Decanter

Hiller DecaPress DP45N-422 VA-HY Container

Year of construction: 2001, condition: excellent (used), Westfalia decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of manufacture: 1978 Godped Rwwxjfx Ah Djuk bowl speed: 3.300 rpm Commissioning until: 2004 Field of application: In the production of base oils for the removal of solid particles. Decanters were taken out of operation after a production changeover in 2004 and is therefore fully functional.

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Gjdpfx Ahoppyhte Deuk Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Year of construction: 2002, condition: used, Plant: Used decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Decapress Machine No.: 2884 Year of construction: 2002 Maximum drum speed: 3800 I/min Inner diameter of bowl: approx. 450 mm Gsdpfx Asppt Sfeh Douk Drum material: HII/St52 Electric motor: 30 kW Total mass: approx. 3650 kg Purchase and rent possible.

Condition: used, Year of construction: 2018, System: Decanter Type: Flottweg C4E-4/454 Complete dewatering system in container Year of construction: 2018 Sludge throughput: approx. 0-40m3/h Solids capacity: max. 1.2 TS/h Equipment: front double door, side entrance door, fan heater, lighting, sockets, etc. Rotor: max. speed 3650 min-1 Drum diameter: 470 mm System: Container system Interchangeable bridge system for accommodating the downstream system components. Piped and wired ready for operation as a functioning unit. Container system design: Stand construction, clad with sandwich panels and holders for transportation with interchangeable bridge systems. Guedpju R Icmefx Ah Dek Accessories: FHM preparation station PolyMix 4000SP, measuring equipment, switchgear Feed pump: Seepex BN 52-6LS Discharge conveyor: SS D320 double trough spiral conveyor Dimensions: L 7820mm x W 2500 mm x H 3880 mm Empty weight: 14500 kg Weight in operation: 15000kg Voltage: 400V Power consumption: 142 A Power consumption max.: 70kW Fuse protection: 250 A Frequency: 50 Hz Sludge inlet: DN 100 Centrate drain: DN200 Solids discharge: Spiral conveyor Further information: see photos

Year of construction: 1986, condition: refurbished (used), Chamber filter press, cpl. General overhaul in stainless steel lining, 82 filter plates in PP (food safe), 30 mm cake thickness, press capacity approx. 1100 litres, filter area 96 m2, fitted new filter cloths, max. 15 bar feed pressure possible, closed outlet via 2 diagonal corner holes, automatic plate transport and filter cloth washing system in stainless steel , high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with base for raising (stainless steel), control cabinet Gedpfx Ahen Dw Nks Djuk

Condition: excellent (used), Year of construction: 1980, Westfalia Separator SA 40, used in beverage industry, in excellent condition. Gujdoq U Dbpepfx Ah Dok

Condition: used, operating hours: 4,000 h, Used Line for olive oil production PIERALISI 700 kg/h Overview of the Line The Used Line for olive oil production PIERALISI 700 kg/h offers a complete and professional solution for the transformation of olives into extra virgin olive oil. Manufactured in 2014, this processing line includes exclusively PIERALISI machines, a benchmark brand in the olive oil sector. With a rated capacity of 700 kg/h, the system suits medium-sized producers who require durability, consistent performance, and high processing quality. Consequently, it provides an ideal balance between efficiency and compact footprint. Furthermore, it adapts well to various operational contexts. Machine Condition and Materials The seller has completely overhauled and repainted all machines in the line. As a result, the system is in excellent working condition. It includes full electrical and mechanical safety protections, which ensures compliance with modern standards. The manual control panel operates in perfect condition and comes with updated PDF wiring diagrams. In addition, all surfaces that come into contact with the product are made of AISI 304 stainless steel, which guarantees food-grade quality and long-term resistance to corrosion. Thus, the line ensures hygienic and durable operation. Initial Processing Phase Guodpfx Ajwqxhush Dek The process begins with a receiving tank PIERALISI EFFE 3, where the olives enter the line. Immediately after, a feeding pump PIERALISI 2 Cv transfers the product from the tank to the crusher. This pump, which has a new stator, operates in like-new condition and is paired with a 140-liter stainless steel tank. Moreover, the pump design supports stable and continuous flow. It feeds the olives into the crusher PIERALISI EFFE 3, which features a twin-screw system with cycloidal gears. Therefore, it ensures efficient and uniform paste production. In this way, it prepares the raw material for malaxing. Malaxing and Pasta Handling After crushing, the olive paste proceeds to the malaxer PIERALISI with a 2-ton capacity. If required, the operator can divide the malaxer into two separate vessels, each with an independent outlet. This option allows more control over the feeding process to the decanter. Additionally, it improves flexibility in handling various olive batches. For this reason, the malaxing stage becomes highly adaptable. Meanwhile, it maintains optimal mixing conditions for oil extraction. As such, the line supports both continuous and batch workflows. Separation and Oil Extraction The PIERALISI EFFE 3 decanter centrifuge forms the core of the Used Line for olive oil production PIERALISI 700 kg/h. This unit automatically separates the solid pomace from the liquid phase and supports a capacity of 700 kg/h. Importantly, it operates in both two-phase and three-phase modes, depending on the processing goals. Subsequently, the separator PIERALISI P1500/2000 (10 Hp) performs the final clarification step.

