Eccentric press

JINAOLAN ALP-25V

Condition: ready for operation (used), Used can manufacturing line for the production of 73 mm or 99 mm cans. Several compositions of machines are available. Consisting of: - Krupp Sdvt duplex slitter - Soudronic FBB400 welding machine - Soudronic inside powder coating system - Outside lacquering system - Frei curing oven - Metalbox 65d spin flanger - FMI A304 beader - FMC 652 seamer Njdpfevy Tyxex Abbewp

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Nwedeihf R Uepfx Abbjp Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION800-270 Baujahr: 2007 Njdjwf I Hiepfx Abbowp Schließkraft: 80 Tonnen Holmabstand 410 x 410 mm Einbauhöhe min. /max.: 500 mm Öffnungsweg: 350 mm Schnecken DN: 35 mm Max. Hubvolumen: 123 cm³ Spritzteilgewicht in PS: 118 g

Condition: used, Year of construction: 2020, functionality: unexamined, total height: 6,400 mm, total width: 4,500 mm, total length: 3,800 mm, operating speed: 110 mm/s, reverse speed: 180 mm/s, distance table to ram: 1,500 mm, We are offering here a new build of the machine shown. The machine was put into operation in 2020 and can be inspected by the customer. Technical data: Press force T 800 Opening force T 80 Motor power KW 55/75 + 55/75 Piston stroke 1000mm Rapid pre-fill speed mm/s 110 Working speed mm/s 6 Return speed mm/s 180 Guide diameter mm 250 Max pressure Bar 250 Useful table area mm 3,500 x 2,000 Lower table displacement mm 2000 Between columns mm 2,000 Open height mm 1500 Total front mm 3800 Total side mm 4500 Total height mm 6400 Weight kg 134,600 The MV-800E/NC-SINCRO press was specially developed for the adjustment and testing of molds, dies, and stamps. The 4 columns with 250 mm diameter made of C45E steel were specially manufactured for high stress. It features an optimized hydraulic system with a pressure of up to 250 bar, ensuring long service life and reliability. It meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE • A structure that withstands 600 T concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table surface: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders with 400 T each. • Single-stage hydraulic unit with automatic shutoff of pre-fill speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Equipped with digital potentiometers on the upper table for displacement control and an electronic synchronization system to compensate for off-center or unbalanced forces. • The press is equipped with a side pressure switch to regulate the most suitable pressure setting for each specific task. • Glycerin manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds of the main cylinder feed. • The press has a manual cycle and an automatic cycle (activated via a test button selector): Nwodpswlrv Uofx Abbep • The manual cycle allows the execution of all movements (step by step) of the press at slow speed. • The automatic cycle allows the press to perform a complete production cycle. • Electrical safety system for the upper table fall protection system. • Lower table with hydraulic removal and physical stops. • The machine features a control panel with a touchscreen display for entering operating and calibration data. • 2 optical barriers of 1,000 mm with safety level IV installed at the front and rear. • Electrical components from Siemens are manufactured according to applicable CE regulations and laws in protection class IP55. • Electrical and hydraulic functions are redundant and self-controlled. Includes an additional safety block and self-monitoring devices for operation and safety. Includes inspection and certification of correct operation and safety distance for light barriers. • Safety is ensured by a laser and area protection with light barriers of level IV.

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, pressing force: 315 t, table width: 1,600 mm, table length: 1,100 mm, overall weight: 40,000 kg, working height: 1,300 mm, stroke length: 700 mm, Equipment: safety light barrier, Press Müller ZE_315_16 315T A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE_315_16 315T Press Njdpfxev Hp Ace Abbowp A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1987, pressure 125 t Nedpfx Abet Hwuiebswp distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 2001, machine/vehicle number: Z 293 - 040, For sale: used Raster Zeulenroda GHP 400 H/K-08 with a nominal force of 2x2000kN. Total weight: 32 tons. Rated current: 80A. Year of manufacture: 2001. Available from 08/2025. Nwedpfxswzkgwo Abbsp

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: Z293-068, total height: 3,800 mm, total width: 4,000 mm, total length: 5,000 mm, table width: 1,500 mm, table length: 2,500 mm, RASTER ZEULENRODA GHP 400 H/K-08 Testing Press, Year of Manufacture 2004 TECHNICAL DATA & EQUIPMENT: Serial Number: Z293-068 Nwjdpfx Asw Rggwebbjp Operating Voltage: 400 V Frequency: 50 Hz Control Voltage: 230 V Connection: 240 kW Rated Current: 100 A Hydraulic Pressure: 320 bar Rated Force: 2 x 2000 kN Table Dimensions: 2500 x 1500 mm Reach of Manufacturer Hilma’s Consoles: 1600 mm Including CNC control, cooling unit, and filtration/extraction system REFERENCE NUMBER 138 DIMENSIONS & WEIGHT: 5000 x 4000 x 3800 mm 32,000 kg COLLECTION NOTES: The item will be available from October 2025. The pick-up date must be coordinated for a specific day between 20.10.2025 and 31.10.2025. FCA: 59759 Arnsberg (DE), loaded onto truck

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: Z293-068, overall weight: 32,000 kg, table width: 1,500 mm, table length: 2,500 mm, pressing force: 407 t, control type: CNC control, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By submitting a bid, you are obliged to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Table width: 1,500 mm Table length: 2,500 mm Hydraulic pressure: 320 bar Nominal force: 2 x 2,000 kN MACHINE DETAILS Electrical specifications Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Connection: 42 kW Rated current: 100 A Dimensions & Weight Dimensions: 5,000 x 4,000 x 3,800 mm Weight: 32,000 kg Nodexm R S Ispfx Abbswp EQUIPMENT CNC control Cooling unit Filter extraction HILMA console throat (1,600 mm)