Unloader

Iveco AT190.40

Condition: new, power: 294 kW (399.73 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,470 mm, loading space length: 6,950 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, For vehicle inquiries, Mr. Seidel will be pleased to assist you (by phone). ----Iveco S-Way AT190S40/FP 4x2 Curtain-Side Body with Tail Lift ---- * Body: Böse * BODY DIMENSIONS: Internal length x width approx. 6,950 mm x 2,470 mm * Designed for 17 Euro pallets * Side access height approx. 2,100 mm * Continuous side panels * Full roof clearance when open ---- * Bär tail lift type BC 2000 S4 with a lifting capacity of 2,000 kg * Platform height: 2,210 mm ---- * Axle configuration 4x2, 2 axles, rear axle drive * Cabin version: AT MY * Steering: SX, left-hand drive * Emission standard Europe * Engine: 400 C9 Cursor 9, 400 hp, Euro VI * Transmission: TX-12M, 12-speed HiTroniX automated * Permissible gross vehicle weight: 18-20 t * Drive axle: SR, single reduction, single axle * Suspension: FP full air suspension * Brakes: DIS-DIS disc/disc * Usage: STD standard * Vehicle variant: CABINAT, standard chassis with cab * Vehicle set-up: ON * Wheelbase: 5,500 mm * Tyres: 315/70R22.5 * Mechanical roof hatch * Transparent sun visor, exterior mounted on cab roof * Cab plastic parts painted in cab colour * Additional diesel/water heater 4 kW * Bed with curtains * Airhorn behind bumper (compressed air) * On-board refrigerator * Lower bed raised, with safety net, continuous mattress; AT/AS: 3-piece mattress * Batteries: 225 Ah * Electrical pre-installation for tail lift operation (per VEHH standard) * Weight option: front axle 8,000 kg / rear axle 11,500 kg (technically possible: 13,000 kg) * Battery charging socket, clamps * Trailer coupling, Rockinger brand * Trailer version for operation with continuous braking system Fpsdpfxoxpp Exj Ah Djr * Rear axle ratio: i 2.85 * Rear crossmember, D-value: 130 kN * Trailer socket for 24 V operation, 15-pin * Trailer coupling, 40 mm, 130 kN * Edge protection at frame end * Warning beacon * Side marker lights * Audible reversing warning, switchable * White (IC 194) * Operating manuals (printed) * Tyre manufacturer: Goodyear 315/70 R22.5 * KMAX S GEN-2 (3PMSF) * Operating and maintenance manual (electronic) * Infotainment: 10" TFT display + integrated Driver Pal * Leather steering wheel * Fully automatic air-conditioning * Cab air suspension * Sunblind roller for side windows, driver and passenger sides * HI-Comfort driver's seat, multi-adjustable, air-suspended, integrated headrest and height-adjustable seat belt, lumbar support, 3-stage cooling/heating * Front LED headlights * LED rear lights * Fog lights incl. cornering/turning light * Electric parking brake * Axle load indicator in cluster * Lane Departure Warning System (LDWS) * Adaptive Cruise Control (ACC) * Electro-hydraulic power steering We will gladly provide you with a leasing or financing offer upon request. Mr. Seidel (phone) will be pleased to assist you. For further information, please visit our homepage. !!! Errors, changes, and prior sale excepted!!!

Year of construction: 2018, condition: used, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Fsdpfxohx R Dvo Ah Djpr Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