Condition: used, Used Line for Oil Production ALFALAVAL up to 1500 kg/h The continuous cycle olive mill operates as a complete system, producing oil with a capacity of up to 1500 kg/h. Moreover, each component features high-quality materials, primarily stainless steel, ensuring durability and compliance with hygiene regulations. Loading and Washing System To begin with, the bin tipper feeds olives onto a conveyor belt, maintaining a continuous and consistent flow toward the washing phase. Subsequently, the washer with leaf remover separates leaves and impurities effectively. In addition, the stainless steel Alfa Laval washer with an integrated cyclone cleans the olives thoroughly. Meanwhile, a hopper and screw feeder deliver the olives to the crusher, preserving their quality through stainless steel construction. Crushing and Paste Transfer After washing, the stainless steel hammer crusher Rapanelli, mounted on a steel frame, crushes olives uniformly at a capacity of 25 q/h. Then, a pump transfers the paste to the malaxers, which play a crucial role in the process. Furthermore, six stainless steel tanks, each holding 600 liters, malax the paste. As a result, pneumatic valves control loading and unloading, while inspection windows provide a clear view of the process. Notably, anti-condensation doors, coded green for loading and red for unloading, enhance functionality. Decanter and Separation At this stage, the Alfa Laval decanter 716B-11G processes 12-15 q/h of paste. Consequently, the decanter separates oil and water into a stainless steel tank while a vibrating screen removes residues. Additionally, pumps handle the transfer of water and oil, and an 11-meter stainless steel screw conveyor moves the pomace through a hopper. Moreover, two Alfa Laval centrifugal separators (models 407-AGT and 507-AGT) refine the oil with high efficiency. Automation and Control On the automation side, the system relies on an electrical cabinet that automates and supervises operations. For this reason, a dedicated Touch Screen PC enables operators to monitor every phase of the process in real-time. Accordingly, this advanced control system minimizes manual intervention, ensuring precision and smooth operation. Gjdjvgu U Dopfx Ah Djuk Operating Conditions The Used Line for Oil Production ALFALAVAL is running smoothly for the current campaign. Furthermore, its modular design and durable materials ensure longevity and simplify maintenance. Meanwhile, stainless steel piping preserves the oil’s organoleptic properties and prevents contamination. In conclusion, the Used Line for Oil Production ALFALAVAL up to 1500 kg/h provides an efficient and complete technical solution for producing high-quality oil.

Year of construction: 2007, condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer:Hiller Model: Solid bowl screw centrifuge Type: DP51 Machine No.: H3991 Year of construction: 2007 Maximum permissible: Drum speed 3400 I/min Inner diameter of bowl: approx. 505 mm Reel material: ST52,0 drum wall thickness:13,0 mm Other: steel exchange case with reinforced bottom, Accessories: pump for sludge inlet, flocculant suction pump, flocculant discharge pump Flocculant station: 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer: galvanized steel Total mass: approx. 4200 kg Purchase and rent possible. Gujdpfsppucaox Ah Dok

Condition: used, machine/vehicle number: 11629, Rotor diameter: 450 mm Gjdsghgqajpfx Ah Deuk Rotor width: 800 mm 5 x 5 blade rotor (offset) 2 rows of stator blades Inlet cross-section approx. 600 x 800 mm Drive motor 55 kW With soundproof box, mobile