Band saw

JAESPA MSU-4

Condition: excellent (used), Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Projection/cutting width 405 mm Table size 615 x 615 mm With Ideal BS0/16 saw blade welding device with blade shears and grinding stone Angle-adjustable machine table Cutting speed 16 - 2200 m/min Very well maintained condition Pjdpfxsxx I H Te Ab Iord

Condition: used, Year of construction: 1973, machine/vehicle number: 20591, roll diameter:500 mm throat:1050 mm workpiece height:400 mm volt:400 V table-size:750 x 800 mm total power requirement:5,5 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:2,4 x 1,0 x 2,2 m Prodocxxr Eopfx Ab Iod stable cast stand construction, cutting speed adjustable via manual gearbox and variator, band tensioning device, tilting work table +/-40°, rear add. table, various saw band guides, grinding device, work light, foot pedal

Condition: good (used), roll diameter 420 mm throat 405 mm workpiece height 380 mm cutting speed 16 - 2200 m/min table surface area 615 x 615 mm saw band length 3450/3650x6-20x0,9 mm work height max. 955 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 470 kg Predpfx Abjxf Nahs Ijd dimensions of the machine ca. 1250 x 1000 x 2100 mm From a training workshop Good condition (!!) Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp

Condition: good (used), Year of construction: 1981, machine/vehicle number: 12236-81, Offer 24157 Technical data: - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm - Table size 600 x 600 mm - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min Prsdpfx Abetwbxns Ijd - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - IDEAL saw blade welding unit - lighting

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t Psdpewwwqhofx Ab Isrd dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: used, Vertical band saw JAESPA type MSU 4 make no. 724749 year of construction approx. 1980 roll diameter 420 mm throat 400 mm table size 610 x 610 mm cutting height 260 mm saw band length min. 3200 - max. 3400 mm saw band speed 10-1500 m/min. infinitely variable mains connection 400 Volt, 50 Hz - infinitely variable saw band speed via 2 gear steps and infinitely variable via belt drive - saw table tiltable - Saw blade butt welding machine IDEAL BS0-16 - saw blade shear Pjdpfx Asd Nbk Tob Iord - Grinding stone for grinding the weld seam space requirement L x W x H 1000 x 850 x 1850 mm weight 400 kg good condition

Condition: excellent (used), functionality: fully functional, Metal band saw with blade welding device. Drive motor with two speeds. Continuously adjustable. Prodpfowt Sgvex Ab Ied

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 2,030 kg, fuel type: diesel, tank capacity: 250 l, color: white, output current: 217 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 165 kW (224.34 HP), continuous power: 150 kW (203.94 HP), total length: 3,200 mm, total width: 1,050 mm, total height: 1,750 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 150 (150kW - 165kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 150R SZR - Maximum power - 165 kW / 200 kVA - Rated power - 150 kW / 188 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Genset condition - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - 6RT80-176DE-TURBO (British Series). Fuel Type - Diesel (Diesel) Combustion: - 33.0 liters per hour (at 75% of maximum power) - 24.0 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 9700 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳POWER: 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 274G 400V rated power - 150000 watts (150kW / 188kVA) Maximum 400V power (up to 15 minutes) - 165000 Watt (165kW / 200kVA) Rated power 230V - 50000 Watt 230V maximum power (up to 15 minutes) - 55000 watts Rated current (400V) - 217.0 A Current protection - C16, C32, main - 250A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Pedpfx Abjtp I Ipj Isrd Three-phase and single-phase sockets Fuel tank capacity - 250 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions - 105 x 320 x 175 cm Gross weight - 2030 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 100Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. Suppliers of components of our units are selected meticulously, we make sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: excellent (used), Vertical band saw JAESPA type MSU 4roller diameter 420 mmoutreach 400 mmtable size 615 x 615 mmcutting height 350 mmsaw blade length min. 3450 - max. 3640 mmsaw blade speed 20-2500 m/min. stepless mains connection 400 volt, 50 Hz - stepless saw band speed over 2 motor speeds, 2 gear stages and stepless belt drive - saw table swivelling - 2 gear stages - saw blade butt welding machine IDEAL BS 0-16- saw blade shear - grinding stone for grinding the weld seam space requirement L x W x H 1100 x 950 x 2000 mmWeight approx. 700 kgsehr good, immediately operational condition2 identical machines in stock Prodpfx Asd Tx D Ueb Iod

Condition: good (used), Year of construction: 1981, machine/vehicle number: 11790-81, Offer 23402 Prjdpfx Aeri R Azsb Iod Technical data: - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm - Table size 600 x 600 mm - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - IDEAL saw blade welding unit - lighting

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Prjdpfx Absd Spf Rj Iod Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries