Metal circular saw

KALTENBACH KKS 400

Condition: good (used), Year of construction: 2000, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm Dujdpfx Aox Sdpyeg Rol -Total weight: 1190 kg

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm Duedpfxjd N H A Nj Ag Rjl - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Dusdpswp Ipxefx Ag Rel

Condition: good (used), Year of construction: 1980, functionality: fully functional, Good working kaltenbach saw machine Gearbox has been overhauled Safety hood mounted Machine has been overhauled Dsdsumb E Espfx Ag Reul Installation and trade-in possible If interested, please call! Kenta Industrial Tools and Service Ambachtsstraat 3 7951 ZA Staphorst

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t Dusdpfxjd N Sm Do Ag Rjl +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1987, Saw blade Ø: 400 mm Dsdpfxsx Ir Rws Ag Reul Cutting range round: 130 mm Rectangular: 305 x 40 mm Mitre cut at 45° round: 130 mm Rectangular: 245 x 40 mm 2 cutting speeds via pole-switchable motor: 9 and 18 m/min Feed rate hydraulically steplessly adjustable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

Year of construction: 1980, condition: used, Circular saw with miter cut Make KALTENBACH Type:KKS 400 M Year.ca.1980 Hydr.feed infinitely variable. Dsdpjixumvefx Ag Rsul Saw blade: 400mm

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30 - 34 m/sec total power requirement 4 kW weight of the machine ca. 100 Kg Dujdpfxsirwwpj Ag Rsl dimensions of the machine ca. 1,2 x 0,5 x 0,85 m

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1500 01025, saw blade diameter: 400 mm, total height: 1,700 mm, total width: 1,100 mm, overall weight: 700 kg, type of input current: three-phase, cutting diameter: 130 mm, space requirement height: 2,000 mm, space requirement length: 900 mm, space requirement width: 1,200 mm, length stop: 6,000 mm, Kaltenbach KKS400E cold circular saw, year of manufacture approx. 1980–1982, fully functional, can be inspected under power. Incl. outfeed roller conveyor with 6000 mm length measuring device. Cutting range at 90°: D130 or 120x120 mm, flat material 315x40 mm. Duedpfx Agswx Nn Io Rel

Condition: used, 1 used cold sawing machine KALTENBACH KKS 400 Dodpjq Ukvxofx Ag Rsul Technical data: Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting area flat: 315x40 mm Cutting area square: 120x120 mm Total power requirement: 1.5 kW Space requirement approx.: 1200 x x1000 x 1700 mm Machine weight approx.: 1250 kg Manufacturer's description; The powerful drive provides the prerequisite for high cutting performance, long service life of the saw blades and perfectly clean cut surfaces. All gears are hardened and flank-ground. The entire gearbox runs in an oil bath; all bearing points have roller bearings. Various speeds can be achieved by means of gear wheels, the cutting speeds of which are switched electrically by pole-changing motors. The tried and tested saw blade guide in a strong pivot bearing is subject to practically no wear. It is rigid and allows work within the tightest tolerances. The hydraulic feed of the saw blade is infinitely adjustable according to Skla.

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer - 2-stroke and 4-stroke welding function Djdpfedzqacjx Ag Roul - Remote control with potentiometer for fine adjustment - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Year of construction: 1988, saw blade diameter 0400 mm cutting diameter 140 mm cutting length 140 mm mitre joint cuts -/+ degrees +/-45° cutting capacity - square 130 x 130 mm cutting speed 5 - 30 m/min type of control konvent. voltage 380 V connected load 6 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,5 x 1,5 x 1,5 m Machine has angle cutting arrangement +/- 45°, is semi automatic without material infeed. Dujdpfx Ajxu Nrijg Rjl

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Duodpjxwnz Iofx Ag Rel Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

Condition: new, Bernardo belt sander MS 75 x 2000 S-2 Technical specifications Belt dimensions 75 x 2000 mm Belt speed of 14.5 / 29 m / sec. Dedpfxsd Du S Uo Ag Rjul How to contact with washer ø x W 200 / 80 mm Plan grinding table 460 x 75 mm Suction connection ø 100 mm S1 motor power output 100% 1.5 / 2.2 kW Motor power S6 40% 2,2 / 3,0 kW Voltage 400 V Length 1080 mm Width 440 mm Height 1000 mm Weight 67 kg Scope of delivery • Grinding belt grit 80 • Hinged safety glass • Grinding and supporting table • Workpiece stop • Dust exhaust port • Motor protection switch • Rubber sanding drum • Graphite surface • Separate buttons • Base

Condition: ready for operation (used), Year of construction: 1980, Saw blade diameter: 400 mm Cutting capacity at 90° round: 120 mm Rectangular: 200 x 80 or 150 x 70 mm Mitre cut at 45° rectangular/flat: 150 x 70 mm Upright: 100 x 60 mm 2 cutting speeds via pole-changing motor: 19 and 28 m/min Feed rate hydraulically infinitely adjustable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Duodpfxsx Anl Do Ag Rol Required space: 1200 x 1100 x 1620 mm