Gantry Cartesian Robot

isel Germany FB 2

Year of construction: 1983, condition: good (used), machine/vehicle number: 2103, max. bore of chuck: 1 - 20 Ø mm max. boring diameter: 20 mm mm cap washer diameter: 100 mm cap washer rotation: ca. 4500 Upm engine: 380 V, 0,25 kW Nodpfxodnfz Ne Adwsdd space needed: 600 x 450 x 1380 mm

Condition: excellent (used), Year of construction: 1989, wire diameter range: 1,8 - 5,0 mm ring diameter range: 80 - 600 mm wire feeding length: 0 - 10.000 mm Ndsdpfxof Tymbj Adwsd output: max. 30 rings/min welding capacity: 10 kVA

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. Nedpfx Adol Dw D Eswsdd This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Year of construction: 2022, condition: new, Thickness planer KD410 Nodpfxegx T Hhe Adwsdd Weight 205 kg Voltage: 400 V - 3 phases, power (S6) 4,4 kW / 6,6 PS chip and dust extraction diameter 100 mm Planing table dimensions 600 x 410 mm Maximum planing height 230 mm Shaft diameter 70 mm Number of knives: 3 Maximum thickness per pass: 4 mm Speed: 5500 rpm Speed 6 m / min. Accessories: - Handwheel with indicator for thickness planer - Planer cutterhead Tersa Location: Ex stock 54634 Bitburg - immediately available -

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 980 h, laser hours: 500 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,000 kg, power: 6 kW (8.16 HP), input voltage: 400 V, type of input current: three-phase, compressed air connection: 7 bar, overall weight: 8,000 kg, total length: 9,000 mm, total width: 2,500 mm, total height: 2,000 mm, working range: 3,000 mm, Equipment: cooling unit, Ex-Display machine, used just as presentation machine. Njdovlz Hwopfx Adwsdd Machine is under power, can be tested on our site.

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Standard Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 150-250 mm Platen daylight fixed/variable min.-ma. : 375-475 mm Wight on movable mold half. max. : 110 kg Ejector force/stroke max. : 30/60 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Nsdoumzntspfx Adwodd Working hours: 3829 Machine is like new!

Condition: used, Year of construction: 1995, machine/vehicle number: 102085, Vakuumpumpe / Vaccum Pump Rietschle VFT 140 (11)Baujahr / Year 1995 - Serial-No. 102085-1113 Enddruck / Pressure 100mbar Saugvermögen / Vaccum capacity 50HZ=140/60HZ=168 m3/h Capacity 1450 / 170 min Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Nedpfx Adeh Eg Tqewsdd Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2004, X-Axis 700 mm Nodpfx Ajumrpzedwodd Y-Axis 360 mm Z-Axis 270 mm Table size length 600 mm width 300 mm Number of tool pockets 21 Spindle taper BT-30 Max. spindle speed 10000 rpm Length x width x height 1828.8 × 1574.8 × 2209.8 Weight 1800.4 kg

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, feed length X-axis: 3,200 mm, feed length Y-axis: 1,600 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: Syntec, controller model: SYNTEC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Working area price; 2600x1300 € 48,500 Ndjdpfetty Ahex Adwjd CNC NESTING ROUTER MACHINE CNC Machining Center Year of manufacture: 2025 9Kw ATC spindle Tool changer magazine with 16 positions (depending on the model) Multi-drill (optional) 7x vertical drills 8x horizontal drills 1 grooving saw, X-axis 1 grooving saw, Y-axis Professional Pegasus software Working fields X-axis: 2,600-3,200-4,200-5,200-6,000mm Working field Y-axis: 1,300-1,600-2,100mm Working field Z-axis: 200mm Vacuum pump Becker VTLF2.250 5.5Kw Omron safety light curtain Central automatic grease lubrication Suction connection diameter Ø150-200mm Cad Cam - programming Pegasus Professional Programs of any format: Adobe Illustrator, DXF, ESP, PLT, TXT. Special nesting function

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Njdpfx Aov D A Imjdwodd Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. If you have any additional questions, we will be happy to answer them.