New 15 kW screw compressor dryer

KAESER SK 25 T

Condition: excellent (used), Year of construction: 2018, operating hours: 8,371 h, functionality: fully functional, Year of manufacture - 2018 Rated power - 15 kW Itedpfx Aew Nn Hpodwjb Maximum working overpressure - 8.0 bar Ambient temperature 3-45°C Built-in dryer 8371 hours under load 500 l tank

Condition: new, Filter cloths for all filter presses in all sizes and qualities, short delivery times, ask us Iodpeg Azmmsfx Adwstb Location is 58762 Altena

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Itsdpfx Aedrc Txjdweb Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Year of construction: 2020, condition: new, Available from stock Strip dimensions: 4420 x 34 x 1.1 mm Cutting capacity (square): 360 x 400 mm Cutting capacity (round): 360 mm bundled cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Motor power main drive: 3.75 kW Engine power hydraulic pump: 0.75 kW Motor power coolant pump: 0.125 kW Itsdpfoiryf Sox Adwsb table height: 755 mm Weight: 1680 kg Dimensions W x D x H: 2400 x 2120 x 1840 mm

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Iodpfx Asfm T Hbjdwjtb Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: good (used), power: 30 kW (40.79 HP), Year of construction: 2010, operating hours: 51,548 h, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, pressure (max.): 8 bar, rotational speed (max.): 2,945 rpm, machine/vehicle number: 100609.1, Equipment: type plate available, The Kaeser ASD 57 is an energy-efficient screw compressor designed for reliable compressed air supply in industrial applications and is characterized by its compact design and quiet operation. With advanced Sigma profile technology and intelligent control, it offers optimum performance and durability. Technical details: Item number: 100609.1 Serial number 1941 Year of manufacture: 2010 Nominal output: approx. 30 kW Ijdpfot Iwyuex Adwjtb Maximum operating pressure: 8 bar Engine speed: 2,945 1/min Condition: used (see pictures and type plate)

Condition: new, Year of construction: 2025, Brand new NC-controlled precision vertical slotting machine for efficient production of keyways. Menu-guided program control for slot depth, slot width, cutting depth, tool width, and number of finishing strokes. Optionally available with a rotary indexing table. Rotary table diameter Ø 320 mm – up to three CNC axes possible. Stroke range of the slotting ram: 0 to 200 mm. Table size: 280 x 500 mm. Clamping table bore: Ø 80 mm. Throat depth: 350 mm. Maximum workpiece height: 400 mm. Continuously variable ram speeds: 30 to 120 mm/min. Dimensions approx. 1.2 x 1.2 m x height 2.3 m. Itedpfxexdi D Do Adwsb Drive power: 2.2 kW. Weight approx. 2,200 kg.

Condition: new, Year of construction: 2025, Introducing the latest model of the CORMAK WL3000 industrial laser welder, which combines advanced FIBER technology with innovative design solutions, offering unparalleled precision and efficiency. This device is designed for welding various types of metals, which ensures the quality and repeatability of welds at the highest level. Thanks to the 3-in-1 function enabling welding, cutting and laser cleaning, the device is versatile and effective in many industries. Why choose CORMAK WL3000? The CORMAK WL2000 laser welding machine is the perfect solution for professionals looking for reliability, precision and efficiency. Its innovative design and advanced cooling system make it a future-proof device that can handle even the most demanding welding tasks. Pre-order now and take advantage of this unique offer! Key Features and Benefits Itjdokkbw Ujpfx Adweb Advanced cooling system : A new, more efficient water cooling system ensures optimal operating temperatures, allowing you to work longer without interruption and increasing the lifespan of your device. Innovative design : The ergonomic and lightweight design of the welding head allows for welding even in hard-to-reach places. Thanks to the adjustable spot size (0-5 mm) and replaceable nozzles, the operator has full control over the welding process. Easy to use - thanks to the solutions used and the well-thought-out design, the operator can start working after a short training Low indirect radiation, just wear protective glasses to filter strong light when working Much faster welding than traditional methods, productivity can increase by 3 to 10 times Concentrated beam: slight change in structure due to small heat-affected area, Repeatability of welds, the weld seam is nice, the welds are of high strength. Very thin materials such as 0.5 mm stainless steel can be welded. Welding option with or without wire. The integrated laser cleaning function increases the range of applications of the device. Possibility of using the cutting option - ensures excellent cutting quality, without mechanical processing. Technical parameters Maximum power 3000 W Laser wavelength 1070nm Fiber optic length 10m Working modes Continuous / Modulated Air pressure 10 - 15 L/min Welding speed 0-215mm/s Automatic wire feeder Ø 0.8 - 2.0 mm Maximum power consumption ≤11.0kW Focal length 150mm Cooling system water Operating voltage 400V Shielding gas consumption 20L/min Dimensions 600x1100x1100mm Weight approx. 207 kg

Year of construction: 2012, condition: excellent (used), Used modern, very clean & fully serviced Bystronic Xact 160 3metre x 160ton cnc pressbrake for sale: Model: Xact 160 Make: Bystronic Xact Smart 160 Year 2012 Cybelec 880S cnc control Working length mm: 3100mm / 3metre Max. press force kN: 1600 / 160ton 2 axis back gauge – R and X axis 4 axis in total Max.stroke mm: 200 Rapid approach mm/s: 100 Working speed mm/s: 1-10 Return speed mm/s:95 Itedsn E Tryspfx Adwsb With crowning Weight kg 9800 Machine will come with tooling

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, operating hours: 39,500 h, laser power: 5,000 W, TRUMPF TruLaser 5030 – 5 kW Classic TECHNICAL DATA: Manufacturer: TRUMPF Model: TruLaser 5030 – 5 kW Classic Year of manufacture: 2009 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 5,000 Watt Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 12 mm Operating hours: 39,500 h STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit - Laser unit: CO2 laser TruFlow 5000, high-frequency excited, maintenance-free turboradial blower, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: Gantry drive combined with linear direct drives - Quick-change cutting head system - PlasmaLine - Fast processing with SprintLas for all sheet thicknesses - ContourLine for production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Automatic sheet edge detection - ControlLine capacitive height control and process regulation - Positioning laser diode - Automatic focus position adjustment (FocusLine) - Automatic nozzle cleaning - PierceLine - NitroLine high-pressure cutting - Laser power control - Automatic shutdown - Work area lighting Itodpfjw Rytqex Adweb - SIN 840D control: PC-based open control, user-friendly operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Shop floor programming - Safety: Multi-beam light barriers, fully enclosed beam guidance with nitrogen purging, monitoring system, multi-chamber extraction and compact dust collector, protective cabin - Network connection: RJ-45 network port via teleservice installation - 3.5" floppy disk drive - TFT color monitor - Electrical equipment for 400 V / 50 Hz three-phase current - Finish: Textured white RAL 9002 / gentian blue RAL 5010 ADDITIONAL EQUIPMENT: - Additional laser cutting head with 9-inch lens OTHER: - The machine underwent a technical overhaul in 2021