Piston compressor

HoKuTech hoku113-90

Condition: used, Electric Motor WWE American Model !! Cgjdpfx Agoc Sqvvekjp Type WWE250-18-449T 460 60Hz 250 HP (PS) 1790 RPM 282A IP55

Condition: new, Year of construction: 2022, functionality: fully functional, Technical data = see data sheet PDF. Cgjdpeup Dz Iefx Agkjp

Condition: new, feed pressure 11 bar Cjdpfx Aevkizgjgkegp intake capacity 480 cm³ volume capacity 360 Receiver capacity 270 l / bar Number of cylinders 1 Stk. motor 400Volt / 3,0KW V / KW turning speeds 892 U/min weight of the machine ca. 200 kg. range L-W-H 1,6 x 0,7 x 1,2 mm

Condition: new, 4 St. 2 St. Codsxabbtopfx Agkogp Plate thickness 45 mm table length 2000 mm range L-W-H 2000 x 700 x 900 mm weight 152 ca. kg. Furnishing: - brand new workbench - Multiplex worktop 45 mm with surrounding edge - left: 3x drawers - right: 1x drawer, 1x door in COLOR: BLUE / GREEN OR GRAY available!

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Cedpotqfhxjfx Agkegp Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: new, welding current max. 300 A open-circuit voltage 55 - 76 V connected load frequency 400 V weight 150 kg Dimensions (LxWxH) 900 x 400 x 900 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m Cgjdpfevn U Erjx Agksp

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Cgedpfjua Tbwsx Agksp Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: new, length 1150 mm width 610 mm height over floor 910 mm table load capacity max. 450 Kg dimensions 1170 x 640 x 135 m weight 47 kg Total dimensions including back panel 115 x 61 x 140 cm. Internal dimensions of the top 2 drawers 44 x 40 x 9 cm. Inner dimensions of the lower drawer 92 x 40 x 9 cm. Lower shelf dimensions 115 x 65 cm. Dimensions of the tool board with holes for hooks 115 x 50 cm. LED fluorescent beam width 50 mm. Cjdpfx Ageu Imhvokogp Power of the LED fluorescent tube 9 watts. ( IP20 )

Condition: used, mileage: 41,389 km, power: 95 kW (129.16 HP), first registration: 04/2014, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2026, color: blue, gearing type: automatic, emission class: euro5, number of seats: 2, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Body/Conversion: Body/Build: L1 refrigerated box conversion, * Carrier XARIOS 300 refrigeration unit, * Standby cooling, * Dhollandia DHK 2.04 tail lift at rear cargo area, * 1 row of lashing rails, * Ceiling light in cargo area with door contact, Equipment: * Automatic transmission, * Air conditioning, * Comfort driver's air-suspension seat, heated, * Manually adjustable passenger seat, * Heat-insulating glazing, * Right sliding door with power close assist, * Rear doors (270° opening angle), * Metallic paint, * Tow bar rated to 2,000 kg with step; towing capacity up to 3,500 kg available at extra cost. Technology: * Audio system Audio 15 (radio with color display), * Becker MAP Pilot navigation system, * Reversing camera, * Bluetools hands-free system, * Outside temperature display, * Electrically adjustable and heated exterior mirrors, Safety/Environment: * Driver’s airbag, * Brake assist, * Braking system with ABS+ASR, * Hill start assist, * Reinforced front stabilizer, * Rear stabilizer, * Low-emission Euro 5 compliant, Miscellaneous: * First delivered in Germany, * 2 previous owners, * Engine: 2.1L – 95 kW CDI CAT (2143 cc), * Wheelbase: 3,250 mm, * Payload: 1,150 kg according to vehicle registration, * Perm. gross vehicle weight: 3.50 t, * Mercedes service history maintained, Since 1972, your reliable partner for automobiles/commercial vehicles in 28832 Achim near Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with special rates. If interested, we are happy to prepare an individual offer for you! Trade-in of your commercial vehicle or construction machine is welcome. If a fresh TÜV inspection is required, we can provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV certificate. Delivery of your “new” commercial vehicle is possible at additional cost via our external partners. Codpfx Aelap S Aegkegp The details in advertisements, online listings, price tags and images are non-binding descriptions and do not represent guaranteed features. The seller assumes no liability or warranty for typographical or data transmission errors. Listed equipment should be verified separately if necessary. Errors and prior sale reserved.

Condition: reconditioned (used), Sorting machine overhauled and ready for operation the price is depending on condition and equipment, software and hardware status 2008 - 2014 they like to come with material for trial sorting. the machines are for slag, shredder residue, residual fractions, cable, aluminum, Va, Ne about 12-120mm depending on the fraction 1-2 screen cuts should be made. Functionality induction and magnetizability, discharge with air approx. 3- 9 to throughput depending on material up to 40 to Cgjdpfx Agjt Rv Naokjp