Condition: new, power: 294 kW (399.73 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,500 mm, loading space length: 7,310 mm, loading space height: 2,633 mm, Equipment: ABS, air conditioning, navigation system, soot filter, tail-lift, If you have any questions about the vehicle, please contact Mr. Seidel (tel. ). ----IVECO S-WAY AT190S40/P 4x2 box + tail lift ---- * Engine speed 2200 rpm * Standard oil dipstick and oil filler neck on the gearbox * Engine type plate * Steel rims * Standard reverse gears * Speed limiter 90 km/h * Manually operated cab tilting device * Halogen front headlights * Black decorative film on doors * Rear cab wall without windows * Fog lights * Front underrun protection for chassis with a total weight greater than 7,490 kg * First aid kit * Plastic bumpers * Black cab attachments * Unheated windshield * Electrically adjustable and heated exterior mirrors * Cab roof insulation, standard * Flat roof in white * Electronic immobilizer and 2nd vehicle key * Digital EC control device 4.1 * Static passenger seat Fpedpfx Asvuilgsh Djr * Air suspension on rear axle * Hi-TroniX 12TX 1810 TD * COC general operating permit * Wheel chocks, 2 pieces * Batteries horizontal on the frame * Standard signs for air tank * Generator 2160 watts (24 volts x 90 amps). Recommended for tail lift operation * Rear shock absorber * Vertical dry air filter * Temperate climate version * Standard version * 1-cyl. air compressor. 352 cc * Chassis frame in gray * VIN code digital * APU pressure release in atmosphere * Brake overall train standard * Air tank in steel design, number depends on suspension version and trailer version * Standard applications * Stabilizer VA * Exhaust tailpipe, to the left * VIN: Manufacturer index ZCF * Emissions standard EURO VI E * Frame overhang rear, 2793 mm * No rear underrun protection * AdBlue tank, 50 liters * Fuel pre-filter with separator, heated * Standard transmission mode * Optimized aerodynamics on the A-pillar * Preparation for toll system (OBU), includes antenna and wiring on the dashboard * ECO switch - switching from power to eco mode to optimize the total cost of ownership (TCO) through consumption-optimized engine and transmission tuning * VDI interface (Vehicle Data Interface) for telematics services (FMS), Version 4.0 * Gearbox software ECO-Roll (freewheel function) * Driving style analysis (DSE) * Adaptive cruise control (ACC) * Lane departure warning system (LDWS) * Warning triangle, design and dimensions according to ECE-27 directive * Hazard warning light * Electronic stability program (ESP) * Emergency braking assistant (AEBS) * Loading space dimensions: L 7,310mm W 2,500 H 2,633mm We can make you a leasing or financing offer on request. Mr. Seidel (Tel.  will be happy to assist you. You can find further information on our homepage. !!! Errors, changes and prior sale reserved!!!

Condition: new, mileage: 260 km, power: 294 kW (399.73 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,570 mm, Equipment: ABS, air conditioning, parking heater, tail-lift, If you have any questions about the vehicle, please contact Mr. Seidel (tel. ). ---- Iveco S-Way AT190S40/P flatbed/tarpaulin + tail lift---- * Body: Young flatbed/tarpaulin * Interior length: 7,280mm * Interior width: 2,480 mm * Interior height: 2,570 mm * Tail lift: DHOLLANDIA DHLM.20 (2,000kg)---- * Driver's cab: Active Time with flat roof long-distance transport * Air suspension rear axle Fjdpernmdtefx Ah Dspr * 12-speed HiTroniX automatic transmission * Cursor 9 engine with 400 hp * Wheelbase: 6,300mm * Fog lights * Immobilizer * Euro6 E * AdBlue tank: 50 liters * Diesel tank: 290 liters * Rear axle ratio: i = 3.36 * Frame overhang rear: 2,793mm * Adaptive cruise control (ACC) * ECO-Roll (freewheel function) * Electronic stability program (ESP) * Lane departure warning system (LDWS) * Emergency braking system (AEBS) * Tires: 315/70R22.5 * Electric pop-up roof * Sun visor * Raised bed at bottom * On-board refrigerator * Additional heating diesel/water 4KW * Trailer hitch 40mm, Rockinger * Axle load indicator in cluster * Hill holder * LED taillights * Driver's seat HI-Comfort, multi-adjustable, air-suspended, integrated headrest and integrated height-adjustable seat belt, lumbar support, with 3-stage cooling or heating function * Navigation * Fully automatic air conditioning * Leather steering wheel * Air-suspended driver's cab * Sun blind for side window, driver and front passenger We can provide you with a Leasing or financing offer. Mr. Seidel (Tel.  will be happy to assist you. You can find further information on our homepage. !!! Errors, changes and prior sale reserved!!!

Condition: used, mileage: 2,18,412 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 01/2010, loading space length: 3,440 mm, loading space width: 1,770 mm, loading space height: 1,920 mm, emission class: euro4, color: white, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, 3-seater, power steering, driver airbag, 6-speed manual gearbox, tachometer, power steering, electric windows, onboard computer, electric exterior mirrors, center armrest, tow hitch, Euro 4, rear wing doors, central locking with remote control, etc. Subject to error, prior sale, and typing mistakes. Sale only to commercial customers and for export. !!!! Ref.-1109 !!!! Key number 169 !!!!! SOLD WITHOUT MOT (roadworthiness certificate) !!!!! Fpsdpowik D Eofx Ah Dor

