Used Lapping machines for sale (29)

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Ibjdpfxstxitvj Aabjc Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min OFFER SCOPE U.A: (list not exhaustive): Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Lapping wheel diameter 500 mm Inner diameter of dressing rings 230 mm Speed of lapping wheel 0-100 rpm Ibodpfxeg Smwho Aaboc Working pressure 0-400 kg MARCELS MASCHINEN CH

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Used CNC lapping machine Iodpfx Asxg Ncxjabjbc Make: MELCHIORRE S.r.l. Model: ELC Type: 1500 Year of manufacture: 2018 Serial No: 2780/08 Weight: 14,000 kg

Condition: used, Type Läppmaschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Iodpfewzmxpjx Aabsbc Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, Diameter 1.5 - 160 mm Stroke 400 mm Weight 800 kg Tools Ibedpfx Aewgm Saoabec

Condition: excellent (used), Year of construction: 2005, operating hours: 23,900 h, functionality: fully functional, machine/vehicle number: 503982, STAEHLI DLM-705 FLAT LAPPING MACHINE Country of origin: CH Dimensions: 3300x1970x2600 mm Net machine weight: 8000 kg TECHNICAL SPECIFICATIONS Outer diameter of lapping plates: 705 mm Number of satellites: 4-8 Distance between lapping plates: < 390 mm Programmable working pressure for parts to be machined: 0-200 daN Stop precision: 0.1 µm Programmable rotational speed for the lapping plates Flat honing and micro-finishing: 0-250, 300, 400, 600 min⁻¹ Iodjw Uc Hnopfx Aabjbc Central drive: 0-125, 220 min⁻¹ Machining accuracy: 0.1 µm Subject to errors or omissions; technical data is provided without guarantee.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Type: Peter Wolters AC500F Double-Sided Fine Grinding Machine Very clean and extensively refurbished AC500F. Iedpjxbucmsfx Aabebc Equipped with new Siemens PLC+HMI control as well as Siemens software. All bearings, seals, and bellows replaced with new components. All pneumatic and metering hoses are new. New hood with monitoring. This machine features a loading table and a medium lifting station. Full documentation available. Immediately available. Year of manufacture: 2001, overhauled 07/2025. Drives: 3 kW up to 300 RPM, 250 DaN, T15 gear motion. This machine comes with a warranty.

Condition: used, TECHNICAL DETAILS - Plate - External diameter : 750 [mm] - Internal diameter : 150 - Main motor rotation speed : 4 [kW] - Supply voltage : 380 [V] Ibodpsxb Em Nefx Aaboc - Total installed power : 3.6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1100 x 1700 [mm] - Machine height : 2000 [mm] - Machine weight : 1100 [kg] - Number of hours : 5160 [h]

Condition: used, Year of construction: 1969, Reishauer DS / zum läppen weight of the machine ca. 200 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Ibodpfog Si R Uox Aabjc +++++

Condition: good (used), Lapping machine HAHN & KOLB LHD 0 -Machine from a government institution -Lapping plate diameter 400mm -Max. workpiece height 120mm -Max. distance between the cast lapping plates 80mm -Speed range 40-80-160 rpm -Speed of drive motor 700-1400-2800 rpm -Total power 1.8 - 2.7Kw -Hand-operated facing device -Various lapping cages -Documentation -Original condition Dimensions: LxWxH 1.4x1.3x1.9 meters / weight 1600Kg Ibodpfxswqx Dce Aabsc Errors / input mistakes excepted

Condition: used, Year of construction: 1979, table diameter mm workpiece height mm number of wheels 2 total power requirement 11 kW weight of the machine ca. 4,2 t Ibedoub Al Uspfx Aaboc dimensions of the machine ca. m

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Disc rotation speed: 0–110 rpm Maximum drive power for discs: 2 kW Maximum upper disc load: 20 daN Disc diameter: Ø 450 mm Internal drive rotation speed: 0–115 rpm Maximum internal drive power: 0.5 kW Disc drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Motor type: smooth operating mid-position control motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical drive motor: Type: stepper motor Steps per second: 50 Torque: 1100 Nm Crown gear adjustment: Type: AC brake motor 2 positions Voltage: 380V / 50 Hz Rotation speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Worm gear reduction ratio (internal drive): Ratio: i = 1 : 30 Worm gear reduction ratio (lower system): Ratio: i = 1 : 15.5 Worm gear reduction ratio (upper system): Ratio: i = 1 : 15.5 Operating pressure: Air circuit: 6–7 bar Lapping fluid pump: Connection voltage: 380V 50Hz Rotation speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Control and measurement device: Measurement range: 6 (±3 to ±11000 mm) See details in Millitron user manual Inductive probe: Ibjdjw T Tpdopfx Aabsc Measurement range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, all technical data are provided without guarantee and subject to change or error.

