Multi-spindle machine

Index MS 32-6 Futtermaschine

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. Prsdpfxsiq Hxve Airec The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Year of construction: 1999, condition: excellent (used), 600 KG 10 BAR Podpjxy Ikbofx Airorc

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 873 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,450 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, empty load weight: 7,850 kg, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Prsdpfxsvgh U Rs Airjc Mast type: Duplex Technical condition: good Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Sideshift, 3rd valve, 4th valve, front working lights, heater, full cab, CE certificate, safety light,

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, Description – General: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical data: Control system: Fanuc 21i-T Swinging diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have a live tool. Hinged belt chip conveyor Spindle mount: GR. 5 Rotating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: - The machine was completely disassembled, cleaned, and repainted. - The main spindle was fitted with new bearings. - The guides and guide shoes in the X-axis and Z-axis were replaced. - The ball screw in the X-axis and Z-axis was replaced. - New unit for central lubrication and new hoses. - The hydraulic unit was inspected and serviced. The drive coupling between the motor and pump was replaced. - The cooling unit was inspected and serviced; the temperature difference controller was replaced. Pjdpfx Aijtpu Szorerc - The clamping cylinder was fitted with new bearings and seals. - The gearbox of the A-axis was fitted with new bearings, and the coupling between the motor and gearbox was replaced. - The electrical cabinet was cleaned. - The control panel was replaced. - New screen. - New internal lighting. - The turret was disassembled, wear parts were inspected, cleaned, and re-sealed. - The turret encoder and encoder wheel were cleaned. - The length measuring systems in the X-axis and Z-axis were disassembled and cleaned. - The springs of the pickup station were replaced. - The motors of the X-axis and Z-axis were checked for bearing damage. - The panes on the work door were replaced. - The chip conveyor was completely disassembled, fitted with new bearings, cleaned, and painted. - Various small parts on the machine were also replaced, of course. The product has been described by us with the utmost care. The description is non-binding and should be verified during an inspection.

Year of construction: 2004, condition: good (used), A used, well-maintained double miter cold circular sawing machine from KASTO, model: “KASTOdisc A10” - Fully automatic operation - Single cut - Hydraulic clamping cylinders - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter 350 mm Cutting range: Round 90°/45° 100/100 mm Pjdpfxskfvhke Airerc Square 90°/45° 100x100/100x100 mm Rectangle 90°/45° 170x100/130x100 Shortest remaining piece length in single cut at 90°: 30 mm Shortest remaining piece length in automatic operation at 90°: 260 mm Working height 950 mm Dimensions (W x D x H) 1530x1348x1890 mm Weight 980 kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 104440, Please provide us with your offer price. A total of 6 Emag machines are available (same type). Sales are only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, Prodpsyh Sc Nsfx Airec or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: like new (used), Kitagawa MR200 rotary table for a MAZAK machine. Mitsubishi HG-H104T-D48 motor. New, unused condition. The table was never used and was intended to be installed in a Mazak machine. Pedpfx Aisy H Ewnerorc

Condition: ready for operation (used), Year of construction: 2008, A Fanuc CNC drilling and machining center is available. Travel X/Y/Z: 700mm/400mm/330mm, distance from table to spindle nose: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, max. spindle speed: 10000rpm, spindle power: 26kW/5.5kW, torque: 35Nm/7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool stations: 21, tool interface: BBT30, positioning accuracy: 0.006mm, repeatability: 0.004mm, machine dimensions X/Y/Z: 2150mm/2050mm/2350mm, weight: approx. 2100kg, control: Fanuc 31i-B5, operating hours: approx. 9547h. Including chip conveyor and coolant tank. Documentation available. An on-site inspection is possible. Prodpfezlt Snex Airjc

Condition: not inspected (used), Year of construction: 2014, operating hours: 43,965 h, functionality: fully functional, power: 30 kW (40.79 HP), volume flow: 351 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Used Atlas Copco GA30VSD+FF compressor Integrated dryer Prjdpoxu Ibcefx Airjc Integrated frequency converter 30 kW 13 bar 5.85 m³/min Year of manufacture: 2014 Operating hours: 43965

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Pjdpfx Aiew Tfb Sjrsrc Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.