Vibrating feeder

Hispano Suiza Vibrationsrinne

Condition: good (used), Year of construction: 1992, functionality: unexamined, overall weight: 18,000 kg, power: 250 kW (339.91 HP), For bulky waste, pallets, residual wood, etc. Single-shaft shredder with electrohydraulic drive Rotor width: 2500 mm Rjdoq I Rkdopfx Adbsbt Rotor diameter: approx. 500 mm Electric motor: 250 kW

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Redpeu R Rtbsfx Adbebt Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2000, condition: excellent (used), Neuman und Esser ICM 48/60 Classifier Mill, only the grinder without accessories, good condition. Additional we have a ICM 8 and a big ICM 1000 for sale Rsdpfxeh Ugwys Adbjbt

Condition: used, Year of construction: 1981, -1- used hard rock impact crusher, feed approx. 350 x 690, rotor 1000 x 670, capacity up to 40 t/h, with electric motor Rbsdpfx Aew N Hk Hodbst

Year of construction: 2023, condition: ready for operation (used), Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible. Rjdpfxet Iw Rys Adbjbt

Condition: used, Year of construction: 2017, Weima HWN-2-1000 chipper for shredding wood and similar materials such as plastics or cardboard. The machine features a robust design, a large feed hopper, and two powerful rotors for continuous material feeding. Optional new blades available at an additional cost. Rsdsxvzzxopfx Adbsbt rotor diameter: approx. 354 mm rotor length: 1.000 mm Number of knives: 2 x 72 drive power: 2 x 18.5 kW Dimensions: 2.4 x 2 x 2 m sieve size: 10 mm

Condition: good (used), functionality: fully functional, 2 Pcs. “Steinert NES 200 220 E 5009” for Sale Rsdpexb Tbzofx Adbobt Manufacturer: Steinert Type: NES 200 220 E 5009 Belt widthness: 2.000 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: excellent (used), Year of construction: 2014, IFE eddy current separators are used for separating non-ferrous metals (aluminium, copper, brass, etc.) from all types of bulk material. Rbedpfxjwxfqrs Adbet IFE eddy current separator, central system INP including discharge hood, feeder tray, support frame, and control unit. Working width: 2000 mm Rotational speed: 2500 rpm Main drive: 11 kW Conveyor drive: 2.2 kW Weight approx. 3200 kg Dimensions incl. discharge hood: L = 4300 mm W = 2900 mm incl. main drive H = 1250 mm incl. discharge hood IFE feeder tray, type: UE-1900x2000 F-2LM865T Working length = 2000 mm Working width = 1900 mm 2x vibration motors Dimensions LxWxH 2230 x 2200 x 1900 mm Weight approx. 1300 kg Support frame made of steel girders, platforms, stairs, discharge plate. Very well-maintained control cabinet with control system available. Machine available immediately.

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, product height (max.): 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Rbsdpfx Adevla U Tjbet Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure 380 MPa max. continuous operating pressure 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Connection for external emergency stop circuit Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired 2.2 Options Included Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Condition: ready for operation (used), Effective width: 1500mm, screw diameter: 2x 500mm, motor power: 2x 3.5kW, outlet: 2x 800x800mm, length: 7000mm, conveying speed: 50m/min, with steel construction underframe, closed constructional design with bunker walking elevation, an inspection is possible, year of construction unknown, was overhauled in 2022. Rbjdpfx Aon Tpm Aedbst