Used Jaroma for sale (18)

Year of construction: 1978, condition: reconditioned (used), Thicknesser Jaroma DSMB 63 7.5 W lignum production Poland Jaroma - Technical Documentation TECHNICAL PARAMETERS: shaft width: 630 mm detail thickness: 240 mm 4 shaft knives: knife shaft diameter: 125 mm number of rotations of the knife shaft: 6000 rpm adjustable rollers in the lower tabletop: motor: 7.5 kW electric height adjustment: two types of feed speed: dimensions (length/width/height): 120/128/125 cm Tjdpfx Aisiq Dk Sjrsd weight: 1060 kg

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm – from above: - ejectors - geared infeed shaft - pressure roller - planing shaft - pressure roller Tedpfx Aezu Sgpsirjd - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Double-sided planer Jaroma, two-sided thicknesser DSRA - 40 Planing width: 40 cm 1 x bottom planing shaft with 4 knives, 5.5 kW (surface planer) 1 x top planing shaft with 4 knives, 5.5 kW (thicknesser) 7 upper feed rollers Todpfx Aisy Nlp Aorsd Maximum planing height: 170 mm Minimum workpiece length: 350 mm Power requirement: 15 kW Feed: 2 speeds Machine tested, ready for operation, in very good condition.

Condition: excellent (used), CATALOGUE NUMBER 7573 Technical specifications: - shaft width 640mm - number of knives 4 pcs - max. thickness of workpiece 270mm - from above: - pawls - toothed infeed shaft, pull-type - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, pull-type - from below: - adjustable rollers in the lower table, 2 pcs - motor 7.5kW - electric table lifting - lifting motor 0.75kW - 2 types of feed speed - feed motor 1.1kW - diameter of dust extraction port 160mm - dimensions L/W/H 1150x1240x1170mm - weight 1073kg ADVANTAGES - Polish production Tedpfsztw I Nex Aired - electric table lifting - DTR documentation - used thicknesser, very good condition Net price: 26900 PLN Net price: 6256 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: good (used), Jaroma Thicknesser Tjdpoztaktjfx Airjd Max. planing width: 530mm, Max. planing height: 200mm, 2 feed speeds, 3 conventional knives (wedge-type), Electric table adjustment (up-down). 2 rollers in the table. 7.5KW motor 130mm dust extraction port Machine ready for operation.

Condition: excellent (used), Catalog number 7303 TECHNICAL DATA - Shaft width 640mm - Number of knives 3 pcs - Max thickness of the workpiece 250mm From above: - Pawls - Toothed infeed shaft, pulling type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pulling type From below: - Adjustable rollers in the lower bed, 2 pcs - Motor 7.5kW - Electric bed lifting - Lifting motor 0.75kW Tsdozxg S Uspfx Airjd - 4 feed speed types - Feed motor 1.5kW - Diameter of the dust extraction nozzle 140mm - Dimensions L/W/H 1120x1250x1680mm - Weight 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Net price: 4628 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to larger fluctuations)

Condition: used, machine/vehicle number: 008579, Work shaft length: 100 mm Motor power: 5.9 KW Tilting shaft: yes Tedpszylwrsfx Airjd

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! Todpozf H R Rsfx Airsd The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Speed: 9,000 rpm Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected power: 5.9 kW EQUIPMENT Number of milling units: 1 Tilting spindle The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8579

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the terms and conditions apply. The absolute latest pick-up date is August 31, 2026! Tjdpfozf H Nyox Airjd TECHNICAL DETAILS Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW EQUIPMENT Tilting spindle Number of milling heads: 1 The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8578

Condition: good (used), For sale is a robust, industrial-grade single-sided planer (thicknesser) of the DSMB-63 type, manufactured by the legendary Polish company – JAROMA. This machine is an absolute classic in professional woodworking. It features a massive construction that dampens all vibrations, ensuring the highest precision in processing. ⚙️ DETAILED TECHNICAL SPECIFICATIONS: Working width (cutterhead width): 630 mm. Maximum thickness of the workpiece: from 240 mm to 250 mm. Main motor power: 5.5 kW. Type of planing cutterhead: 4-knife. Cutterhead diameter: 125 mm. Cutterhead speed: 6000 rpm, resulting in a perfectly smooth surface after processing. Feed speeds: The machine has four feed speed options: 7, 10, 14, and 20 m/min. Thickness adjustment: Equipped with a convenient, electric height adjustment for the table. Lower table: Equipped with adjustable roller supports, which facilitate smooth sliding, especially with wet or heavy wood. Machine weight: Stability is guaranteed by a substantial weight of approximately 1060 kg. 🛠️ GREATEST ADVANTAGES OF THE MACHINE: Todpfx Aijzp Aapsrsd Armored, Polish quality: The heavy casting and compact construction ensure that Jaroma machines are practically maintenance-free and last for decades. High performance: A planing width of 63 cm combined with a powerful motor (5.5 kW) allows for efficient processing of heavy lumber, wide panels, and beams. Precision: The large cutterhead diameter and high speed minimize the risk of splintering or tear-out in the wood. 📍 ADDITIONAL INFORMATION: The machine is of Polish origin (Jarociński Zakład Przemysłu Maszynowego Leśnictwa). Condition: Used, in full working order. The equipment can be viewed on-site.

