degrees Table Longitudinal Travel ----- 375 mm Table Cross Travel ----- 230 mm Speed Range 115 - 1700 rpm Weight ----- 200 KG Motor ----- 750W AC Voltage ----- 230V (INVERTER) INCLUDES * 3-axis digital readout SINO * Floor stand * Digital depth stop * ISO30 milling arbor including 6 collets * Drill chuck with shank DIN2080 / ISO30 Blsdpfx Ajx N Ndqef Aen * Left / Right switch * Spindle guard * Drift key

Condition: good (used), Universal tool milling machine Mikron WF 2 Manufacturer: Mikron Type: WF 2 Machine category: Universal tool milling machine Spindle speeds: 12 Speed range: 50–2240 rpm Spindle speed step: 1.4 Feeds: 18 Feed range: 8–400 mm/min Feed step: 1.25 Rapid traverse rate: 1400 mm/min Bjdpozw U Nfofx Af Aoln Milling spindle motor: 2-speed, 1.2/1.8 kW at 1400/2800 rpm Feed motor: 0.55 kW at 1400 rpm Coolant pump motor: 0.1 kW at 2800 rpm Longitudinal travel X: 420 mm Transverse travel Y: 250 mm Vertical travel Z: 335 mm automatic / 340 mm manual Vertical travel with optical measuring system: 300 mm automatic / 310 mm manual Clamping surface of fixed angle table: 250 × 700 mm Machine weight with vertical milling head and angle table: approx. 770 kg Weight with all accessories: approx. 1250 kg Position indicator: digital for X/Y/Z Machine vice: included Tool holders and collets: extensive range of accessories available Operating manual: included No guarantee is given for the accuracy, completeness, or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2001, Power: 4.5 kW Drilling capacity: 30 mm End milling: 25 mm Motor power: 0.85/1.5; 2.2 kW Blodpezvnldjfx Af Aen

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, CNC Universal – Milling and Drilling Machine DECKEL MAHO DMU 80 T With Heidenhain iTNC 530 path control Year of manufacture: 2002 Travel ranges: X 880 Y 630 Z 630 Spindle speed range: 0 – 18,000 rpm, stepless (SK 40) With the following accessories: NC rotary table, 700 mm, integrated into a fixed angular table, 1250 mm x 700 mm Clamping surface Blsdpfsz Dwd Aox Af Asn Vertical tool changer with 32 magazine slots (SK 40) Full enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 + 4 Spiralscrew conveyor Coolant system 3-piece adjustable machine feet Spindle oil cooler Control cabinet cooler (Rittal) Operating manuals

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head Bledpfxjxuh Rdo Af Ajn - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: used, Year of construction: 2018, total height: 4,000 mm, total length: 5,100 mm, total width: 3,800 mm, overall weight: 20,000 kg, POS POSmill H 800 U – 5-axis machining center The machine is designed as a 5-axis machining center and features a swivel axis with a range of -120° to +120°, as well as a rotary table with a continuously rotating 360° C-axis. A separate A-axis is not available. The working area is realized by a high-quality Kessler rotary table with a diameter of 800 mm. The machine is not equipped with a pallet changer. A key highlight is the 96-position tool changer, making the machine ideal for series production as well as complex machining tasks. In combination with the integrated through-spindle coolant system (IKZ) with 50 bar, the machine is well suited for demanding applications in toolmaking and the automotive industry. Operating data: Control ON: approx. 25,280 h Machine ON: approx. 24,730 h Program run: approx. 9,150 h Spindle hours: approx. 8,555 h 5-axis machining: Yes Spindle speed: 18000 - rpm Travel Y-axis: 820 - mm Dimensions (LxWxH) approx.: 5100 x 3800 x 4000 mm Weight approx.: 20,000 kg Control: Heidenhain ITNC 530 Travel Z-axis: 600 - mm Travel X-axis: 670 - mm Bljdpfoy An A Ejx Af Aen Year of construction: 2,018 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, Year of construction: 1986, x-travel 500 mm y-travel 360 mm z-travel 400 mm Control Siemens 810 tool taper SK 40 table surface area 800x390 mm T-slot - width 14H7 mm number of T-slots 6 T-slot - distance 63 mm turning speeds 20-4000 U/min transmission ratio 4 Feed 1-2000 mm/min rapid traverse 5 m/min total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5x2,9x1,9 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Blsdeyt R Eispfx Af Ajn More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team