Used Ehps for sale (26)

Condition: defective spare-parts repository (used), Year of construction: 1993, machine/vehicle number: 208712, functionality: not functional, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, Folding press EHT EHPS 15-35 150 t | 3,550 mm | Year of manufacture 1993 | Cybelec DNC 880 | incl. tool package For sale is a robust hydraulic EHT folding press, type EHPS 15-35, manufactured in 1993. The folding press has a working length of 3,550 mm and a pressing force of 1,500 kN or approximately 150 t. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive package of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot be performed at the moment. The error needs to be bypassed or professionally repaired. After this error has been resolved, the machine should be operational again. Therefore, it is being sold explicitly as a used, repair-required industrial machine for restoration. The machine is in used condition, commensurate with its age. Signs of use, paint damage, and dirt are present; see pictures. Technical data: • Manufacturer: EHT Werkzeugmaschinen GmbH • Model / Type: EHPS 15-35 • Machine number: 208712 • Year of manufacture: 1993 • Pressing force: 1,500 kN / approx. 150 t • Working length: 3,550 mm • Control system: Cybelec DNC 880 • Oil quantity: 390 l • Power supply: 3~ • Frequency: 50 Hz • Operating voltage: 380 V • Control voltage: 220 / 24 V • Rated current: 50 A • Main fuse: 80 A • Electrical wiring diagram no.: 111002 Safety system: Nsdpfx Aajzd Sc As Uowk • System: Press safety system Starkstrom Gummersbach • Delay time: 66 ms • Delay distance: 9 mm • Safety distance: 105 mm Inspection / Collection: The machine is located in an industrial hall and can be inspected by appointment. Dismantling, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be offered if required. Sales note: No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been compiled to the best of our knowledge based on the nameplates and available information.

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 Nwedpjy D Sy Rjfx Aa Uok - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: good (used), Press brake Manufacturer: EHT Year of manufacture: 1995 Machine number: 210763 Type: EHPS 20-35 Press force: 200 t Control system: DNC 806 PS Bending length: 3,550 mm Distance between uprights: 3,050 mm Throat depth: 350 mm Stroke: 330 mm Back gauge: 5 to 1,000 mm Adjustability of the H-axis: 160 mm Condition: good Accessories: Lower tool (reversing die – installed) Nodpfxoy S U Efs Aa Uowk Main motor power: 18.5 kW Total power consumption: 25 kW Dimensions: 4,000 x 2,000 x 3,200 mm Weight: 17.7 t

Condition: used, Year of construction: 1971, total length: 3,000 mm, total width: 2,000 mm, total height: 3,000 mm, Weight: 10.000 kg - Year: 1971 - Documentation available: No - CE certificate present: No - Serial number: 20956 - Drive system: Teach-in - Press force [ton]: 150 Nwodpfx Aeybdknoa Uok - Max. working width [mm]: 3050 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Tools included: Yes - Transport dimensions: 3000mm x 2000mm x 3000mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1991, condition: ready for operation (used), Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible. Nwsdpfx Aaozkvk Do Uek

Condition: good (used), Year of construction: 1995, functionality: fully functional, Press force: 150 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC ModEva Pac Overhang: 350 mm Distance between table and ram: 430 mm Table width: 250 mm Stroke: 250 mm Total power requirement: 18.5 kW Machine weight, approx.: 16500 kg Space requirement, approx.: 4400x2100x3200 mm Equipment/accessories: - Control system upgrade at the end of 2018 - Electric back gauge, 1250 mm - 10-stage die shifting - Crowning - Tool holder EHT 26 mm - Axis control: Y1, Y2, X, R Njdpjzd S Thofx Aa Ujwk - Sheet metal support table - 4 manually adjustable stop fingers - Pneumatic upper tool clamping - Safety light curtain - 3 adjustable support arms - Oil cooler - 2-hand foot switch