Condition: good (used), Two-speed motor Spindle shank diameter: Ø30 mm Vertical spindle travel: 150 mm Maximum milling cutter diameter: Ø250 mm Spindle speeds: 3000 / 4000 / 6000 / 7800 rpm Tedpsz Aflhefx Airsd Motor power: 3.1 / 2.4 kW Table dimensions: 670 x 940 mm

Condition: excellent (used), CATALOGUE NUMBER 7914 TECHNICAL DATA - shaft width 640mm - number of knives 4 pcs - max thickness of the workpiece 250mm – from above: - pawls/ejectors - geared infeed shaft, pulling Todpfx Aszu R Hnsirsd - pressure roller - planing shaft - pressure roller - smooth outfeed shaft, pulling – from below: - adjustable rollers in the lower bed 2 pcs - motor 7.5kW - electric bed lifting - lifting motor 1.1kW - 2 feed speed settings - feed motor 1.3kW - dimensions L/W/H 1130x1300x1200mm - weight 1026kg ADVANTAGES – manufactured by the Polish brand JAROMA – electric bed lifting – DTR documentation – used thickness planer, very good condition Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number: 8102 TECHNICAL DATA - Shaft width: 510mm - Noise-reducing comb - Number of knives: 4 pcs - Table length: 2950mm - Cast iron tables - Both tables adjustable - Original, angle-adjustable fence - Motor: 5.5kW - Diameter of dust extraction port: 140mm - Dimensions (L/W/H): 2950x950x1300mm - Weight: approx. 1300kg ADVANTAGES – Polish production Tedezzqn Sepfx Aired – Upper control panel – 4-knife shaft – DTR documentation – Used thicknesser – Very good condition Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalog number 7835 TECHNICAL DATA - Shaft width 410mm - Silencer comb - Number of knives 4 pcs - Bed length 2500mm - Cast iron beds - Both beds are adjustable - Original adjustable guide with angle adjustment - Motor 4kW - Electric brake - Diameter of dust extraction nozzle 125mm - Dimensions L/W/H 2500x820x1210mm - Weight 910kg ADVANTAGES – Polish production – Upper control panel Todpfx Aijztzkbjrjd – 4-knife shaft – Used thicknesser – Very good condition Net price: 15900 PLN Net price: 3700 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalog number 7757 TECHNICAL DATA Milling machine - spindle diameter 25mm - spindle height 120mm - interchangeable, tilting spindle (20 degrees) - spindle locking - adjustable up/down - original guide - table dimensions 1120x750mm - 4 speed settings - motor 3.8Kw Tsdpszr I E Aefx Airsd Circular saw - max. blade diameter 350mm - spindle diameter 30mm - blade adjustable up/down and at an angle - spindle lock - cutting width with guide 540mm - cast iron table - dimensions (L/W/H) 1260x900x1000mm - weight 610kg ADVANTAGES – Polish production – DTR documentation – used milling machine, very good condition Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7729 TECHNICAL DATA Equipment: - tape applicator Tsdpfxszw Damj Airod - glue tank (granulate) - tape feeder - guillotine – preliminary edge trimming - 2 pressure rollers - minimum width of workpieces: 50 mm - thickness of workpieces: 10-40 mm - minimum inner radius: 50 mm - gluing at an angle with a 1 mm thick edge, 0-45° - edge thickness: 0.3-3 mm - electric feed - total power: 2 kW - compressed air pressure: 6-7 bar - dimensions (L/W/H): 1700x1300x1550 mm - weight: 310 kg ADVANTAGES - Made in Poland - Unpainted - DTR documentation - Very good condition – used edge banding machine Net price: 6500 PLN Net price: 1512 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number: 8053 TECHNICAL DATA - Shaft width: 410mm - Noise-reducing comb - Number of knives: 4 pcs Tjdpfx Aoztzknoirod - Bed length: 2000mm - Cast iron beds - Both beds are adjustable - Original adjustable guide rail with angle adjustment - Motor: 4kW - Dimensions (L/W/H): 2000x900x1300mm - Weight: 610kg ADVANTAGES – Made in Poland – Upper control panel – 4-knife shaft – Used thickness planer – Very good condition Net price: 6900 PLN Net price: 1605 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 4 kW (5.44 HP), Spindle 25mm Tjdpfjqwgvdjx Airjd Interchangeable spindle Overhead control panel 4 speeds 2800-4000-5000-8000 4kw motor