Condition: used, Perfectly working grinding machine "станка 3Л722" Basic parameters Accuracy class A Maximum workpiece dimensions (length x width x height) 1250 x 400 x 400 Maximum dimensions on electromagnet 1250 x 400 x 280 Minimum dimensions on electromagnet 50 x 40 x 3 Distance from the spindle axis to the table mirror mm 210..625 Ibjdpfjqwzt Nox Aabsc Maximum product weight kg 600 Maximum weight on electromagnet 400 Machine work table Dimensions of table work surface (length x width) 1000 x 400 Table feed speed 3..35 Grinding head Dimensions of grinding wheel ПП450х80х203 Grinding wheel speed/min 1460 Maximum grinding speed m/s 34.4 Maximum diametrical feed, mm 430 Accelerated transverse disc feed m/min 1,2 Automatic cross feed for each table feed mm/rev 1..60 Maximum vertical disc feed, mm 415 ?? 0,002 ?? 0,2 Automatic vertical disc advance, mm 0,002..0,128 Vertical accelerated advance speed, m/min 0,2 Electrical equipment Number of motors 13 Disc spindle motor power, kW 11 Hydrostatic pump motor power 4 Hydrostation air heat exchanger motor power 0,09 Lubrication system pump power 0,25 If you have any further questions, we will be happy to answer them.

Condition: used, TECHNICAL DETAILS - Honing range : Ø 0,6 – 2,5 [mm] - Spindle speed : 2000 – 7000 [RPM] - Motor power : 100 [kw] Ibedpfx Aeug U D Hoabsc - Table dimensions : 100 x 100 [mm] - Honing oil container with pump : 12 [l] - Weight : 160 [kg] - Dimensions : 650 x 500 x 700 [mm] EQUIPMENT - Plate 2 positions - Fittings with floating frame

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm Isdpfelqac Sex Aabsbc the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: ready for operation (used), Year of construction: 1982, machine/vehicle number: 62876, TOS BU28 Center distance: 1000 mm Iodpfxewdm Ebo Aabobc With accessories, stones

Condition: used, Year of construction: 1976, table diameter mm workpiece height mm number of wheels 2 Ijdoub Aluepfx Aabobc total power requirement 11 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m

Condition: used, Honing machine DELAPENA SPEEDHONE EA Iodpfx Aaev R Hv Uobobc

Condition: used, Year of construction: 1974, table diameter mm Ibjdpfsub Alzsx Aabsc workpiece height mm number of wheels 2 total power requirement 8 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m

Condition: used, TECHNICAL DETAILS - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] - Part dimensions (full) : approx. 40 [mm] - Remaining work thickness : approx. 5 [mm] Iedpfx Aaoug U Dmobjbc EQUIPMENT - Same as on photos

Condition: used, Year of construction: 1975, table diameter mm workpiece height mm number of wheels 2 total power requirement 11 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Ibsdpfx Asub Al Ijabjc

Condition: used, TECHNICAL DETAILS - Spindle number : 1 - Honing range : Ø 1,5 - 50 [mm] - Honing stroke : 0 - 100 [mm] - Spindle speed : 150 - 2500 [Rpm] Ibsdpfx Asug U Dyjaboc - Dimensions : 1550 x 800 x 1450 [mm]

Condition: used, Year of construction: 1983, table diameter 1000 mm workpiece height 25 mm number of wheels 1 total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Iodjt Hw H Sspfx Aabjbc

Condition: used, TECHNICAL DETAILS - honing diameter : 1 - 12 [mm] - honing length : 40 [mm] - 2 honing heads - 1 control head - 1 deburring unit with multispindle head Isdpfx Aeug U Dtsabebc

Condition: used, TECHNICAL DETAILS Iodsug U Dgspfx Aabebc - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] - Part dimensions (full) : approx. 40 [mm] - Remaining work thickness : approx. 5 [mm] EQUIPMENT - same as on photos