Condition: used, Year of construction: 2004, total length: 4,600 mm, total width: 2,200 mm, total height: 3,000 mm, Weight: 21.500 kg Price: On request - Year: 2004 Nwodpfx Aajyvt Dzs Ujk - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 12.2235 - Drive system: CNC - Control system brand: Delem - Power [kW]: 33.5 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 300 - Max. working width [mm]: 4300 - Column gap [mm]: 3700 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 4600mm x 2200mm x 3000mm (l x w x h) - Transport weight [kg]: 21500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z Nedpfxotqmvzj Aa Uowk - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: excellent (used), Year of construction: 2004, power: 25 kW (33.99 HP), stroke length: 350 mm, operating speed: 10 mm/s, total length: 6,000 mm, total width: 2,000 mm, total height: 3,400 mm, overall weight: 22,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Delem DA 65W, working width: 4,300 mm, bending force (max.): 230 t, distance between stands: 3,700 mm, control type: CNC control, number of axes: 5, actuation type: hydraulic, Press brake DARLEY - EHP-LS 230 43/37 MACH-ID 9469 Nedpfx Aajyvh S Ts Uewk Make: DARLEY Type: EHP-LS 230 43/37 Control: Delem DA 65W Year: 2004 Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 230T Beam stroke: 350mm Table Width: 250mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: yes Hydraulic toolclamping: yes Power: 25kW Length: 6000mm Width: 2000mm Height: 3400mm Weight: 22500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, power: 15 kW (20.39 HP), operating speed: 10 mm/s, total length: 4,000 mm, total width: 2,000 mm, total height: 3,000 mm, overall weight: 11,500 kg, controller manufacturer: Delem DA65, working width: 3,100 mm, bending force (max.): 175 t, distance between stands: 2,550 mm, control type: CNC control, number of axes: 5, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 175T Beam stroke: 225mm Table Width: 150mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Nsdpjyvz H Refx Aa Uowk Control: yes Crowning: yes Hydraulic toolclamping: yes Power: 15kW Length: 4000mm Width: 2000mm Height: 3000mm Weight: 11500kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, operating hours: 17,446 h, power: 11 kW (14.96 HP), input voltage: 400 V, oil tank capacity: 130 l, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, overall weight: 8,900 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,100 mm, bending force (max.): 110 t, control type: CNC control, number of axes: 8, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Nodjx N Ibhepfx Aa Uewk Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: used, mileage: 3,98,700 km, power: 240 kW (326.31 HP), first registration: 05/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, * Mercedes Antos 2533 6x2 Heil Fronlader * Heil EHP 213134 * Waage Nwedoyulnnopfx Aa Ujk * Drucker * Radstand ca. 4,20 m * Euro 6 * Automatik Getriebe * Federung: Blatt/Luft/Luft * ABS * Liftachse * Lenkachse * Rundumlicht * Staubox * Rückfahrcamera * el. FH el. Spiegel, Spiegelheizung * Luftsitz * Differenzialsperre * Bluetooth * Radio * Reifen 315/70R22,5 ca. 40-40-40% * deutsches Fahrzeug * 1 Hand * * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * * WhatsApp

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical specifications: - Maximum working length 1250 mm - Distance between uprights 1050 mm - Maximum pressing force 80 t - Stroke 250 mm - Distance from upright to center of slide 300 mm - Maximum installation height between table and press beam 560 mm - Stroke speeds - Downward speed, no load, max. 100 mm/sec - Upward speed 100 mm/sec - Downward pressing speed max. 12 mm/sec - Total drive power 15 kW - Space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - including: - CNC control CYBELEC DNC 7400 PSGY - Controlled X-axis rear stop 5 – 1000 mm - Z-axis with three-stage pneumatic height adjustment - Manually adjustable and foldable stop fingers - Controlled pneumatic die shifting - Hydraulic tool clamping Njdeb Rk Ekepfx Aa Uewk - Manual crowning - 2 support arms - Point tool, split, H 320 x L 1000 mm - Deerfoot tool, H 320 mm x L 1000 mm - Universal die, L 1000 mm

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, controller model: Cybelec ModEva 12S, working width: 8,050 mm, bending force (max.): 320 t, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW Nedpjw Sttasfx Aa Uowk TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: good (used), Year of construction: 1994, functionality: fully functional, Used press brake by Darley Nodpoxq Dfvjfx Aa Ujwk Type EHP 50 20 15 Capacity 2050 x 50 tons Equipped with new Esa S630 control and Merlino lasersafe Includes set of tools

