Hwacheon Sirius III

Hwacheon Sirius III

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible. Csdpfxev I U Iye Addoaa

Condition: good (used), Year of construction: 2002, machine/vehicle number: 120K587, Hello, For sale is a well-preserved Quaser MV204II universal CNC milling machine with HEIDENHAIN control at an unbeatable price-performance ratio The purchase price includes: tool changer, measuring probe, chip conveyor, coolant system, hydraulic system, documentation/machine documents, etc... Data machine dimensions Height: 2,825mm Width: 2,650mm Length: 2,200mm Weight: 7,500Kg Data travel paths X-axis travel: 1,020mm (feed speed 32,000mm/min) Y-axis travel: 600mm (feed speed 32,000mm/min) Z-axis travel: 560mm (feed speed 32,000mm/min) Caodpfopfawhsx Addoa Milling table data Milling table size: 635 x 1,200mm Milling table loading capacity: 1,000Kg Table configuration: 6 x 18mm H 8 T-slots Milling spindle data Max. spindle speed: 7,500 / 10,300 1/min Max. spindle torque: 252Nm All further data available on request by email!!! Viewing appointment possible. Best regards

Condition: used, Year of construction: 2016, x-travel 6.500 mm y-travel 4.250 mm z-travel 1.500 mm Control HEIDENHAIN iTNC 530 HSCI table-size 7500 x 3000 x 300 mm distance between columns 3.800 mm rapid travel x/y/z 30.000 mm/min tool taper HSK 100 number of spindle speeds 6.000 U/min/rpm transmission ratio 2 Motor output 37 kW Number of working hours 28.475 h Spindle hours 12.629 h Tools changer 60 fach/tools Caodpfx Adexb Ed Uedsa Internal cooling system 36 bar Chip coveyor Doppel milling head 5-Achs-Fräskopf OAD total power requirement 80 kWA weight of the machine ca. 85 t

Condition: good (used), Year of construction: 2000, Daewoo Puma 230, year of manufacture 2000, Fanuc 18 iT control, turning length 548 mm, turning diameter 350 mm, 10-position turret, tailed tailstock, three-jaw chuck Ø 254 mm, tool measuring arm, swarf conveyor, coolant system, main spindle newly mounted, flat guides, accessories, Cajdowx I Efjpfx Addja

Condition: excellent (used), grinding length: 3,500 mm, center width: 5,000 mm, Cylindrical grinding machine. Schehr Meuselwitz, model SAXW 1000. Weight: 33 tons. Centre distance: 5,000 mm. Grinding length: 4,000 mm. Concave and convex grinding direction. Total length: 9.6 meters, width: 3 meters, height: 2.4 meters. 380 Volt. The machine can be inspected under power at the seller's facility. Csdpowb Dq Nsfx Addjaa

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: Cedpfx Adsvwgm Hsdsaa - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Cajdet Hr Ahspfx Addea Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: good (used), Year of construction: 2015, Very good machine - precise and reliable... worked in 1 shift only (8- 10 hours per day) Codpfx Adev Acphsdeaa

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: Csdpfx Aouuz Iieddjaa - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: like new (used), Year of construction: 2012, operating hours: 6,589 h, functionality: fully functional, We are selling a beautiful POSMILL E1100 machining center, built in 2012. The machine has few spindle hours (6,589) and was used for single-part production. The machine is ready for demonstration with power at the delivery point. Technical specifications: X-axis 1,100 mm Y-axis 600 mm Z-axis 510 mm Spindle/table distance 120-630 mm Table dimensions 1,300 x 600 mm ITNC 530 control system - ITNC 530 control system - 35.1 tool measurement system - Workpiece measurement system with probe - Linear measuring system in all axes - Internal coolant supply for internal machining Casdpfx Aowkhy Tsddea - Various tools with holders - Chip conveyor - Filter system - Workshop trolley with holder - Vice