Surface Grinding Machine

Jones & Shipman 540 P

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Nsdpfx Ahonxi Uuj Rekw Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Year of construction: 2026, condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - Numerous other variants and special designs on request. Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture Nodjf Sqfqopfx Ah Rskw - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Nkjdenxi R Uepfx Ah Row Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Nksdpfxsvca Ize Ah Rjw Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), grinding diameter 450 mm Nedpfx Aoxcblqeh Rokw grinding length 600 mm centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: used, functionality: fully functional, Grinding length: 973 mm Center height: 250 mm Maximum worktable tilt: +6° / -9° Centering center: MT5 Maximum grinding head travel: 100 mm Maximum grinding head tilt: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Nkjdpfx Aewhp Dnjh Rjw Maximum workpiece weight between centers: 400 kg Maximum internal grinding device grindable bore: 160 mm Machine weight: approx. 5,000 kg

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Nkodpfx Ahovb Hbfe Rjw

Condition: excellent (used), Year of construction: 1970, Model: AR 1000 - Year of manufacture: 1970 – 1991, geometrically overhauled - Condition: good to very good - Grinding diameter: max. 350 mm - Grinding length: 1000 mm - Plunge grinding length: 100 mm Nksdpfx Aoxfvyzoh Row - Centre height: 180 mm - Centre taper: 60 MK4 - Grinding wheel dimensions: max. 500 Ø x 300 Ø x 80 mm - Swivelling grinding head: +/- 45° - Dimensions: 3.2 x 1.7 x 1.6 m (LxWxH) - Space requirement: 4.13 x 2.02 x 1.6 m (LxWxH) - Weight: approx. 4,300 kg - Operating voltage: 380 V - Power: 7.5 kW (total 11.6 kW)

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required Nkedpfx Aox S Edljh Row - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: used, Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Nksdoxpufqopfx Ah Row Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T