Bale press

HSM 4809

Condition: excellent (used), Year of construction: 2016, bale weight: 480 kg, For sale: HSM HL 4809I baling press. Lsdpfjy T Iqdsx Ackeab

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 75,07,50,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Ljdpfxjic Rl De Ackjab Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Lodpfx Acovf E Avjkeab Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg Laedpfx Ajra Nrxscksb tying 4 x wire automatically

Year of construction: 2022, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 4,000mm (customizable) Angle in the bend freely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, ​​felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x30mm T-40 lugs - 300mm pitch 2-layer particularly laterally stable We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Lsdpoilg U Eefx Ackoab Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers -Load chute: covered Ljdpfx Aeb A Ii Sjckeab -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of manufacture: 1994 Maximum capacity: 25,000 kg/h Bale discharge dimensions: 77 cm x 52 cm Lasdpfx Acot Ucqfskob The press was in operation until the production line was shut down.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. Ledpfjtvat Tex Ackeab After refurbishment, this baler is sold with a 2-year warranty.

Condition: used, Year of construction: 2024, color: green, empty load weight: 4 kg, first registration: 06/2024, fuel type: gasoline, gearing type: mechanical, TITLE: USED OPEN-TOP HOOK-UP CONTAINER FOR BULKY WARE IN HARDOX, REAR OPENING WITH TWO FOLDING DOORS + MEC CRANE WITH PANTOGRAPH FEET AND 6-BLADE GRAPPLE WITH MECHANICAL ROTOR REF: 24-U-103 TYPE: bulky goods with crane NEW: no LID: no OPENING: rear with two folding doors OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 5.90 m CASE LENGTH: 4.70 m + 1.00 m crane space + 0.20 m beams CASE EXTERNAL WIDTH: 2.50 m CASE INTERNAL / EXTERNAL HEIGHT: 2.30 m / 2.50 mt MC: 25 Lsdpfev Hicisx Ackoab WEIGHT: 6020 kg BOTTOM: 5 mm WALL: 4 mm COLOUR: green CRANE DATA BRAND: MEC F1211.S2 SERIAL NUMBER: 50579088 EXTRACTIONS: 2The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles, mainly specialised in the waste sector. Specialised in trucks, trailers and hook-lift equipment. With a fleet of over 50 trucks and over 150 skip loaders, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the accuracy of the data entered with the sales staff.

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Ljdpfx Acsupyw Eekoab Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment