Screw compressor

Kaeser SK 21

Condition: good (used), Year of construction: 2007, operating hours: 9,600 h, functionality: fully functional, Kaeser SK21 screw compressor from 2007 in excellently maintained condition. Maintenance kit (oil separator cartridge, replacement filter, air filter, and oil) is included. Maintenance records and compressor logbook are available. Blsdpfx Afox H Ulushec Power: 11 kW Pressure: 8 bar Load hours: approx. 9,600 h #8442

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Blodpfxow Nhavs Afhoc Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Condition: like new (used), Year of construction: 2021, operating hours: 620 h, functionality: fully functional, Kaeser Aircenter SM13-11 screw compressor (2021) Bsdpsxnnd Rofx Afholc Manufacturer: Kaeser Type: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Switch-on hours: 1356h Load hours: 606h Maintenance in 2825h Technical data Pressure 11 bar Effective delivery quantity 1.08 m³/min Nominal power drive motor 7.5 kW Protection class drive motor IP 54 Electrical supply 400 V / 3 Ph / 50 Hz Dimensions (WxDxH) 630x1200x1716 mm Weight 400 kg Compressed air tank 270 l Compressed air connection G 3/4 Sound pressure level 64 dB(A) Refrigeration dryer Power consumption 0.26 kW Pressure dew point 3 °C Pressure loss 0.2 bar Refrigerant R 134a Energy saving control Yes Electronic condensate drain Eco-Drain Electrical equipment EN 60204-1 Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m supply cable with 32A plug

Condition: good (used), Year of construction: 1999, Indoor crane, crane, electric wire rope hoist, hand trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Manufacturer: Steel, crane chassis with electric rope hoist -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Traction drive: FA-C 3728 133-1 -Travel speed: 5/20 m/min Blsdpotlzdqsfx Afhsc -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Number: 2 crane trolleys available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/piece

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg Bodpfxol Tuvde Afhslc

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Blodpfswkf Dvox Afhsc Corner Rounding Unit: yes Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 1994, The emergency power generator was rarely used; it was connected to the heating system, which is why it does not have a water cooler. There are a total of 2 units available; the price is for 1 unit. Blsdsxdc Ehopfx Afhec

Year of construction: 2016, condition: ready for operation (used), Opening dimensions: 550x300mm, tunnel length: 1150mm, connected load: 7kW, weight: 215kg, with conveyor belt and documentation. Blsdpfoiph Uvjx Afhjc

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Bjdjwuz Npspfx Afhslc

Condition: ready for operation (used), motor power 11kW working pressure 10bar Bjdpfx Ajnr Hhijfhjlc capacity 1,59m3/min