Surface grinding machine

Jones and Shipman 540P Surface Grinder

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Cedpfxonxi Uuj Aa Njgt Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm Cgsdpfx Aasb N Eh Ho Net band speed: 15 - 940 m/min engine: 380 V, 4 kW space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Condition: excellent (used), Star SA-12 Swiss-Type Lathe Technical Specifications Rapid feed (X, Y, Z, ZB): 370 mm Maximum turning feed (X, Y, Z, ZB): 270 mm Smallest input unit (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive: Spindle drive Main spindle motor: 2.2 / 3.7 kW Main spindle indexing angle: 1° or 15° Main spindle bore: 20 mm Tool slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1970 / 2330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Pick-up spindle Codpfswi Ty Ajx Aa Nogt Max. clamping diameter: 13 mm Max. part length for forward ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8000 rpm Pick-up spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Power supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF OFFER Among other things: (list not exhaustive): STAR SA-12 Swiss-Type Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Loader Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: new, Center length ----- 1000 mm Center height ----- 230 mm Turning diameter ----- 460 mm Passage of main spindle ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 KW Weight ----- 1750 kg INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 attachments * Self-centering 3 chuck 250 mm * Independent 4 chuck 320 mm * chuck 350 mm Cjdpfx Aask Iug Ts Njgt * Fixed and moving grips * LED work light and cooling system * Electric brake (CE) * Foot brake * Box with various tools

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 Cgedpjtrf Smefx Aa Njt - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW Cedsvca Izspfx Aa Nsgt No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2001, x-travel 185 mm z-travel 360 mm b-travel 460 mm control Mazatrol 640 T Maximum swing diameter 550 mm Maximum turning diameter 280 mm workpiece weight max. 200 kg bar capacity 51 mm main spindle speed 35-6000 U/min milling head speed 25-4500 U/min rapid power traverse in X-and Z direction 30/33 m/min Rapid traverse B axis 30 m/min tool turret 12 Plätze weight of the machine ca. 4100 kg Capacity: Chuck size: 6 inches Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar capacity: 51 mm Csdpjyukf Sjfx Aa Njgt Distance between spindle nose and turret edge: 80–535 mm Main spindle: Speed: 35–6000 rpm Spindle bore: 61 mm Counter spindle: Speed: 35–6000 rpm Spindle bore: 52 mm Turret: Number of tools: 12 pieces Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling drill: 16 mm Milling tap: M12 End mills: 16 mm Milling spindle speed: 25–4,500 rpm Equipment/Accessories: Tool holders Tools Powered tools Turning tool holders Coolant system Chip conveyor Documentation

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Csdpfxjifn N Ns Aa Nsgt Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: excellent (used), Maximum machinable diameter above the bed: 575 mm Maximum machinable diameter above the slide: 525 mm Cgodpewlgdyofx Aa Nst Maximum machinable diameter above the small cross slide: 300 mm Distance between centers: 2000 mm Spindle passage diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum upper slide travel: 140 mm Maximum tailstock travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Condition: excellent (used), Year of construction: 2003, cutting diameter 128 mm saw band length / mm table height / mm Cedpoxbh Hfsfx Aa Negt