Condition: new, power: 294 kW (399.73 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, parking heater, tail-lift, For vehicle inquiries, please contact Mr. Seidel (tel. ). ----Iveco S-Way AD190S40/P Box Body + Tail Lift ---- * Steel rims * Standard reverse gears * 90 km/h speed limiter * Manually operated cab tilt mechanism * Halogen front headlights * Black decorative film on doors * Rear cab wall without windows * Fog lights * Front underrun protection for chassis with a total weight greater than 7,490 kg * First aid kit * Plastic bumpers * Black cab attachments * Electrically adjustable and heated exterior mirrors * Cab roof insulation, standard * Flat roof in white * Electronic immobilizer and second vehicle key * Digital 4.1 EC control unit * Static passenger seat * Air suspension on rear axle * Hi-TroniX 12TX 1810 TD * Wheel chocks, 2 pieces * Batteries mounted horizontally on the frame * 2160 watt generator (24 volts x 90 amps). Recommended for tail lift operation * Rear shock absorbers * Vertical dry air filter * Single-cylinder air compressor, 352 cc * Gray chassis frame * APU pressure release to atmosphere * Standard brake system * Steel air reservoirs, number depends on suspension and trailer version * Front stabilizer bar * Exhaust tailpipe, to the left * EURO VI E emissions standard * Rear frame overhang, 2793 mm * Rear underrun protection not included * AdBlue tank, 50 liters * Heated fuel pre-filter with separator * Standard transmission mode * Optimized aerodynamics on the A-pillar * Preparation for toll system (OBU), includes antenna and wiring on the dashboard, without receiver * ECO Switch - Switching from Power to Eco mode to optimize total cost Total Cost of Ownership (TCO) through fuel-efficient engine and transmission tuning * VDI (Vehicle Data Interface) for Telematics Services (FMS), Version 4.0 * ECO-Roll transmission software (freewheel function) * Driving Style Analysis (DSE) * Adaptive Cruise Control (ACC) * Lane Departure Warning (LDWS) * Warning triangle, design and dimensions according to ECE 27 Directive * Hazard warning lights * Electronic Stability Program (ESP) * Emergency Braking System (AEBS) * DRIVE T. 315/70R22.5 * Transparent sun visor, installed on the outside of the cab roof * With curtains on the bed * Horn behind the bumper (compressed air) * Ashtray in the center console * Reinforced parabolic spring on the front axle * Electrical preparation for tail lift operation according to VEHH standard * Front axle weight variant 8,000 kg /Rear axle 11,500 kg (technically possible 13,000 kg) * Reinforced rear torsion bar, 60 mm diameter * Battery disconnect switch in the cab, electrically switchable * 225 Ah batteries * Without jack * Battery charging socket, terminals * Rear axle ratio: i 3.08 * Trailer socket for 24-volt operation, 15-pin * Rockinger trailer coupling * Trailer version for trailer operation with continuous braking system * 390-liter aluminum fuel tank * End cross member, D-value: 130 kN * Trailer coupling, 40 mm, 130 kN * Edge protection at the end of the frame * Electrical connection for the body on the left side of the frame * Side marker lights * Reverse warning buzzer, can be switched off * Axle load indicator in the cluster * Hill holder for comfortable starting on inclines * LED taillights * Tire manufacturer: GOODYEAR Tires: 315/70 R22.5 KMAX S GEN-2 (3PMSF) - KMAX D GEN-2 * Fpjdowla Sdopfx Ah Djr

Condition: used, Year of construction: 2023, Warranty complete machine 2 years or max. 1,000 hours Adapter to EURO mount / basic implement 908HL-14A 400/70 R20 Agricultural tires Deluxe cab DAB+ radio incl. / Bluetooth + M Hydraulic vibration damping Fork carriage 1,300 mm with 1,220 / long ga Fpsdpfxot Id A Ae Ah Dor

Condition: new, Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Full Automatic or Semi-Automatic CNC bending and sawing machines Fpodpfxovl S Dgo Ah Der Pipe size from dia. 6.0-150.0mm CNC bending, Shrinking, Sawing machinery, customerzied design available New machine stocks for sale listing price is for 2.5inch pipe type60nc bending

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). Fedpfettagdex Ah Depr We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-230047, The FICEP Tipo G31 sheet metal processing center for the economical processing of sheet steel and flat steel in steel construction and the steel trade. The Ficep Tipo G31 LG can drill, center punch, thread, countersink, mark, mill, oxy-fuel cut and plasma cut flat steel or sheet metal with a maximum sheet width of 3,100 mm and a sheet length of 14,000 mm in a single system. The CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. 2 tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changes. The system is suitable for sheet sizes: Sheet width: minimum 200 mm, maximum 3100 mm; sheet length: minimum 2500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma source is available for plasma cutting. The system also has an oxyfuel cutting unit for thick material thicknesses. The drilling unit with a high torque and a spindle speed of up to 6,000 rpm is designed for drilling with carbide tools such as solid carbide drills, Nenok Multiplex interchangeable insert tools as well as for use with HSS coolant channel drills with a drilling diameter of 10 mm to 40 mm. Fjdorr Sqlopfx Ah Dspr The Ficep Tipo G31 machine is in very good condition and has only a few operating hours.