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, power: 26 kW (35.35 HP), pressing force: 230 t, stroke length: 470 mm, throat depth: 400 mm, clearance between the columns: 2,550 mm, total width: 3,750 mm, total height: 3,750 mm, overall weight: 16,200 kg, Equipment: CE marking, Hydraulic press brake Manufacturer: DARLEY, Type: EHP-LS 230.31/25 Year of manufacture: 2003 Technical data Manufacturer: DARLEY Type: EHP-LS 230.31/25 Year of manufacture: 2003 Capacity: 230 t Usable length: 3,100 mm Distance between uprights: 2,550 mm Stroke: 470 mm Installation height: 700 mm Upright overhang: 400 mm Motor power: 26 kW Oil tank capacity: 200 liters Weight: 16.3 t Dimensions: Width 3,750 mm x Depth 2,700 mm x Height 3,550 mm (plus 200 mm for the control arm) Equipment Njdpfx Aszmi Hqoa Uswk • Control system: Delem DA-66W • Automatic Wila/Trumpf tool clamping system + tool holders (top and bottom) • Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 • CNC-controlled crowning • Lazersafe safety light curtain (front) • Rear safety guard via door/grille • 2 adjustable support arms • • Tool set: Top tool: straight, H 158 mm, R3, 28°, 100 t/m, 3000 mm, segmented Top tool: slightly bent, H220 mm, R1, 86°, 2000 mm, segmented All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, mileage: 2,82,600 km, power: 240 kW (326.31 HP), first registration: 12/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, * Mercedes Antos 2533 6x2 Frontlader * Heil EHP 1787 * Waage Digi Sens + Drucker * Funkfernbedienung * hydr. Gabelverstellung * Radstand ca. 4,40 m * Euro 6 Nwsdpfxov Itcve Aa Uek * Automatic Getriebe * Klima * Federung: Blatt- Luft- Luft * Liftachse * Lenkachse * Ad- Blue * Staubox * Rückfahrcamera * Differenzialsperre * Multifunktionslenkrad * Radio - Bluetooth - CD * el. FH + el. Spiegel * Spiegelheizung * Reifen 315/70R22,5 ca. 60-30-40% * 1. Hand * deutsches Fahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp * ·

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Weight approx. 23,000kg Nwedpeuhf Tzjfx Aa Ujk The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: new, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,410 mm, loading space width: 2,346 mm, loading space height: 1,515 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 2,980 mm, Year of construction: 2026, Equipment: ABS, Wielton Strong Master Hardox steel tipper body with a 26 m³ loading volume HP tipper body Immediately available 30 Years Black Edition Overlapping oscillating tailgate with grain slide New vehicle, immediately available! Unladen weight approx. 5,940 kg Equipment: - SAF disc axles - Axle lift with control line - Automatic tilting lowering - JOST geared landing gears, full load - WABCO braking system - Semi-circular Hardox tipper body - Overlapping oscillating tailgate with lateral tension locks - Grain slide in the center + additional rotating locks - Double pendulum bearing and replaceable rubber seal - Floor 4 mm / side wall 3 mm - Roller cover with quick-release fastener Nwodpfx Aszctmhja Uek - Operating platform on the frame - Hyva 250 bar hydraulic cylinders - Tires 385/65 R22.5 Hankook TH31 - Aluminum rims ABERG - Rear lights, full LED Aspöck - 2x LED reversing lights - Tool box - Water tank - Shovel + broom - Aluminum ladder Subject to prior sale and errors in this offer. Only the agreements in the order confirmation or the purchase contract are binding. You will receive the exact scope of equipment and prices from our sales staff. Please contact us.

Year of construction: 2025, condition: new, New FERBERG mobile loading ramp from the manufacturer The FERBERG mobile ramp from the manufacturer is used in warehouses for loading and unloading containers and vehicles using forklifts, carts, etc. The loading dock ramp is a bridge between ground level and freight transport. Provides direct access for the loader to the vehicle body. Warranty 18 months. Having a CE Standard. Delivery throughout the country. Flexible system of discounts. Specifications: - Load capacity of mobile ramp – 8000, 12000, 16000 kg; - Total length – 9400, 11900, 13400 mm; - Carriageway width – 2000, 2500 mm; - Working height – 900-1750 mm; - Carriageway surface – zinc-coated anti-skid grating; - Height adjustment – using a hydraulic pump; - A special tow pole is used to move the truck loading ramp; - Color – grey. Complete set: - Mobile ramp – 1 pс; - Hand pump (made in Italy) – 1 pc; - Tow pole for transporting the ramp with a forklift – 1 pc; - Solid wheels – 2 pсs; - Rubber wheel chocks – 2 pсs; - Chains with carbine hooks – 2 pcs. Additional options: SL – Safety legs adjustable in height Njdpoqxrhcofx Aa Uewk HR – Protective removable handrails TC – Tent cover CLR – Another color EHP – Electric (220V) hydraulic power station with a control panel EHBP – Electric (12V) hydraulic station with a battery pack Find out more on our website. The photos shown are for illustrative purposes only. For detailed sales information, please contact the manufacturer.

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm Nwodpfx Aas Dqaqj Uok

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit Nedpfx Aogxnkcoa Uewk

Condition: used, Harmonic Drive planetary gearbox HPS-180-5-Di- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine Njdpfsyxg S Rsx Aa Uowk - fully functionalmanufacturer: Harmonic Drive type: HPS-180-5-Di spare part no.: 12171266

Condition: good (used), Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc. Nedpsgxnkkjfx Aa Ujwk

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos Nsdpfx Asgxnkvsa Ujwk -Dimension: 4050/45 / H130 mm -Weight: 147 kg