MILK ANALYSER LACTOSCAN S

Condition: excellent (used), Year of construction: 1980, overall weight: 32,000 kg, total width: 8,000 mm, total length: 6,000 mm, total height: 4,200 mm, sheet thickness (max.): 8 mm, Flanging and dishing machine BOLDRINI - PAO 165 / 4700 Max. workpiece 4700 Ø Isdpfx Abovcy Dcs Iea Maximum sheet thickness 8 mm

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) Iedsq U Sa Sepfx Ab Ija YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Year of construction: 1976, condition: defective spare-parts repository (used), manufacturer: Ahrens Year of manufacture: 1976 Model: 206 Z Technical data: sheet width: 1000mm sheet thickness: 0,7mm Profiling stations driven: 12 pieces shaft diameter: 55mm drive: 55kW infeed width: 1100mm distance between the stands: 650mm Dimensions of the individual components: roller table 1: 6.000 x 1.700 x 1.700 mm roller table 2: 6.000 x 1.700 x 1.700 mm Drive 1: 3,800 x 1,000 x 1,500 mm Drive 2: 6,300 x 1,000 x 1,500 mm reel: 3,000 x 1,300 x 1,600 mm shear: 1.700 x 650 x 1.000 mm Euro pallet: 1,200 x 800 x 1,200 mm For the whole machine 2 trucks are needed! Accessories/ special equipment: Decoiler Profile shear Remark: Iedpfx Aeg Ul S Dsb Iea The switch cabinet is missing. The machine is therefore not ready for operation.The machine is used as basic setup for roof trapezoidal profiles with high beading.

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid Iodjlc Dwvepfx Ab Ija 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics Ijdpfjuc Sw Asx Ab Iea 10. electrics

Condition: used, Year of construction: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Unit rated 9,3 kh/hour water evaporation capacity at 350°C maximum air inlet temperature. Drying tower has diameter approx. 1000 mm x 700 mm height of straight side x 1100 mm conical height. Includes (1) rotary atomiser CMT model AF07 driven by 0.7 kW IBAG motor, diameter of wheel 63 mm, speed range 10.000 - 60.000 rpm. Unit also includes 12 kW electrical air heater, cyclone, fan and main switchboard with integrated control panel. Ijdeuk Ehxepfx Ab Isa

Condition: good (used), functionality: fully functional, Used machine in very good condition, was in operation last year. Iedpfx Aovr E Edsb Isa

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, POLY-CLIP RCA ID.NO. 2708 Poly-Clip mod RCA automatic double clip machine handles calibers from 25 mm - 55 mm both natural casing & collagen casing. Pipe that comes with is 24 mm + associated brake. Isdpfx Astrf Egjb Ija Dimensions 100 x 80 cm Height 195 cm.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit Isdjr D N Eqepfx Ab Isa 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: good (used), Year of construction: 1994, CNC Spiral bending machine, capacity 50cm3, min-max diam of coil 500-3.500mm. Iodpfx Abeiu Acpj Ioa