Center lathe

HEYLIGENSTAEDT 500 En/400

Year of construction: 1940, condition: used, Automatic universal gear hobbing machine for manufacturing spur gears and helical gears. Largest milling diameter: 120 mm Smallest milling diameter: 5 mm Smallest tooth pitch: Module 0.30 Largest tooth pitch: 2 mm Largest milling length: 100 mm Ppsdekw T Rmopfx Abhou Complete with all accessories.

Condition: good (used), Centre height: 290 mm Centre distance: 3000 mm Swing diameter over bed: 580 mm Swing diameter over cross slide: approx. 400 mm Spindle bore: 63 mm Spindle mount DIN 55027: Size 8 Speed range: 25 – 1120 rpm Bed width: 365 mm Longitudinal feed: 0.03 – 1.3 mm/rev Cross feed: 0.008 – 0.33 mm/rev 80 metric threads: 0.25 – 76 mm 96 Whitworth threads: ½” – 152 tpi 52 module threads: 0.25 – 22 module 88 diametral pitch threads: 1 – 176 DP Tailstock taper: MK 4 Drive power: 5.5 kW Dimensions (L x W x H): 4450 x 1300 x 1350 mm Weight: 2800 kg Ppedpfsxtu Erex Abhou Accessories / Special Features: • Quick-change tool post, brand "Multifix", size B • Hardened bedways • Bed stop Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Podpfx Aovibc Hjbhjpu Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system Ppedpjlhwr Rofx Abhou - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Ppjdoxyh Hvepfx Abhju Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min

Year of construction: 1955, condition: used, Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device Pedpfx Abed Enr Iehspu -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Psdpfx Aexnqzxobhjpu Includes operating instructions Translated with (free version)

Condition: good (used), Magnetic table 455 x 170 mm digital display water tank Honing device Wet sanding device Pjdpetu Il Tjfx Abhspu

Condition: used, greates pass round over bed 480 mm swing diameter over bed slide 300 mm turning length 1500 mm centre height 240 mm Pedstqqx Aepfx Abhepu centre distance 1500 mm spindle bore 42 mm spindle turning speed range 14 - 1400 U/min total power requirement kW weight of the machine ca. 2,4 t dimensions of machine L x W x H 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Pjdexpuu Eopfx Abhspu Spindle bore: 86 mm Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Space requirement approx.: 6000 x 2300 mm