Hydraulic unit

Hydrapower Typ 6/24l/60/200 bar

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 10,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP) Gisdpfxjud N Hds Af Aot  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V Giodpfx Afsg Ufvbo Ajt 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: good (used), Various heavy-duty roller conveyors as casting or cooling lines, ready for immediate use Godpsd Tx Ahjfx Af Aoit

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Gjdpfx Afjttbd Ne Aeit

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm Giedofx Hv Hepfx Af Aot weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Aufspannplatte - Tisch einer Langhobelmaschine - Tischbreite/Aufspannbreite: 1845 Tischlaenge/Aufspannlaenge: 5505 mm 7 T-Nuten laengs fuer T-Nutensteine: M 30 T-Nutenabstaende zueinander: 263 mm Gesamtlaenge: 6230 mm Gijdpfxobn Amfj Af Aot Plattenhoehe insgesamt: 350 mm Gewicht: 11 t

Year of construction: 2009, condition: good (used), - Fully automatic - Package height max. (mm): 650 - Package height min. (mm) :15 - Package width max. (mm): 1250 - Package length min. (mm): 300 - infeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed conveyor (mm): approx. 2.000 x 1.300 x 900 Gsdpfopu Anmjx Af Aoit - Outfeed table - Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 - Total connected load (kW): approx. 5

Condition: refurbished (used), functionality: fully functional, Extrusion Screen Changers - Continuous Screen Changers Double Piston Filter Gijdeh Itl Sspfx Af Aot - - Immediately available, on request also with control, hydraulic unit. When making your request, please let us know your desired capacity and the material so that we can offer you the right filter.

Condition: like new (used), inline Foilsealer and Shrinking tunnel Make: Kallfass Gisdpfx Afjg D Nv Tj Ast Type: semi/automatic shrinking tunnel Modell: Mat 1606-KS1600uni Capacity: 10-15packs/min (depends on product) Frame: Steel Range: 1600(belt)x600mm (W x H) Dimensions: L x W x H = 4000 x 2050 x 1750mm Weight: 900Kg Electric: 380V+N+E, 65Kw Condition: As-is, working condition

Condition: refurbished (used), Year of construction: 2024, ### Discover our selection of robust and precise bed milling machines! Are you in search of a reliable bed milling machine that boosts your productivity? Experience unparalleled precision and performance with our new and refurbished bed milling machines. Our machines offer X-travel distances from 1500-5000mm and are available with Heidenhain or Siemens control. With Y and Z travel distances up to 1200mm, you have limitless possibilities. Some refurbished machines are in stock and quickly available! Discover our extensive special accessories, such as universal heads, tool changers, and more, to make your bed milling machine even more versatile. Whether for complex workpieces or challenging tasks, our machines always deliver the best results. Trust in our years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here is a selection of possible machine types, and we are happy to offer additional models or special machines upon request: TECHNICAL MAIN DATA: BFM Series including 15% BAFA subsidy and more! - X-travel: 1500-5000 mm - Y-travel: 1000 mm - Z-travel: 950 (opt. 1500) mm - Max. table load: 5000 kg - Spindle taper: 50 SK - Spindle speed: 3500 (5000 opt.) rpm - Spindle drive: 15/18.5 (22/26 opt) kW ACCESSORIES: Manual Universal Head, Siemens or Heidenhain Control, Linear scales in X-Y-Z axis, Chip Conveyor Screw execution front/rear, and more. Extensive SPECIAL ACCESSORIES available on request to make the machine even more productive. Currently available refurbished machines with warranty and BAFA subsidy, e.g.: - CORREA CF17D: HEIDENHAIN TNC-426, Travels (X/Y/Z): 2000 / 800 / 800 mm, manual milling head, and more. - CORREA CF25/25: HEIDENHAIN TNC-530, Travels (X/Y/Z): 2500 / 1000 / 1500 mm, automatic universal head UAD (all 0.1º) / 6,000 rpm, and more. - Additional models available on request Contact us now and explore the world of innovative bed milling technology! Gisdpfopwn Hhsx Af Ajt Our service for you: - Consultation and solution finding on-site - Organization of machine transport to your facility - Installation, assembly, commissioning, and ready-to-use handover - Financing and exploration of funding opportunities through KFW and BAFA, and more.